<p>8mm diameter precision bearing spacers (Fit most trucks) and 10mm spacing (standard spacing for almost any skateboard & longboard wheels). The wide shoulders ensure a flawless support with the bearings. Benefits of Precision Spacers: Optimized bearing acceleration and speed performance; better preserve the wheels cores and bearings; more precision and grip in turns; slides smoother. <strong>Set of 4</strong></p>
<p>Speed rings to fit on standard 8mm axles. To be placed between the hanger and the inner bearing, / between the outter bearing and the axle nut. Match with most trucks. <strong>Set of 4<br /></strong></p>
<p>10mm X 10mm bearing spacers <span style="color:#ff0000;">Only fits to 10mm axles trucks such as Surf Rodz 10mm, Bear Smokey, Magun </span>Match with most longboard wheels. Set of four</p>
<p>Standard skate bearings spacers. To be used with 8mm axles. Fit on most skateboard and longboard wheels. The spacers will help keeping the bearings in place into the wheels, improving your riding precision. Set of four spacers</p>
<p>Specific 8X8mm aluminium bearings spacers. <span style="color:#d0121a;">Only match with Roller quad wheels and Kryptonic</span>, Cadillac, and Gravity (models 2005 and before) wheels. To be used with 8mm axles. The spacers will help keeping the bearings in place into the wheels, improving your riding precision. Set of four spacers</p>
<p>Bolzen skateboard mounting hardware. Phillips flat head. 1"=>Board without pads; 1.25"=> Board with pads up to 1/4"; 1.75"=> Board with pads up to 1/2"; 2" Board with wedged pads up to 8°; 2.5"=> Board with wedged pads up to 15°; 3"=> Board set with double wedged pads. <strong>Set of 8 bolts & nuts</strong></p>
<p style="margin-bottom:0cm;">Set of eight Longboard skateboard mounting Bolts, nuts, and washers(no washer with 2" bolts sets). Phillips Button Sockets bolts. Can be use on drop through and top mount settings</p>
<p>Flat bushings washers. Small(0.4")=> Best fit with cones bushings; Large(1"): best fit with Barrel bushings. Flat washers would let you trucks lean deeper to compare with a truck using cup washers. Set of four</p>
<p>Independent Genuine Parts Axle Rethreaders feature a pilot shaft that makes it super easy to properly place on and rethread your trucks axles. Package comes with 1 pilot shaft rethreader, 4 fresh axle nuts, and a Genuine Parts sticker.</p>
<p>Made from extremely strong steel (significantly stronger than Grade 8), these Loaded button head bolts integrate the washer into the bolt itself in order to reduce the height of the bolt heads while still distributing load pressure.</p>
<p>Mini Logo Kingpin spare part. Lenght 1.9". The kingpin is the bold that connect the truck's base plate and hanger together. Fit most regular skateboard trucks (Mini Logo, Indepedent, Venture,...)</p>
<p>YOW Bearings & Washers pack for skatesurf system. Spare parts for Your Yow Streetsurf <span style="color:#d0121a;"><strong>V3</strong></span>. Include 2 specifics bearings, washers, 1 bronze sleeve bearing self lub. Those parts should last forever if correctly use. Make sure to never over krank your bearings, and never let any slop in the system.</p>
<p>YOW Bearings & Washers pack for skatesurf system. Spare parts for Your Yow Streetsurf <span style="color:#d0121a;"><strong>V4 & Meraki</strong></span>. Include 2 specifics bearings, washers, 1 bronze sleeve bearing self lub. Those parts should last forever if correctly use. Make sure to never over krank your bearings, and never let any slop in the system.</p>
<p>The Landyachtz Jammer Gravity is a skateboard inspired by the old-school vibes of the 1980s. Designed for both cruising and pulling off tricks wherever you go, your skateboarding journeys will never be more fun! With a wheelbase of 14.1 inches, the Jammer is packed with agility. This board features soft Hawgs Chubby 60mm 78a wheels mounted on Polar Bear 130mm trucks with Bear Spaceballs Abec 7 built-in spacer bearings. Dimensions are 9.2 inches wide by 29.6 inches long, with a wheelbase of 14.1 inches.</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/FsvRrmz_YEw?si=LZ_yPxLw_GNaSmSy" title="YouTube video player" frameborder="0"></iframe></p>
<p>The Landyachtz Tony Danza Texture Flow Graphic is shaped specifically for freestyle and longboard dancing. At 39.9″ long by 8.5″ wide and with griptape only where you need it, this board is perfectly suited to riders who are looking for a board that will flip faster and with less effort than a wider dancing board. It uses a 7 ply Canadian Maple construction to give a nice medium flex feel that returns lots of energy out of each turn but still gives you a confident feeling when landing tricks. Set with the Grizzly Gen 6 50° 155mm trucks, Bear Space ball Bearings, and 63mm Hawgs 78A wheels.</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/-ZsDPt-gJdM" frameborder="0"></iframe></p> <p></p>
<p>Hawgs Doozies are wheels that stand out due to their uncommon proportions. With a 64mm contact patch and a height of 63mm, the Doozies prove to be true bulldozers, unstoppable on or off paved roads. Soft 78A urethane for smooth rides. Center-set bearing placement. Initiating slides is easy, yet you'll maintain the necessary grip when applying pressure during turns. <strong>Set of 4 wheels</strong>.</p>