Longboard skateboard Bushings Cone shape

Bushings Cone shape

skatebard bushing's guide


Active filters

  • Durometer: 70A
  • Durometer: 93A
product name

      RipTide Cones APS...

      <p>RipTide Cones are a classic shape for carving and slalom. It ensure a maximum turnability and rebound. <strong>Set of two (For one truck)</strong></p>
      Price €9.50
      product name

          Riptide Cones KranK...

          <p>RipTide Cones are a classic shape for carving and slalom. It ensure a maximum turnability and rebound. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! Set of 2 bushings(for one truck)</p>
          Price €11.50
          product name

              Riptide Short Street...

              <p>Riptide Short Street Cones APS Bushings. Sized to fit properly in conventional "Indy-style" trucks(Independent, Venture, Thunder, Iron, Tensor,...). Custom APS Urethane Formula for ultra-performance and sweet rebound. 975" Diameter x .4" High (24.77mm Dia x 10.2mm High). We recommend using those Short Street bushings road side, matching with Street Bushings board side. Sold as a pair of 2 bushings with washer cup</p>
              Price €9.50
              product name

                  Riptide Street Barrel/...

                  <p>Riptide Street Barrels/ Short Street Cone combo in APS Formula. Those bushings are a real upgrade for your skateboard trucks. The high quality urethane range from 60A(extremly soft) to 97.5A(Hard), so no matter if you are a yound kid or a fat old guy, you will get the duro that you need. Barrel/ Cone combo is a good mix between stabily and agility. Fit most " indy style" conventional trucks(Indepedendent, Venture, Tensor, Iron, Thunder,...) <strong>Set of 4 cushions with cup washers.</strong></p>
                  Price €18.95
                  product name

                      Riptide Street Cone/...

                      <p>Riptide Street Cones/ Short Street Cones combo in APS Formula. Those bushings are a real upgrade for your skateboard trucks. The high quality urethane range from 60A(extremly soft) to 97.5A(Hard), so no matter if you are a yound kid or a fat old guy, you will get the duro that you need. Cone/ Cone combo works great if your are looking for more agility and deeper lean. Fit most " indy style" conventional trucks(Indepedendent, Venture, Tensor, Iron, Thunder,...) <strong>Set of 4 cushions with cup washers.</strong></p>
                      Price €18.95
                      product name

                          Riptide Tall Cones APS...

                          <p>Tall Cones bushings would fitspecifics trucks such as Ronin, Rogue, Arsenal, Bear Kodiak,... The cone shape would let you turn deeper and works great for carving. APS is a lively and responsive, high-performance urethane with just the right amount of rebound. Very linear in response so you can control the bushing instead of the other way around. <strong>Set of two bushings (For one single truck)</strong></p>
                          Price €10.95
                          product name

                              Riptide Tall Cones...

                              <p>Tall Cones bushings would fitspecifics trucks such as Ronin, Rogue, Arsenal, Bear Kodiak,... The cone shape would let you turn deeper and works great for carving. Riptide highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the kingpin nut!. <strong>Set of two bushings (For one single truck)</strong></p>
                              Price €13.95
                              product name

                                  RipTide Tall Fat Cones...

                                  <p>RipTide Tall Fat Cones has the circumference of a barrel where the bushings sit on the truck, and then gradually widens to the size of a chubby where the washers sit. This gives you the ability to get more lean than a chubby, while giving you progressive resistance the more you turn. APS Urethane. Tall bushings are specificly made for Ronin, Rogue, Bear Kodiak trucks. <strong>Set of two bushings</strong></p>
                                  Price €13.95
                                  product name

                                      Sabre Cones bushings

                                      <p>Set of two Sabre cones bushings (for one trucks). Cones bushings are reactive and allow a maximum lean.</p>
                                      Price €10.00
                                      product name

                                          Sabre King Cones Bushings

                                          <p>New to the Sabre bushings line up, King cone is stable and turny in the same time, perfect for freeriding. <strong>Set of two bushings</strong></p>
                                          Price €10.00
                                          product name

                                              Venom Caliber Plug...

                                              <p>Venom Plug Barrel/cone combo Bushings for Caliber Trucks(Also Fit Bear Grizzly Gen- &amp; Randal III) are designed to remove lateral play from the truck by filling the gaps between the hanger and the kingpin. Resulting in a quicker return to center, increased responsiveness<span class="text_exposed_show">, and a more direct turning feel over a traditional barrel bushing. Now available in 5 different durometers in Venom's classic HPF formula! 1 set= 2 bushings</span></p>
                                              Price €13.95