List of products by brand Riptide

<p>Riptide bushings for Tall format longboard trucks (Ronin, Rogues, Bear Kodiak,...). The barrel shape is the most stable and is the most popular in downhill and freeride longboarding. The WFB rubber (world fastest Bushings) contains a lubricating component in its formula, which gives it better responsiveness and ultra-smooth behavior. <strong>Sold as a pair (For one truck)</strong></p>

<p>Riptide APS formula bushing for Waterborne Surfskate adapter (front). Let's adjust your Waterborne setting to perfectly dial to your weight and style. Durometers from 87.5A (Very soft) to 97.5A (Hard). Made in USA</p>

<p>Set of 4 Riptide Bushings for Waterborne Surfskate rail adaptor (rear truck). APS Formula. Choose from 5 durometers ranging from 87.5A (softer) to 97.5A (harder) and thus fine-tune the setup of your Waterborne surfskate according to your weight and riding style. Pack of 4 0.6" height cushions (2 barrels + 2 cones)</p>

<p>Riptide Tunnel Riser . The Tunnel Riser is designed for eSk8 applications when you want to route wires underneath the trucks for a clean installation on your electric skateboard.  They can also be used on conventional skateboards if you want to route a cable lock under the trucks to discourage theft!  Conform to fit the concave of the board, size 82.55mm x 57.16mm; heights 14mm(0.55"); Weught 36Grs. <strong>Sold individually with a set of 4 2" bolts and nuts</strong></p>

<p>Riptide Tall Fat Cones has the circumference of a barrel where the bushings sit on the truck, and then gradually widens to the size of a chubby where the washers sit. This gives you the ability to get more lean than a chubby, while giving you progressive resistance the more you turn. <span>Krank formula is Riptide's highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut</span>. Tall bushings are specificly made for race trucks such as Ronin, Rogue, Don't Trip, Bear Kodiak trucks. <strong>Set of two bushings</strong></p>

<p>RipTide Tall Fat Cones has the circumference of a barrel where the bushings sit on the truck, and then gradually widens to the size of a chubby where the washers sit. This gives you the ability to get more lean than a chubby, while giving you progressive resistance the more you turn. APS Urethane. Tall bushings are specificly made for Ronin, Rogue, Bear Kodiak trucks. <strong>Set of two bushings</strong></p>

<p>Tall Cones bushings would fitspecifics trucks such as Ronin, Rogue, Arsenal, Bear Kodiak,... The cone shape would let you turn deeper and works great for carving. Riptide highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the kingpin nut!. <strong>Set of two bushings (For one single truck)</strong></p>

<p>Tall Cones bushings would fitspecifics trucks such as Ronin, Rogue, Arsenal, Bear Kodiak,... The cone shape would let you turn deeper and works great for carving. APS is a lively and responsive, high-performance urethane with just the right amount of rebound. Very linear in response so you can control the bushing instead of the other way around. <strong>Set of two bushings (For one single truck)</strong></p>

<p>Riptide Krank Tall barrel bushings. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! Those cushions are specific taller size, made to fit the following trucks: Ronin, Rogue, Arsenal, Bear Kodiak,.. <strong>Set of 2 bushings(for one truck)</strong></p>

<p>Tall Barrels bushings specialy made for Ronin trucks (Cast and Billet). The barrel shape ensure maximum stability for speed and downhill use. APS Urethane. Fit Ronin Trucks, Arsenal Trucks, Bear Kodiak, Rogue,... <strong>Set of two bushings (For one single truck)</strong></p>

<p>Riptide Street Cones APS Bushings. Sized to fit properly in conventional "Indy-style" trucks(Independent, Venture, Thunder, Iron, Tensor,...). Custom APS Urethane Formula for ultra-performance and sweet rebound. 975" Diameter x .5" High (24.77mm Dia x 12.7mm High). We recommend using those Street bushings board side, matching with Street Short Bushings road side. The Cone's shape is turnier and will let you turn deeper. Sold as a pair of 2 bushings with washer cup</p>

<p>Riptide Street Cones/ Short Street Cones combo in APS Formula. Those bushings are a real upgrade for your skateboard trucks. The high quality urethane range from 60A(extremly soft) to 97.5A(Hard), so no matter if you are a yound kid or a fat old guy, you will get the duro that you need. Cone/ Cone combo works great if your are looking for more agility and deeper lean. Fit most " indy style" conventional trucks(Indepedendent, Venture, Tensor, Iron, Thunder,...) <strong>Set of 4 cushions with cup washers.</strong></p>

<p>Set of two RipTide Street Chubby APS Bushings specialy made to fit on Independent trucks</p> <p>Include 2 bushings and 2 flat washer rings</p>

<p>Riptide Street Barrels APS Bushings. Sized to fit properly in conventional "Indy-style" trucks(Independent, Venture, Thunder, Iron, Tensor,...). Custom APS Urethane Formula for ultra-performance and sweet rebound. 975" Diameter x .5" High (24.77mm Dia x 12.7mm High). We recommend using those Street bushings board side, matching with Street Short Bushings road side. Sold as a pair of 2 bushings with washer cup</p>

<p>Riptide Street Barrel/Short Street Cone Bushing Kit Krank formula. Combines stability and agility. Bushings specially designed for skateboards &amp; cruisers truck (Independent, Venture, Thunder, Iron, Tensor, Bear Polar, Enuff...), also compatible with Yow trucks. Riptide bushings are of excellent quality and enhance truck performance by adjusting to weight and riding style. The Krank formula reacts to clamp pressure to provide optimal adjustment for each individual. Quick return to the initial position. <strong>Set of 4 bushings and cups (for 2 trucks).</strong></p>

<p>Riptide Street Barrels/ Short Street Cone combo in APS Formula. Those bushings are a real upgrade for your skateboard trucks. The high quality urethane range from 60A(extremly soft) to 97.5A(Hard), so no matter if you are a yound kid or a fat old guy, you will get the duro that you need. Barrel/ Cone combo is a good mix between stabily and agility. Fit most " indy style" conventional trucks(Indepedendent, Venture, Tensor, Iron, Thunder,...) <strong>Set of 4 cushions with cup washers.</strong></p>

<p><span style="font-size:medium;font-family:arial, helvetica, sans-serif;">Riptide Speed Wet Bearing Lube. Very low-viscosity lube that is barely affected by temperature. In addition to the multiple types of oil in the blend and the ratio of each in Wet and Dry, a submicron dry lubricant that has a far lower coefficient of friction (COF) than Teflon has been added.  This allows the bearings to stay at peek efficiency longer. 1 Oz(30ml)<br /></span></p>

<p><span style="font-size:medium;font-family:arial, helvetica, sans-serif;">Riptide Speed Dry Bearing Lube. Very low-viscosity lube that is barely affected by temperature. In addition to the multiple types of oil in the blend and the ratio of each in Wet and Dry, a submicron dry lubricant that has a far lower coefficient of friction (COF) than Teflon has been added.  This allows the bearings to stay at peek efficiency longer. 1 Oz(30ml)<br /></span></p>

<p>Riptide Slab foot stop developed jointly with Ambroise Trauet (record holder for the fastest toeside stand up slide in the world with 117.35Km/h). Polyurethane stopper delivered with 3 delrin raising discs, which allows the foot stop to be placed either fixedly directly in contact with the board, or pivoting raised by 3, 4, 5, 7, 8, 9, or 12mm. Helps keep the foot in place while remaining mobile. A must have when tackling committed downhill or freeride.</p>

<p>Riptide Short Street Cones APS Bushings. Sized to fit properly in conventional "Indy-style" trucks(Independent, Venture, Thunder, Iron, Tensor,...). Custom APS Urethane Formula for ultra-performance and sweet rebound. 975" Diameter x .4" High (24.77mm Dia x 10.2mm High). We recommend using those Short Street bushings road side, matching with Street Bushings board side. Sold as a pair of 2 bushings with washer cup</p>

<p>Riptide Short Street Barrels bushings. Fit most TKP  street &amp; cruisers Trucks. Use the short Street barrel road side, in addition with a <a href="https://fulkit-skateboards.com/en/bushings/4330-55726-riptide-street-barrels-aps-skateboard-bushings.html">street barrel</a> or <a href="https://fulkit-skateboards.com/en/bushings/377-558-riptide-street-chubby-aps.html">street chubby</a> board side. Barrels maximize the stabily and reduce the truck's lean. APS Formula with a large choice of durometers ranging from 60A(Very soft) to 97.5A(Very Hard). <strong>Set of 2 bushings with flat washers</strong></p>

<p>The PSD foot stops are made out of extra hard urethane by the renown bushings company RipTide. The foot stop helps you keeping your front foot in locked place while sliding or cornering. In and out shape gives you various placement options to dial with your riding style. Sold as one foot stop including a long bolt</p>

<p>The PSD foot stops are made out of extra hard urethane by the renown bushings company RipTide.</p> <p style="margin-bottom:0cm;">The foot stop helps you keeping your front foot in locked place while sliding or cornering.</p> <p style="margin-bottom:0cm;">Sold as one foot stop including a long bolt</p>

<p>Riptide PSD Aero Clear foot stop</p>

<p><span style="font-family:Arial;font-size:12pt;">RipTide Pivot Tubes are the result of two years of beta testing . RipTide's Pivot Tubes are specifically designed for Valkyrie Voxter Trucks. RipTide's exclusive internally lubricated WFB Urethane in 96a offer smouth turning while the Tube offers lower friction due to the reduced surface contact with the nose of the hanger.</span> <strong>Solde as a pair</strong></p> <p><strong></strong></p>

<p><span style="font-family:Arial;font-size:12pt;">RipTide Pivot cups &amp;Tubes are the result of two years of beta testing . RipTide's Ronin Pivots are specifically designed for Ronin trucks (Cast &amp; Precision). RipTide's exclusive internally lubricated WFB Urethane in 96a offer smouth turning while the Tube offers lower friction due to the reduced surface contact with the nose of the hanger.</span> Sol as a pair</p>

<p><span style="font-family:Arial;font-size:12pt;">RipTide Pivot Tubes are the result of two years of beta testing . RipTide's Don't Trip Pivots are specifically designed for Don't Trip Trucks. RipTide's exclusive internally lubricated WFB Urethane in 96a offer smouth turning while the Tube offers lower friction due to the reduced surface contact with the nose of the hanger.</span> <strong>Solde as a pair</strong></p>

<p>Riptide precision pivot tubes for Zealous downhill slalom trucks. Made from WFB 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Solde as a pair</strong></p> <p><strong></strong></p>

<p><span style="font-family:Arial;font-size:12pt;">RipTide Pivot cups &amp;Tubes are the result of two years of beta testing . RipTide's Aera Pivots are specifically designed for Aera Trucks(K1 to K4). RipTide's exclusive internally lubricated WFB Urethane in 96a offer smouth turning while the Tube offers lower friction due to the reduced surface contact with the nose of the hanger.</span> <strong>Solde as a pair</strong></p>

<p>Riptide Pivot Cups for Tracker RT-X trucks. Made of urethane 96a, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p> <p></p>

<p>Riptide Pivot Cups for Tracker RT-S &amp; Dart trucks. Made of urethane 96a, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p> <p></p>

<p>Riptide Pivot Cups for Tensor Aluminium &amp; Mag Light trucks. Made from 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Riptide Pivot Cups for Paris V3 trucks. Made of urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Riptide Pivot Cups for Paris Trucks V1, V2 &amp; Street. Made of urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Riptide Pivot Cups for Mini Logo trucks. Made from 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Riptide Pivot Cups for Yow surfskate trucks. Made from WFB 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p> <p></p>

<p>Riptide Pivot Cups for Venture trucks. Made from 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Riptide Pivot Cups for Thunder trucks. Made from 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Riptide precision Pivot Cups for Slant RKP longboard trucks (Trucks that are set on most Glove complete Longboards). The pivot cup is the small cushion that is placed between the truck's baseplate &amp; hanger. Made from WFB 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p> <p><strong></strong></p> <p></p> <p></p>

<p>Riptide Pivot Cups for Skoa trucks. Made from WFB 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p> <p></p>

<p>Riptide Pivot Cups for Seismic Aeon trucks. Made from WFB 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p> <p></p>

<p>Riptide Pivot Cups for Rogue trucks. Made from 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Riptide Pivot Cups for Randal II &amp; III, Surf Rodz TKP &amp; RKP,Wefunk trucks. Made from WFB 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p> <p><strong></strong></p> <p></p> <p></p>

<p>Riptide precision Pivot Cups for Luxe &amp; Luxe Lite RKP longboard trucks. Made from WFB 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p> <p><strong></strong></p> <p></p> <p></p>

<p>Riptide Pivot Cups for Independent  and Bennett trucks. Made from 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Riptide Pivot Cups for Evolve &amp; Gullwing Sidewinder trucks. Made from WFB 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p> <p></p> <p></p>

<p>Riptide Pivot Cups for Boosted trucks. Made from WFB 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p> <p></p> <p></p>

<p>Riptide Pivot Cups for Bolzen trucks. Made from WFB 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p> <p></p>

<p>Riptide Pivot Cups for Bear Polar trucks. Made from 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Riptide Pivot Cups for Bear Grizzly Gen5, Gen6, Kodiak, &amp; Precision trucks. Made from WFB 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p> <p></p>