List of products by brand Riptide

<p>RipTide Cubes Bushings, specialy made for specific square bushings sits Rey Trucks, allow you to change the feel of your ride simply by altering the orientation of the bushing in the bushing seat! <strong>Set of two bushings</strong></p>

<p>Riptide APS formula bushing for Waterborne Surfskate adapter (front). Let's adjust your Waterborne setting to perfectly dial to your weight and style. Durometers from 87.5A (Very soft) to 97.5A (Hard). Made in USA</p>

<p>The Canon bushings are the equivalent to Riptides standard Barrel Bushing sized specifically for the seat of Paris Trucks.<strong> Set of two bushings</strong></p>

<p>RipTide Cones are a classic shape for carving and slalom. It ensure a maximum turnability and rebound. <strong>Set of two (For one truck)</strong></p>

<p>Riptide Short Street Barrels bushings. Fit most TKP  street &amp; cruisers Trucks. Use the short Street barrel road side, in addition with a <a href="https://fulkit-skateboards.com/en/bushings/4330-55726-riptide-street-barrels-aps-skateboard-bushings.html">street barrel</a> or <a href="https://fulkit-skateboards.com/en/bushings/377-558-riptide-street-chubby-aps.html">street chubby</a> board side. Barrels maximize the stabily and reduce the truck's lean. APS Formula with a large choice of durometers ranging from 60A(Very soft) to 97.5A(Very Hard). <strong>Set of 2 bushings with flat washers</strong></p>

<p>Riptide Street Cones APS Bushings. Sized to fit properly in conventional "Indy-style" trucks(Independent, Venture, Thunder, Iron, Tensor,...). Custom APS Urethane Formula for ultra-performance and sweet rebound. 975" Diameter x .5" High (24.77mm Dia x 12.7mm High). We recommend using those Street bushings board side, matching with Street Short Bushings road side. The Cone's shape is turnier and will let you turn deeper. Sold as a pair of 2 bushings with washer cup</p>

<p>Riptide Short Street Cones APS Bushings. Sized to fit properly in conventional "Indy-style" trucks(Independent, Venture, Thunder, Iron, Tensor,...). Custom APS Urethane Formula for ultra-performance and sweet rebound. 975" Diameter x .4" High (24.77mm Dia x 10.2mm High). We recommend using those Short Street bushings road side, matching with Street Bushings board side. Sold as a pair of 2 bushings with washer cup</p>

<p>Riptide Street Barrels APS Bushings. Sized to fit properly in conventional "Indy-style" trucks(Independent, Venture, Thunder, Iron, Tensor,...). Custom APS Urethane Formula for ultra-performance and sweet rebound. 975" Diameter x .5" High (24.77mm Dia x 12.7mm High). We recommend using those Street bushings board side, matching with Street Short Bushings road side. Sold as a pair of 2 bushings with washer cup</p>

<p>The Barrels are a classic shape for Downhill and freeriding. It ensure a maximum of stability at high speed.</p> <p>Set of two (For one truck)</p>

<p><span style="font-size:medium;">Riptide Komotion Cog-Shaped Grooved Foot Stop. </span><span style="font-size:medium;"><span style="font-size:medium;">Sold Individually with a washer, 1.75" bolt, nut, &amp; a RipTide sticker.</span></span></p>

<p>Tall Barrels bushings specialy made for Ronin trucks (Cast and Billet). The barrel shape ensure maximum stability for speed and downhill use. APS Urethane. Fit Ronin Trucks, Arsenal Trucks, Bear Kodiak, Rogue,... <strong>Set of two bushings (For one single truck)</strong></p>

<p>Tall Cones bushings would fitspecifics trucks such as Ronin, Rogue, Arsenal, Bear Kodiak,... The cone shape would let you turn deeper and works great for carving. APS is a lively and responsive, high-performance urethane with just the right amount of rebound. Very linear in response so you can control the bushing instead of the other way around. <strong>Set of two bushings (For one single truck)</strong></p>

<p>Riptide Bushings for Carver CX &amp; C5 Surfskate Trucks. Designed with perfect shape and dimensions to optimize Carver trucks performance. Riptide APS Bushings are available in 5 hardness levels ranging from 85A (softer) to 95A (harder) to meet everyone's expectations. Cone shape, 0.65" (16.5mm) height on the board side and 0.58" (14.7mm) height on the road side. These bushings are comfortable and does not squeeze noise. <strong>Sold in sets of 2 (for one truck).</strong></p>

<p><span>Riptide Fat Cones have the same initial stability as a Barrel but as you lean, they offer progressively higher resistance the further you go.  <span>The Barrel / FatCone setup</span><span> is for those looking for higher stability at higher speeds but still highly maneuverable for slides, high speed carving and downhill applications.  This setup is ideal when you need to restrict the ends of the lean to prevent wheelbite or if you just like a more progressive feel to your setup. APS Formula. Set of 2 bushings with washers</span></span><strong></strong></p>

<p>Set of two RipTide Street Chubby APS Bushings specialy made to fit on Independent trucks</p> <p>Include 2 bushings and 2 flat washer rings</p>

<p>The Barrels are a classic shape for Downhill and freeriding. It ensure a maximum of stability at high speed. Set of two (For ine truck)</p>

<p>The magnum bushings are an adaptation to Riptides Chubby Bushing sized specifically for the seat of Paris Trucks.</p> <p>Set of two bushings (For one truck)</p>

<p>Riptide Krank Canon bushings. Barrel shape with specific size for perfect fit on Paris V2 Trucks. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! Set of 2 bushings(for one truck)</p>

<p>RipTide Cones are a classic shape for carving and slalom. It ensure a maximum turnability and rebound. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! Set of 2 bushings(for one truck)</p>

<p>Riptide Krank barrel bushings. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! <strong>Set of 2 bushings(for one truck)</strong></p>

<p>Riptide Chubby APS step barrel bushings. The hallmark of this shape is its stability - provides an extremely stable platform boardside. Progressive resistance to lean but still very supple. Works well with restrictive, as well as non-restrictive, bushings seats. Supplied with stainless steel fender washers. <strong>Set of 2</strong></p>

<p>The Canon bushings are the equivalent to Riptides standard Barrel Bushing sized specifically for the seat of Paris Trucks. <strong>Set of Two (for one trucks)</strong></p>

<div>Riptide APS Kore Inserts. Used to replace Spherical bearings in trucks that use them in the hanger. Dimensions of the Kores are .8125" (20.63mm) OD x .373" (9.47mm) ID x .375" (9.53mm) high. Fit on: Bear Smokey, Buzzed Niko, Don’t Trip — ANY MODEL WITH SPHERICAL, Radikal — ANY MODEL WITH SPHERICAL, Rogue, Sk8kings 2X. <strong>Set of two kore inserts</strong></div>

<p>The PSD foot stops are made out of extra hard urethane by the renown bushings company RipTide. The foot stop helps you keeping your front foot in locked place while sliding or cornering. In and out shape gives you various placement options to dial with your riding style. Sold as one foot stop including a long bolt</p>

<p><span style="font-size:medium;font-family:arial, helvetica, sans-serif;">Riptide Speed Wet Bearing Lube. Very low-viscosity lube that is barely affected by temperature. In addition to the multiple types of oil in the blend and the ratio of each in Wet and Dry, a submicron dry lubricant that has a far lower coefficient of friction (COF) than Teflon has been added.  This allows the bearings to stay at peek efficiency longer. 1 Oz(30ml)<br /></span></p>

<p><span style="font-size:medium;font-family:arial, helvetica, sans-serif;">Riptide Speed Dry Bearing Lube. Very low-viscosity lube that is barely affected by temperature. In addition to the multiple types of oil in the blend and the ratio of each in Wet and Dry, a submicron dry lubricant that has a far lower coefficient of friction (COF) than Teflon has been added.  This allows the bearings to stay at peek efficiency longer. 1 Oz(30ml)<br /></span></p>

<p>RipTide Tall Fat Cones has the circumference of a barrel where the bushings sit on the truck, and then gradually widens to the size of a chubby where the washers sit. This gives you the ability to get more lean than a chubby, while giving you progressive resistance the more you turn. APS Urethane. Tall bushings are specificly made for Ronin, Rogue, Bear Kodiak trucks. <strong>Set of two bushings</strong></p>

<p>Tall Cones bushings would fitspecifics trucks such as Ronin, Rogue, Arsenal, Bear Kodiak,... The cone shape would let you turn deeper and works great for carving. Riptide highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the kingpin nut!. <strong>Set of two bushings (For one single truck)</strong></p>

<p>Riptide Krank Tall barrel bushings. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! Those cushions are specific taller size, made to fit the following trucks: Ronin, Rogue, Arsenal, Bear Kodiak,.. <strong>Set of 2 bushings(for one truck)</strong></p>

<p>Riptide bushings for Tall format longboard trucks (Ronin, Rogues, Bear Kodiak,...). The barrel shape is the most stable and is the most popular in downhill and freeride longboarding. The WFB rubber (world fastest Bushings) contains a lubricating component in its formula, which gives it better responsiveness and ultra-smooth behavior. <strong>Sold as a pair (For one truck)</strong></p>

<p><span style="font-family:Arial;font-size:12pt;">RipTide Pivot Tubes are the result of two years of beta testing . RipTide's Pivot Tubes are specifically designed for Valkyrie Voxter Trucks. RipTide's exclusive internally lubricated WFB Urethane in 96a offer smouth turning while the Tube offers lower friction due to the reduced surface contact with the nose of the hanger.</span> <strong>Solde as a pair</strong></p> <p><strong></strong></p>

<p><span style="font-family:Arial;font-size:12pt;">RipTide Pivot cups &amp;Tubes are the result of two years of beta testing . RipTide's Aera Pivots are specifically designed for Aera Trucks(K1 to K4). RipTide's exclusive internally lubricated WFB Urethane in 96a offer smouth turning while the Tube offers lower friction due to the reduced surface contact with the nose of the hanger.</span> <strong>Solde as a pair</strong></p>

<p><span style="font-family:Arial;font-size:12pt;">RipTide Pivot cups &amp;Tubes are the result of two years of beta testing . RipTide's Ronin Pivots are specifically designed for Ronin trucks (Cast &amp; Precision). RipTide's exclusive internally lubricated WFB Urethane in 96a offer smouth turning while the Tube offers lower friction due to the reduced surface contact with the nose of the hanger.</span> Sol as a pair</p>

<p><span style="font-family:Arial;font-size:12pt;">RipTide Pivot Tubes are the result of two years of beta testing . RipTide's Don't Trip Pivots are specifically designed for Don't Trip Trucks. RipTide's exclusive internally lubricated WFB Urethane in 96a offer smouth turning while the Tube offers lower friction due to the reduced surface contact with the nose of the hanger.</span> <strong>Solde as a pair</strong></p>

<p>The Magnum bushings are an adaptation to Riptides Chubby Bushing sized specifically for the seat of Paris® Trucks.</p> <p>Set of 2 bushings (for one truck)</p>

<p><span>Riptide Fat Cones have the same initial stability as a Barrel but as you lean, they offer progressively higher resistance the further you go.  <span>The Barrel / FatCone setup</span><span> is for those looking for higher stability at higher speeds but still highly maneuverable for slides, high speed carving and downhill applications.  This setup is ideal when you need to restrict the ends of the lean to prevent wheelbite or if you just like a more progressive feel to your setup. Krank Formula. Set of 2 bushings with washers</span></span></p>

<p>The hallmark of this shape is its stability - provides an extremely stable platform boardside. Progressive resistance to lean but still very supple.</p> <p>Set of two (For ine truck)</p>

<p>Riptide Pivot Cups for Ace Skateboard trucks. Made from 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Riptide Pivot Cups for Bear old generations(before 2014). Size: External diamter: 18.8mm; Internal Diameter: 11.7mm; Heigth:16mm. Made from WFB 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p> <p></p> <p></p>

<p>Riptide Pivot Cups for Tensor Aluminium &amp; Mag Light trucks. Made from 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Riptide Pivot Cups for Mini Logo trucks. Made from 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Riptide Pivot Cups for Bolzen trucks. Made from WFB 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p> <p></p>

<p>Riptide Pivot Cups for Yow surfskate trucks. Made from WFB 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p> <p></p>

<p>Riptide Pivot Cups for Seismic Aeon trucks. Made from WFB 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p> <p></p>

<p>Riptide precision Pivot Cups for Luxe &amp; Luxe Lite RKP longboard trucks. Made from WFB 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p> <p><strong></strong></p> <p></p> <p></p>

<p>Riptide precision Pivot Cups for Slant RKP longboard trucks (Trucks that are set on most Glove complete Longboards). The pivot cup is the small cushion that is placed between the truck's baseplate &amp; hanger. Made from WFB 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p> <p><strong></strong></p> <p></p> <p></p>

<p>Riptide Pivot Cups for Film skateboard trucks. Made from 96a urethane, cups helps trucks being more accurate, avoid squeezy noise and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Riptide precision pivot tubes for Zealous downhill slalom trucks. Made from WFB 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Solde as a pair</strong></p> <p><strong></strong></p>

<p>Riptide Pivot Street Cups for Caliber Standard(Street) trucks. Made of urethane 96a, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p> <p></p>

<p>Riptide Pivot Cups for Tracker RT-X trucks. Made of urethane 96a, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p> <p></p>