List of products by brand Riptide

<p>Riptide Bushings for Carver CX &amp; C5 Surfskate Trucks. Designed with perfect shape and dimensions to optimize Carver trucks performance. Riptide APS Bushings are available in 5 hardness levels ranging from 85A (softer) to 95A (harder) to meet everyone's expectations. Cone shape, 0.65" (16.5mm) height on the board side and 0.58" (14.7mm) height on the road side. These bushings are comfortable and does not squeeze noise. <strong>Sold in sets of 2 (for one truck).</strong></p>

<p>Riptide Street Barrels/ Short Street Cone combo in APS Formula. Those bushings are a real upgrade for your skateboard trucks. The high quality urethane range from 60A(extremly soft) to 97.5A(Hard), so no matter if you are a yound kid or a fat old guy, you will get the duro that you need. Barrel/ Cone combo is a good mix between stabily and agility. Fit most " indy style" conventional trucks(Indepedendent, Venture, Tensor, Iron, Thunder,...) <strong>Set of 4 cushions with cup washers.</strong></p>

<p>The Barrels are a classic shape for Downhill and freeriding. It ensure a maximum of stability at high speed.</p> <p>Set of two (For one truck)</p>

<p>RipTide Cones are a classic shape for carving and slalom. It ensure a maximum turnability and rebound. <strong>Set of two (For one truck)</strong></p>

<p>Tall Barrels bushings specialy made for Ronin trucks (Cast and Billet). The barrel shape ensure maximum stability for speed and downhill use. APS Urethane. Fit Ronin Trucks, Arsenal Trucks, Bear Kodiak, Rogue,... <strong>Set of two bushings (For one single truck)</strong></p>

<p>Riptide Krank barrel bushings. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! <strong>Set of 2 bushings(for one truck)</strong></p>

<p>Riptide Short Street Barrels bushings. Fit most TKP  street &amp; cruisers Trucks. Use the short Street barrel road side, in addition with a <a href="https://fulkit-skateboards.com/en/bushings/4330-55726-riptide-street-barrels-aps-skateboard-bushings.html">street barrel</a> or <a href="https://fulkit-skateboards.com/en/bushings/377-558-riptide-street-chubby-aps.html">street chubby</a> board side. Barrels maximize the stabily and reduce the truck's lean. APS Formula with a large choice of durometers ranging from 60A(Very soft) to 97.5A(Very Hard). <strong>Set of 2 bushings with flat washers</strong></p>

<p>Riptide APS formula bushing for Waterborne Surfskate adapter (front). Let's adjust your Waterborne setting to perfectly dial to your weight and style. Durometers from 87.5A (Very soft) to 97.5A (Hard). Made in USA</p>

<p>The Canon bushings are the equivalent to Riptides standard Barrel Bushing sized specifically for the seat of Paris Trucks.<strong> Set of two bushings</strong></p>

<p>Tall Cones bushings would fitspecifics trucks such as Ronin, Rogue, Arsenal, Bear Kodiak,... The cone shape would let you turn deeper and works great for carving. APS is a lively and responsive, high-performance urethane with just the right amount of rebound. Very linear in response so you can control the bushing instead of the other way around. <strong>Set of two bushings (For one single truck)</strong></p>

<p>Riptide Krank Canon bushings. Barrel shape with specific size for perfect fit on Paris V2 Trucks. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! Set of 2 bushings(for one truck)</p>

<p>Riptide Street Cones/ Short Street Cones combo in APS Formula. Those bushings are a real upgrade for your skateboard trucks. The high quality urethane range from 60A(extremly soft) to 97.5A(Hard), so no matter if you are a yound kid or a fat old guy, you will get the duro that you need. Cone/ Cone combo works great if your are looking for more agility and deeper lean. Fit most " indy style" conventional trucks(Indepedendent, Venture, Tensor, Iron, Thunder,...) <strong>Set of 4 cushions with cup washers.</strong></p>

<p>Riptide Krank Tall barrel bushings. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! Those cushions are specific taller size, made to fit the following trucks: Ronin, Rogue, Arsenal, Bear Kodiak,.. <strong>Set of 2 bushings(for one truck)</strong></p>

<p>Riptide Short Street Cones APS Bushings. Sized to fit properly in conventional "Indy-style" trucks(Independent, Venture, Thunder, Iron, Tensor,...). Custom APS Urethane Formula for ultra-performance and sweet rebound. 975" Diameter x .4" High (24.77mm Dia x 10.2mm High). We recommend using those Short Street bushings road side, matching with Street Bushings board side. Sold as a pair of 2 bushings with washer cup</p>

<p>Riptide Street Cones APS Bushings. Sized to fit properly in conventional "Indy-style" trucks(Independent, Venture, Thunder, Iron, Tensor,...). Custom APS Urethane Formula for ultra-performance and sweet rebound. 975" Diameter x .5" High (24.77mm Dia x 12.7mm High). We recommend using those Street bushings board side, matching with Street Short Bushings road side. The Cone's shape is turnier and will let you turn deeper. Sold as a pair of 2 bushings with washer cup</p>

<p>RipTide Tall Fat Cones has the circumference of a barrel where the bushings sit on the truck, and then gradually widens to the size of a chubby where the washers sit. This gives you the ability to get more lean than a chubby, while giving you progressive resistance the more you turn. APS Urethane. Tall bushings are specificly made for Ronin, Rogue, Bear Kodiak trucks. <strong>Set of two bushings</strong></p>

<p><span>Riptide Fat Cones have the same initial stability as a Barrel but as you lean, they offer progressively higher resistance the further you go.  <span>The Barrel / FatCone setup</span><span> is for those looking for higher stability at higher speeds but still highly maneuverable for slides, high speed carving and downhill applications.  This setup is ideal when you need to restrict the ends of the lean to prevent wheelbite or if you just like a more progressive feel to your setup. APS Formula. Set of 2 bushings with washers</span></span><strong></strong></p>

<p>Riptide Street Barrels APS Bushings. Sized to fit properly in conventional "Indy-style" trucks(Independent, Venture, Thunder, Iron, Tensor,...). Custom APS Urethane Formula for ultra-performance and sweet rebound. 975" Diameter x .5" High (24.77mm Dia x 12.7mm High). We recommend using those Street bushings board side, matching with Street Short Bushings road side. Sold as a pair of 2 bushings with washer cup</p>

<p>Set of 4 Riptide Bushings for Waterborne Surfskate rail adaptor (rear truck). APS Formula. Choose from 5 durometers ranging from 87.5A (softer) to 97.5A (harder) and thus fine-tune the setup of your Waterborne surfskate according to your weight and riding style. Pack of 4 0.6" height cushions (2 barrels + 2 cones)</p>

<p>Riptide Chubby APS step barrel bushings. The hallmark of this shape is its stability - provides an extremely stable platform boardside. Progressive resistance to lean but still very supple. Works well with restrictive, as well as non-restrictive, bushings seats. Supplied with stainless steel fender washers. <strong>Set of 2</strong></p>

<p>RipTide Cones are a classic shape for carving and slalom. It ensure a maximum turnability and rebound. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! Set of 2 bushings(for one truck)</p>

<p>The magnum bushings are an adaptation to Riptides Chubby Bushing sized specifically for the seat of Paris Trucks.</p> <p>Set of two bushings (For one truck)</p>

<p>RipTide Cubes Bushings, specialy made for specific square bushings sits Rey Trucks, allow you to change the feel of your ride simply by altering the orientation of the bushing in the bushing seat! <strong>Set of two bushings</strong></p>

<p>Riptide Slab foot stop developed jointly with Ambroise Trauet (record holder for the fastest toeside stand up slide in the world with 117.35Km/h). Polyurethane stopper delivered with 3 delrin raising discs, which allows the foot stop to be placed either fixedly directly in contact with the board, or pivoting raised by 3, 4, 5, 7, 8, 9, or 12mm. Helps keep the foot in place while remaining mobile. A must have when tackling committed downhill or freeride.</p>

<p>The Barrels are a classic shape for Downhill and freeriding. It ensure a maximum of stability at high speed. Set of two (For ine truck)</p>

<p>Riptide Pivot Cups for Independent  and Bennett trucks. Made from 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p><span>Riptide Fat Cones have the same initial stability as a Barrel but as you lean, they offer progressively higher resistance the further you go.  <span>The Barrel / FatCone setup</span><span> is for those looking for higher stability at higher speeds but still highly maneuverable for slides, high speed carving and downhill applications.  This setup is ideal when you need to restrict the ends of the lean to prevent wheelbite or if you just like a more progressive feel to your setup. Krank Formula. Set of 2 bushings with washers</span></span></p>

<p>Riptide Pivot Cups for Yow surfskate trucks. Made from WFB 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p> <p></p>

<p>Riptide Pivot Cups for Carver CX.4/C2.4 trucks. Made of urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Riptide Pivot Cups for Caliber II &amp; III trucks. Made of urethane 96a, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cup.</strong></p>

<p>Riptide Pivot Cups for Paris V1 &amp; V2 V2 trucks. Made of urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Tall Cones bushings would fitspecifics trucks such as Ronin, Rogue, Arsenal, Bear Kodiak,... The cone shape would let you turn deeper and works great for carving. Riptide highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the kingpin nut!. <strong>Set of two bushings (For one single truck)</strong></p>

<p>Riptide Street Barrels/ Cones bushings combo speciflicly deisigned to fit Penny cruiser's trucks. APS Formula. Those bushings are a real upgrade for your cruiser's trucks. The high quality urethane range from 75A(softer) to 90A(Medium). Barrel/ Cone combo is a good mix between stabily and agility. Heights: Barrel 0.55" / Cone 0.5". <strong>Set of 4 cushions.</strong></p>

<p>The Canon bushings are the equivalent to Riptides standard Barrel Bushing sized specifically for the seat of Paris Trucks. <strong>Set of Two (for one trucks)</strong></p>

<p>Set of two RipTide Street Chubby APS Bushings specialy made to fit on Independent trucks</p> <p>Include 2 bushings and 2 flat washer rings</p>

<p>Riptide bushings for Tall format longboard trucks (Ronin, Rogues, Bear Kodiak,...). The barrel shape is the most stable and is the most popular in downhill and freeride longboarding. The WFB rubber (world fastest Bushings) contains a lubricating component in its formula, which gives it better responsiveness and ultra-smooth behavior. <strong>Sold as a pair (For one truck)</strong></p>

<p>The PSD foot stops are made out of extra hard urethane by the renown bushings company RipTide.</p> <p style="margin-bottom:0cm;">The foot stop helps you keeping your front foot in locked place while sliding or cornering.</p> <p style="margin-bottom:0cm;">Sold as one foot stop including a long bolt</p>

<p>Riptide Tall Fat Cones has the circumference of a barrel where the bushings sit on the truck, and then gradually widens to the size of a chubby where the washers sit. This gives you the ability to get more lean than a chubby, while giving you progressive resistance the more you turn. <span>Krank formula is Riptide's highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut</span>. Tall bushings are specificly made for race trucks such as Ronin, Rogue, Don't Trip, Bear Kodiak trucks. <strong>Set of two bushings</strong></p>

<p>Riptide 50-55 Cones/Barrels Krank Roller skate cushions. Fits Powerdyne Reactor Neo &amp; Fuse, Powerdyne Thrust (Riedell R3 skates), Impala, Pilot Viper, Suregrip Avenger &amp; Avanti, Bont Prodigy plates. Barrel .55" bushing to be placed on the shoe side, and cone 0.50" bushing to be placed on the ground side. The Krank formula is best for Roller Derby and Park skating. Suitable for agressive riding style, strong edge support, speed. Riptide is a specialized &amp; leading brand in the production of precision bushings for roller sports. <strong>Set of 8 bushings (4 cones and 4 cylinders) + cups, enough to equip one pair of skates</strong></p>

<p>The Magnum bushings are an adaptation to Riptides Chubby Bushing sized specifically for the seat of Paris® Trucks.</p> <p>Set of 2 bushings (for one truck)</p>

<p>Riptide Pivot Cups for Paris V3 trucks. Made of urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Riptide Pivot Cups for Bear Grizzly Gen5, Gen6, Kodiak, &amp; Precision trucks. Made from WFB 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p> <p></p>

<p>Riptide Street Barrel/Short Street Cone Bushing Kit Krank formula. Combines stability and agility. Bushings specially designed for skateboards &amp; cruisers truck (Independent, Venture, Thunder, Iron, Tensor, Bear Polar, Enuff...), also compatible with Yow trucks. Riptide bushings are of excellent quality and enhance truck performance by adjusting to weight and riding style. The Krank formula reacts to clamp pressure to provide optimal adjustment for each individual. Quick return to the initial position. <strong>Set of 4 bushings and cups (for 2 trucks).</strong></p>

<div>Riptide APS Kore Inserts. Used to replace Spherical bearings in trucks that use them in the hanger. Dimensions of the Kores are .8125" (20.63mm) OD x .373" (9.47mm) ID x .375" (9.53mm) high. Fit on: Bear Smokey, Buzzed Niko, Don’t Trip — ANY MODEL WITH SPHERICAL, Radikal — ANY MODEL WITH SPHERICAL, Rogue, Sk8kings 2X. <strong>Set of two kore inserts</strong></div>

<p>The PSD foot stops are made out of extra hard urethane by the renown bushings company RipTide. The foot stop helps you keeping your front foot in locked place while sliding or cornering. In and out shape gives you various placement options to dial with your riding style. Sold as one foot stop including a long bolt</p>

<p><span style="font-size:medium;font-family:arial, helvetica, sans-serif;">Riptide Speed Dry Bearing Lube. Very low-viscosity lube that is barely affected by temperature. In addition to the multiple types of oil in the blend and the ratio of each in Wet and Dry, a submicron dry lubricant that has a far lower coefficient of friction (COF) than Teflon has been added.  This allows the bearings to stay at peek efficiency longer. 1 Oz(30ml)<br /></span></p>

<p>Cushions Riptide 50-55 APS for roller skates. Compatible with Powerdyne Reactor Neo &amp; Fuse plates, Powerdyne Thrust (Riedell R3 &amp; Moxi Lolly skates), Impala, Pilot Viper, Suregrip Avenger &amp; Avanti, Bont Prodigy. The cylindrical gum height is .55" to be placed on the shoe side, and the cone height is 0.50" to be placed on the ground side. The APS formula is perfectly suited for outdoor skating. It provides superior comfort, perfect balance &amp; flow, quick rebound. <strong>Set of 8 cushions (4 cones and 4 cylinders) + cups, enough to equip a pair of skates.</strong></p>

<p>Riptide Pivot Cups for Bear Polar trucks. Made from 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Riptide Pivot Cups for Carver C7.3/C2.4 trucks. Made of urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Complete kit of bushings, pivot cups, and washers for optimal adjustment of Evolve, Vestar Blackhawk, Flipsky 12" &amp; 15.2" electric skateboard trucks. This box has been developed after numerous tests, and mixes different shapes and hardnesses of cushions for a perfect balance between maneuverability and stability. The Krank formula, allows you to refine the adjustment by playing on the tightening.</p>