<p>This is a replacement protective front bumper for your Bont Quadstar or Prostar quad skates. Use a hair dryer to make the rubber warm and use super glue to attach it to the boot. The protective bumper comes as a set of two bumpers (left and right).</p>

<h2>Delrin Pivot cups for Bont Athena &amp; Infinity roller skate plates. <strong>Set of 2 cups(for one plate)</strong></h2>

<p>Radar Mini Wheel Bag. Fit 8 roller skate wheels + tool or bearings set. Easy access to the wheels.</p>

<p>Kit for making Discoblox fit onto plates with tapered kingpins such as Powerdyne Reactor, Revenge and Rival.  Kit comes with 4 washers and 4 trimmed cushions in either 88a or 93a.</p>

<p>Pivot Cups for Powerdyne Revenge and Rival Plates. <strong>Sold in pairs(for one plate)</strong></p>

<p>Replacement standard PVC pivot cups for Suregrip Robe &amp; Probe plates(the one who comes has standard on most Sure-Grip rollerskates). Size: Ouside diameter 14mm; Inside diameter 8mm; heights 17mm. <strong>Set of 2 cups(for one plate)</strong></p>

<p>This strap with a Powerdisc will lock your heel perfectly into any skate.Just put it around the heel and turn the knob until fully locked. The strap will improve the control, power transfer and support of your boots. One size fits All. Set of 2 powerstraps</p>

<p>This is a replacement protective front bumper for your Bont Hybrid quad skates. Use a hair dryer to make the rubber warm and use super glue to attach it to the boot. The protective bumper comes as a set of two bumpers (left and right). </p>

<p><span>Bionic Barefoot Booties can be worn with quad, inline, ice boots and/or cycling shoes as an alternative to socks, enhencing confort and boot feeling.</span></p>

<p>The MYFIT Powerarch 45 strap is made for Inline skates and roller skates which do not provide enough heel lock. Simply place the velcro strap around your boot and tighten the strap to the desired tightness in order to lock your foot down. Set of 2</p>

<p>Ball Stud Pivot Cups for Pilot plates all models: F16 Falcan &amp; Falcon Plus, F16 Eagle &amp; Eagle Plus. <strong>Sold in pairs(for one plate)</strong></p>

<p>This Gel heel cushions will take away any shocks from your feet and legs. Your joints, ligaments, and bones will thank you. Sizes: Small 36-40; Medium 40-43; Large 43-47.</p>

<p>Unlike single strap toe covers that sometimes slide from side to side, these Riedell toe caps have been designed to stay securely in place, protecting your boot under the most demanding use on any surface. Built from a rugged, one-piece construction and finished with actual eyelets that won't damage laces even when pulled very tight Provide the very best protection for your skate boot. <strong>Set of 2</strong></p>

<p>Rookie Skate Holder Carry Strap. A must have accessory for carrying your skates. Made to fit all skate sizes and styles. Loops around a wheel or toe stop; Strong nylon webbing; Folds away to fit in your pocket; 140cm length</p>

<p>MYFIT Derby Techsole – upgrade your game. The MYFIT Derby Techsole has been designed for Roller Derby skates, but also Park Roller skates. The thin sole out of 3-D molded EVA material combines support and performance.</p>

<p>Keep your skates looking new with the leather Riedell Toe Guards. Thread the top of the toe guard with your laces around the bottom eyelets of your boot and loop the bottom through the toe stop bolt to prevent the front of your boot from getting scuffed up. <strong>Sold in pairs</strong></p>

<p>The Roller Derby 3.0 Kneepad features sewn PE caps and TSG unique double velcro closure straps. The double velcro closure on the top strap guarantees a secure fitand hold while eliminating snagging on players' clothing. A customisable bottom strap with concealed, quick-release buckle and open back butterfy then deliver perfect fit and size management.</p>

<p>The S1 Lifer is one of the best fitting and safest helmets for skateboarding, BMX, and Roller Derby. It uses a special formulated EPS fusion foam wich allows it to protect the head from multiple low force impacts as well as high impacts. Color: Navy Matte</p>

<p>TSG Force III kneepads are a longtime favorite vert knee pads, designed by pro skate riders. The ergonomic pre-shaped design with an extra strong multi-layered foam and a replaceable cap provide superior protection when hitting the vert.</p>

<p>This Gel heel cushions will take away any shocks from your feet and legs. Your joints, ligaments, and bones will thank you. Sizes: Small 36-40; Medium 40-43; Large 43-47.</p>

<p>The S1 Lifer is one of the best fitting and safest helmets for skateboarding, BMX, and Roller Derby. It uses a special formulated EPS fusion foam wich allows it to protect the head from multiple low force impacts as well as high impacts. Color: Black matte</p>

<p>Love Poison grip but want more roll?... Say hello to Atom Poison Savan 59mmx38mmt! What could possibly make Atom's Poison, one of the top performing wheels in the industry, any better?... Our exciting NEW SAVANT core of course! <strong>Set of four wheels</strong></p>

<p>Replace your S1 Lifer Helmet Sizing Liners with some fresh ones! The S1 Lifer Helmet Sizing Liners are replacement front and back pads for the S1 Lifer helmets.  These Liners are compatible with all Lifer Helmet Shells including our standard Lifer, Mini Lifer and Mega Lifer.</p>