Yow Abec-7 Built-in Skateboard Bearings (8 Pk)

<p>Carver C7 Replacement Thrust Bearing Set. Set includes: One 3/8" ID x 15/16" OD Top Thrust Bearing; Two 3/8" ID x 15/16" OD Top Thrust Washers; One 3/8" ID x 7/8" OD Top Washer; One 7/8" ID x 1 3/8" OD Bottom Thrust Bearing; Two 7/8" ID x 1 3/8" OD Bottom Thrust Washers; One 3/8-24 TPI x 1 ½" Long Pivot Bolt; One 3/8-24 TPI Nylock Nut</p>

<p>10mm X 10mm bearing spacers <span style="color:#ff0000;">Only fits to 10mm axles trucks such as Surf Rodz 10mm, Bear Smokey, Magun </span>Match with most longboard wheels. Set of four</p>

<p>Enuff Swiss style bearings are made using high polished chrome balls and use Militec-1 Ultra Low Friction Oil as used by the US Army. <strong>Set of height bearings</strong></p>

<p>Mini Logo™ precision bearings are Skate Rated to Skate One specifications. They feature removable shields on both sides, high-speed molded ball retainers, and precision-ground, super-finished hardened chromium steel races and balls. For high performance out of the box, they're pre-lubricated with Bones Speed Cream. Pack of 8 bearings(for 4 wheels) Made for standard 8mm axles trucks</p>

<p>Bear Space Balls Abec-7 steel balls. Made for standard 8mm axles. Built in spacers and washers to keep wheels aligned without the complication of extra components. Buit in spacers perfect interface witn the axle, combined with non-contact labyrinth seals that keep dirt out while minimizing drag. Set of 8 bearings</p>

<p>Bones Reds are one of the world most populare skateboard bearing. The Bones Race version feature built in spacers. So no more need to use speed rings or separate spacers. <strong></strong>Each Bones Race REDS Bearing is made with upgraded top quality bearing steel, ground to perfection and polished, best for racers who use precision trucks and properly tighten their axle nuts. <strong>Set of height bearings.</strong></p> <p></p>

<p>Abec 7 Skateboard &amp; Roller skate bearings type 608. Fit on most wheels and trucks. Steel balls and nylon shields on both sides. The highest quality that you can get for this value. Set of 8 Bearings(for 4 wheels)</p>

<p><span style="font-size:medium;font-family:arial, helvetica, sans-serif;">Riptide Speed Dry Bearing Lube. Very low-viscosity lube that is barely affected by temperature. In addition to the multiple types of oil in the blend and the ratio of each in Wet and Dry, a submicron dry lubricant that has a far lower coefficient of friction (COF) than Teflon has been added.  This allows the bearings to stay at peek efficiency longer. 1 Oz(30ml)<br /></span></p>

<p>The 72mm Kevin Reimer wheel from Powell-Peralta is an all-around DH performer. Poured in SSF( 75A Purple, 80A Yellow) and SSF PRO(Green) Formula. This is a downhill race wheel with the skin on, and then can serve you as a fast freeride wheel afterwards - Truly the best of both worlds. This is the new version that comes with the black H5 fibre infused core, and a new "inset" lip that will let the wheel grip more, and wear better. The Purple is less grippy than the Green. The yellow SSF have a more "on top of the pavement feel, is more durable, and a more firm catch when you come back into traction with lots of slide in the middle. <strong>Set of 4 Wheels</strong></p>

<p>Cinetic Crop 66mm wheels. Mid size high traction wheels for cruising, carving, and pumping. Size 66mmx50mm with a 49mm contact patch. <strong>Set of 4 wheels</strong></p>

<p>Yow Ura 66mm surfskate and longboard carving cruising wheels. High traction and rebound for easy pumping. Square lip, 51mm contact patch, off-set core placement. This is the same wheels who factory comes with Yow surfskates. The Ura is also a good wheel for riding pumptracks on a longboard. Made in Spain. <strong>Set of 4 wheels</strong></p>

<p>Orangatang Fat Free is a fun little wheel for cruising and mild freeriding</p> <p></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/mzsyA5q0HF0" frameborder="0"></iframe></p>

<p>Bones Bearings tool acts as both a bearing press and a puller as well. It works with 8mm bearing and for the 90% of people not using spacers in their wheels. It is designed to press the bearings putting only force on the inner race so you wont dent your shields. Ball detent technology and small enough to fit in your pocket and make it your keychain.</p>

<p>Bones Hardcore™ Bushings are barrel bushings which will fit in ALL longboard trucks that use standard height bushings such as Aera, Caliber, Paris, Randal, PNL, etc. The insert greatly increases the precision of your truck by limiting side to side movement of the hanger, increasing rebound, stability, and steering. <strong>Set of 2 bushings(for one truck)</strong></p>

<p style="margin-bottom:0cm;">Set of eight skateboard mounting Bolts and nuts. Phillips Flathead. Sizes: 1"= 2,54cm; 1 1/8"= 2,85cm ; 1.1/4"=3,17cm ; 1.1/2"=3,81cm ; 2"=5,08cm</p>

<p>Riptide Slab foot stop developed jointly with Ambroise Trauet (record holder for the fastest toeside stand up slide in the world with 117.35Km/h). Polyurethane stopper delivered with 3 delrin raising discs, which allows the foot stop to be placed either fixedly directly in contact with the board, or pivoting raised by 3, 4, 5, 7, 8, 9, or 12mm. Helps keep the foot in place while remaining mobile. A must have when tackling committed downhill or freeride.</p>