Venom Eliminators SHR V1 Longboard bushings

<p>Set of 4 barrels bushings poured out of the same urethane as the Orangatang wheels</p>

<p>Riptide Chubby APS step barrel bushings. The hallmark of this shape is its stability - provides an extremely stable platform boardside. Progressive resistance to lean but still very supple. Works well with restrictive, as well as non-restrictive, bushings seats. Supplied with stainless steel fender washers. <strong>Set of 2</strong></p>

<p>RipTide Cones are a classic shape for carving and slalom. It ensure a maximum turnability and rebound. <strong>Set of two (For one truck)</strong></p>

<p>Riptide Street Cones APS Bushings. Sized to fit properly in conventional "Indy-style" trucks(Independent, Venture, Thunder, Iron, Tensor,...). Custom APS Urethane Formula for ultra-performance and sweet rebound. 975" Diameter x .5" High (24.77mm Dia x 12.7mm High). We recommend using those Street bushings board side, matching with Street Short Bushings road side. The Cone's shape is turnier and will let you turn deeper. Sold as a pair of 2 bushings with washer cup</p>

<p>Set of two high quality urethane Sabre Barrel bushings(For one truck)</p>

<p>The Magnum bushings are an adaptation to Riptides Chubby Bushing sized specifically for the seat of Paris® Trucks.</p> <p>Set of 2 bushings (for one truck)</p>

<p>Set of 2 High Rebound Venom Super Carve conical bushings, made for carving in mind</p>

<p>Riptide Street Barrels/ Cones bushings combo speciflicly deisigned to fit Penny cruiser's trucks. APS Formula. Those bushings are a real upgrade for your cruiser's trucks. The high quality urethane range from 75A(softer) to 90A(Medium). Barrel/ Cone combo is a good mix between stabily and agility. Heights: Barrel 0.55" / Cone 0.5". <strong>Set of 4 cushions.</strong></p>

<p>Venom SHR Ronin specific. Made out of Ultra High Rebound Formula, those Venom bushings are a great update to any models of Ronin Trucks. Tall barrels shape. <strong>Set of two bushings (For one truck)</strong></p>

<p>Venom Tall Keg HPF shape is designed to give more progressive resistance and rebound than a barrel, but without the hard stop of a normal stepped bushing. Ideal for use on the board-side, especially if you want to go to a softer setup without losing stability. Just think of it as a barrel, but with that thicky-thicc-thicc as Nelly would say. <strong>Set of two</strong></p>

<p>Juicer Bounce, Tighter package. Crafted for quick turning response and smooth edge-to-edge transitions, the Orangatang Knuckles are the ultimate high-energy bushing upgrade for carving, pumping, dancing, and freestyle longboarding. Available in two duros: soft (35-85Kg) and medium (70-105Kg). Each pack contains two insert barrel bushings, two gumdrop bushings, two large cup washers, and two small cup washers.</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/LjmM-NTEBMY" frameborder="0"></iframe></p>

<p>Bones Hardcore™ Bushings are barrel bushings which will fit in ALL longboard trucks that use standard height bushings such as Aera, Caliber, Paris, Randal, PNL, etc. The insert greatly increases the precision of your truck by limiting side to side movement of the hanger, increasing rebound, stability, and steering. <strong>Set of 2 bushings(for one truck)</strong></p>

<p>Venom (Aka Zak Maytum Skate Products) Downhill Barrels SHR longboard skate bushings. Standard height compatible with most longboard trucks (Paris, Caliber, Bear Grizzly Gen 6, Atlas,...). The cylindrical shape offers maximum stability and is the most popular in DH and Freeride. The SHR (Super High Rebound) formula allows the bushing to return to its original shape even more quickly. Thanks to this formula, the truck still turns as much, but gains in stability. Sold in pairs (2 Cushions)</p>