Designed specifically for use in Paris® Trucks, the Magnum bushings fit the bushing seat perfectly, thus eliminating all "slop" and allowing them to perform at their highest level! The magnum bushings are an adaptation to Riptides Chubby Bushing sized specifically for the seat of Paris Trucks.
WFB™ (World's Fastest Bushings) Internally lubricated for smooth, fast, low-friction transitions in any competitive discipline.
Riptide bushings ride a couple of points softer than they test and they increase your turning range, so order accordingly!
NOTE: Whenever switching to new bushings ALWAYS check for wheelbite before you ride!
For further information on the nature of the review controls, as well as the possibility of contacting the author of the review please consult our CGU.
No inducements have been provided for these reviews
Reviews are published and kept for a period of five years
Reviews can not be modified: If a customer wishes to modify their review then they can do so by contacting Verified Reviews directly to remove the existing review and publish an amended one
The reasons for deletion of reviews are available here.
Based on 2 customer reviews
Sort reviews by :
published the 06/03/2017following an order made on 06/03/2017
"Envoi rapide et économique (format lettre). Les magnum sont complètement adaptés aux Paris. Plus de wheel bite possible, tout en conservant une capacité à tourner hyper agréable (WFB). Avec un barrel roadside, un gain en stabilité également à des vitesses plus rapides en descente. Vraiment content de mon achat et un réel avantage par rapport aux barrel riptide que je connaissais déjà."
published the 06/10/2015following an order made on 06/10/2015
"Le Magnum côté planche apporte plus de stabilité au truck Paris et un virage plus progressif, sans flottement. Une sacrée upgrade du truck ! Petit bémol, les rondelles extra larges fournies avec sont trop grandes à mon goût, beaucoup plus larges que les bushings."
<p><strong></strong>Barrel shape, the most stable shape of bushings commonly used for downhill and freeriding.</p>
<p><strong>The tall barrel are specialy made to fit on Ronin trucks (Both models)</strong></p>
<p>Set of two bushings (for one truck)</p>
<p>Riptide Krank Canon bushings. Barrel shape with specific size for perfect fit on Paris V2 Trucks. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! Set of 2 bushings(for one truck)</p>
<p>Carver Spare Parts: Replacement bushings & pivot cups for Carver C7/C2 Trucks. This is the exact same cushions as the on who set the original trucks. Front Truck(C7) 95A Barrel/cone; Rear Truck(C2) 89A Barrel/Cone</p>
<p>Riptide Street Barrels/ Short Street Cone combo in APS Formula. Those bushings are a real upgrade for your skateboard trucks. The high quality urethane range from 60A(extremly soft) to 97.5A(Hard), so no matter if you are a yound kid or a fat old guy, you will get the duro that you need. Barrel/ Cone combo is a good mix between stabily and agility. Fit most " indy style" conventional trucks(Indepedendent, Venture, Tensor, Iron, Thunder,...) <strong>Set of 4 cushions with cup washers.</strong></p>
<p>Carver CX/C2 bushing set "Loose Shape". This set is made of 2 pivot cups, 2 CX/C2 89A Top Cones, 2 CX/C2 89A Bottoms cones, 1 Washer cup. The loose shape will let you to turn even deeper with you Carver CX surfskate.</p>
<p>Bones Hardcore™ Bushings are barrel bushings which will fit in ALL longboard trucks that use standard height bushings such as Aera, Caliber, Paris, Randal, PNL, etc. The insert greatly increases the precision of your truck by limiting side to side movement of the hanger, increasing rebound, stability, and steering. <strong>Set of 2 bushings(for one truck)</strong></p>
<p>RipTide Tall Fat Cones has the circumference of a barrel where the bushings sit on the truck, and then gradually widens to the size of a chubby where the washers sit. This gives you the ability to get more lean than a chubby, while giving you progressive resistance the more you turn. APS Urethane. Tall bushings are specificly made for Ronin, Rogue, Bear Kodiak trucks. <strong>Set of two bushings</strong></p>
<p>RipTide Cubes Bushings, specialy made for specific square bushings sits Rey Trucks, allow you to change the feel of your ride simply by altering the orientation of the bushing in the bushing seat! <strong>Set of two bushings</strong></p>
<p>The PSD foot stops are made out of extra hard urethane by the renown bushings company RipTide. The foot stop helps you keeping your front foot in locked place while sliding or cornering. In and out shape gives you various placement options to dial with your riding style. Sold as one foot stop including a long bolt</p>
<p>Skateboard Truck Independent 144mm Forged Hollow Stage 11 Silver. Forged baseplate for stronger impact resistance. Hollow axle and kingpin makes this truck lighter for higher ollies. Recommended for deck width 8.25". <strong>Sold as a single truck</strong><strong></strong></p>
<p>Independent Standard Cylinder Bushings.<strong> </strong><span style="font-family:Arial, Helvetica, sans-serif;font-size:12px;line-height:normal;">Made with an Exclusive High-Rebound Formula that improves grind clearance and adjustability when used with the included washers. <span>Properly sized to fit Independent trucks</span>(also fit most skateboard trucks: Venture, Iron, Destructo, Thunder,...) Includ 4 Bushings(For 2 Trucks).</span></p>