5/8" Stopper Washers Set

<p>Mounting Hardware set for Roller Skates. Must be use with hard sole shoes such as Roller Derby and Artistic boots. Include bolts 12 bolts(8x3.5m + 4x6.9cm) with washers and nuts.</p>

<p>Mounting Hardware set for Roller Skates. Must be use with hard sole shoes such as Roller Derby and Artistic boots. Include 12 phillips head bolts(8x3.5m + 4x6.9cm) with washers and nuts.</p>

<p>Set of 4 replacement axles nuts &amp; 8 Speed rings for standard 8mm axles</p>

<p>Roll Line Ajustement Kingpin nuts for Variant, Blaster, &amp; Killer plates. Set of two(for one plate)</p>

<p>Suregrip Zero Nuts are the lightest after market axle nuts and are made for standard 8mm(1/2") axels. Zero Nuts are adding a colorful touch to your roller skates. They will also helps the long lasting of your bearings by protecting them from the dust. <strong>Pack of 8 Nuts</strong></p>

<p>This Pilot toe stop screws will allow you to keep your stoppers in place on Pilot Falcon plates. <strong>Set of two srews</strong></p>

<p>Bushings cup washers. Set of two</p>

<p><span>Washers used on the pivot pin to help secure the pin from moving in and out. This is a necessary part when using a truck with an adjustable pivot pin such as Sure-Grip Avenger, Avanti Magnesium,... 4Pk</span></p>

<p>Roll Line Bearing Spacers 7x9mm(4 Pk). Diameter 7mm, width 9mm. Those spacers are not standard and are <strong>specifics to Roll Line Wheels</strong> <strong>and 7mm axles</strong>. Set of 4 spacers(for 4 wheels)</p>

<p style="margin-bottom:0cm;">Specially designed for today's composite hockey sticks, Pro-Blade Cloth Tape from Renfrew Pro incorporates an advanced adhesive formulation applied to a polyester/cotton cloth base, resulting in a more substantial cloth tape with increased wear characteristics.24mm x 25m Roll</p>

<p>5/8" Stopper Nuts &amp; Washers Set. For locking your 5/8" adjustable stopper to your skate plate. Can be use one Powerdyne Thrust/Triton/Dynapro plates, and Sure Grip plates. Not compatible with plates using bell stopppers or the ones that required Allen key to tighten stoppers. <strong>Set of 2 nuts and 2 washers(For both plates)</strong></p>

<p>The S1 Lifer is one of the best fitting and safest helmets for skateboarding, BMX, and Roller Derby. It uses a special formulated EPS fusion foam wich allows it to protect the head from multiple low force impacts as well as high impacts. Color: Checkerboard White</p>

<p>Gumball Toe Stops is the number one roller derby stopper. Made with all natural rubber and an aluminium stem(to reduce weight), Gumball toe stops have the perfect balance of grip and durability necessary for quick stops and fast starts. Diameter 46mm. 2 stem sizes: short=17mm; Long=30mm. Available in 75A(More grip) or 83A(Better wear properties for outdoor and park skaters)<strong>. Sold as a set</strong></p> <p></p>

<p>The Roller Derby 3.0 Kneepad features sewn PE caps and TSG unique double velcro closure straps. The double velcro closure on the top strap guarantees a secure fitand hold while eliminating snagging on players' clothing. A customisable bottom strap with concealed, quick-release buckle and open back butterfy then deliver perfect fit and size management.</p>

<p>Skateboard T- Tool. All in one tool to tune your skateboard. 9/16 inch kingpin socket; 1/2 inch axle nut socket; 3/8 inch hardware socket; Phillips screwdriver; Allen wrench</p>

<p>Roll Line Artistic 5/8" Metric(Eu) Thread stoppers. High rebound toe stops. The round shape is great for turning around the stopper and is popular for artistic use or/and Roller Derby Jamming<span style="color:#d0121a;"><strong> Only fit European plates(Roll Line)</strong></span>. <strong>Sold as a set of two</strong></p> <p><strong></strong></p>