Riptide Tall Cones APS Longboard Bushings (For one truck)

<p>Spare spring for slide surfskate wave truck Gen 3.0</p>

<p>To keep the best feeling with your YOW Surfskate, we recommend to regulary change your Yow Spring. <strong>Pack of 2 springs, <span style="color:#d0121a;">ONLY FITS YOW V3 SYSTEM. Spring size must be the same as the one from the purchased system. 4mm=Soft; 5mm=Hard</span></strong></p>

<p>RipTide Cubes Bushings, specialy made for specific square bushings sits Rey Trucks, allow you to change the feel of your ride simply by altering the orientation of the bushing in the bushing seat! <strong>Set of two bushings</strong></p>

<p>The magnum bushings are an adaptation to Riptides Chubby Bushing sized specifically for the seat of Paris Trucks.</p> <p>Set of two bushings (For one truck)</p>

<p>Bones Hardcore™ Bushings are barrel bushings which will fit in ALL longboard trucks that use standard height bushings such as Aera, Caliber, Paris, Randal, PNL, etc. The insert greatly increases the precision of your truck by limiting side to side movement of the hanger, increasing rebound, stability, and steering. <strong>Set of 2 bushings(for one truck)</strong></p>

<p>Set of four Bones busings. Color black. Feet most street skateboards trucks. Bones bushings meet the highest standings required, and are the choice of many pro skateboarders</p>

<p>RiotPlugs mimic spherical bearings in that they reduce translation of your hanger through a turn</p> <p style="margin-bottom:0cm;">Fits on Gunmetal V2 Trucks</p> <p style="margin-bottom:0cm;">Set of two</p>

<p>Bushings specific format for old school trucks of the Independent brand, series stage 1 to 7. The original cushions have been specially reissued on the occasion of the re-launch of Independent Stage 4 trucks. Enjoy a vintage format combined with a modern rubber formula. Contains 2 barrel bushings (height 15mm), 2 cones (height 13mm), and 4 metal washers. Choose from 3 hardness levels: 90A (Soft), 92A (Medium), 94A (Hard).</p>

<p>Set of two Angled riser Pads. 5° Wedge. 9,5mm to 14mm depth. 8 Holes. Soft duro</p>

<p><span style="font-family:Arial;font-size:12pt;">RipTide Pivot cups &amp;Tubes are the result of two years of beta testing . RipTide's Ronin Pivots are specifically designed for Ronin trucks (Cast &amp; Precision). RipTide's exclusive internally lubricated WFB Urethane in 96a offer smouth turning while the Tube offers lower friction due to the reduced surface contact with the nose of the hanger.</span> Sol as a pair</p>

<p>The Barrels are a classic shape for Downhill and freeriding. It ensure a maximum of stability at high speed.</p> <p>Set of two (For one truck)</p>

<p>RipTide Cones are a classic shape for carving and slalom. It ensure a maximum turnability and rebound. <strong>Set of two (For one truck)</strong></p>

<p>RipTide Tall Fat Cones has the circumference of a barrel where the bushings sit on the truck, and then gradually widens to the size of a chubby where the washers sit. This gives you the ability to get more lean than a chubby, while giving you progressive resistance the more you turn. APS Urethane. Tall bushings are specificly made for Ronin, Rogue, Bear Kodiak trucks. <strong>Set of two bushings</strong></p>

<p>Standard replacement nut to fit on kingpins</p> <p>Sold per piece</p>

<p><span>Riptide Fat Cones have the same initial stability as a Barrel but as you lean, they offer progressively higher resistance the further you go.  <span>The Barrel / FatCone setup</span><span> is for those looking for higher stability at higher speeds but still highly maneuverable for slides, high speed carving and downhill applications.  This setup is ideal when you need to restrict the ends of the lean to prevent wheelbite or if you just like a more progressive feel to your setup. Krank Formula. Set of 2 bushings with washers</span></span></p>

<p>Tall Cones bushings would fitspecifics trucks such as Ronin, Rogue, Arsenal, Bear Kodiak,... The cone shape would let you turn deeper and works great for carving. Riptide highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the kingpin nut!. <strong>Set of two bushings (For one single truck)</strong></p>