Carver CX Standard Shape Bushings Set

<p>More stable than a barrel and less restrictive than an Eliminator, the Venom Freeride SHR bushing has a wide, stepped design that can be flipped for different turning response. <strong>Set of two bushings (For one truck)</strong></p>

<p>Riptide Short Street Barrels bushings. Fit most TKP  street &amp; cruisers Trucks. Use the short Street barrel road side, in addition with a <a href="https://fulkit-skateboards.com/en/bushings/4330-55726-riptide-street-barrels-aps-skateboard-bushings.html">street barrel</a> or <a href="https://fulkit-skateboards.com/en/bushings/377-558-riptide-street-chubby-aps.html">street chubby</a> board side. Barrels maximize the stabily and reduce the truck's lean. APS Formula with a large choice of durometers ranging from 60A(Very soft) to 97.5A(Very Hard). <strong>Set of 2 bushings with flat washers</strong></p>

<p>Spare spring for slide surfskate wave truck Gen 2.0</p>

<p>Bones Hardcore™ Bushings are barrel bushings which will fit in ALL longboard trucks that use standard height bushings such as Aera, Caliber, Paris, Randal, PNL, etc. The insert greatly increases the precision of your truck by limiting side to side movement of the hanger, increasing rebound, stability, and steering. <strong>Set of 2 bushings(for one truck)</strong></p>

<p>Spare bushings for Slide Surfskates rear truck. Same size and durometer as the original cushions factory set on Slide Surfskates rear trucks. 1  tall barrel cushion to set board side, and 1 standard cone shape bushing to set road side.</p>

<p>RipTide Cones are a classic shape for carving and slalom. It ensure a maximum turnability and rebound. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! Set of 2 bushings(for one truck)</p>

<p>Tall Cones bushings would fitspecifics trucks such as Ronin, Rogue, Arsenal, Bear Kodiak,... The cone shape would let you turn deeper and works great for carving. Riptide highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the kingpin nut!. <strong>Set of two bushings (For one single truck)</strong></p>

<p>RipTide Tall Fat Cones has the circumference of a barrel where the bushings sit on the truck, and then gradually widens to the size of a chubby where the washers sit. This gives you the ability to get more lean than a chubby, while giving you progressive resistance the more you turn. APS Urethane. Tall bushings are specificly made for Ronin, Rogue, Bear Kodiak trucks. <strong>Set of two bushings</strong></p>

<p>Carver CX/C2 bushing set "Firm Shape". This set is made of 2 pivot cups, 2 CX/C2 89A Top Cones, 2 CX/C2 89A Bottoms Barrels, 1 Flat Washer. This setting brings more stability.</p>

<p>Yow skateboard riser pad 1". sold individualy</p>