Deutsch
Español
Français
There are no more items in your cart
Pantheon Chase Hiller 36.25" Longboard Complete
€389.25
€369.95
Tax included
Pack description
Complete longboard Phanteon Pro Chase Hiller. This Pantheon goes against the shapes currently encountered in downhill competitions. Size 36.25" by 9.4" wide with a 22.75" spacing between the trucks. Profile with mini drop of 3/8" and passages of wheels molded leaving free rein to the use of wide wheels, even mounted on narrow trucks. The "mustache" rocker presents a pocket for each foot. On the back, the dome of the W concave joins the one created by the double rocker and forms a very appreciable flat area for those who push mongo (back foot). A kicktail crowns it all. Board equipped with trucks Bear Grizzly Gen6 155mm 50°/40°, Bearings Nut Steel Balls with integrated spacers, and fast freeride wheels La Paulade Polymer 76mm.
Pack Informations
Complete longboard Phanteon Pro Chase Hiller. This Pantheon goes against the shapes currently encountered in downhill competitions. Size 36.25" by 9.4" wide with a 22.75" spacing between the trucks. Profile with mini drop of 3/8" and passages of wheels molded leaving free rein to the use of wide wheels, even mounted on narrow trucks. The "mustache" rocker presents a pocket for each foot. On the back, the dome of the W concave joins the one created by the double rocker and forms a very appreciable flat area for those who push mongo (back foot). A kicktail crowns it all. Board equipped with trucks Bear Grizzly Gen6 155mm 50°/40°, Bearings Nut Steel Balls with integrated spacers, and fast freeride wheels La Paulade Polymer 76mm.
Pack content
DH champion Chase Hiller pro model deck. This Pantheon runs counter to the shapes currently encountered in downhill races. Size 36.25" for 9.4" wide with a wheelbase of 22.75". Profile with a 3/8" mini drop and flared wheel wells so you can use wide wheels, even mounted on narrow trucks. The mustache rocker has a pocket for each foot. On the back, the dome of the W concave joins the one created by the double rocker and forms a flat zone very appreciable for those who push mongo (back foot). The whole rear end swoops up into a kicktail. Grip tape included
Data sheet
- Width
- 9.4"
- Wheelbase
- 22.75"
- Grip tape
- Included
- Disciplines
- Downhill, Freeride
- Kicks
- Single Kick
- Mounting of Trucks
- Top mount
- Lenght
- 36.25"
Redesigned from the ground up and incorporating technology perfected in the high end DH and Freeride trucks, Gen 6 Grizzlies are the best performing cast trucks on the market today. Game changing strength and highly refined steering geometry are just the tip of the iceberg, Gen 6 Grizzlies 50° 155mm are all around trucks for Dancing, Carving, Freeride, Pumptrack, LDP,.. They would fit best on narrow decks. 155mm are more turny to compare with 180mm trucks. Hollow Kingpin. Set with 85A Step Barrel / Cone Bushings. Sold as a single truck
Data sheet
- Width
- 155mm(6.1")
- Construction
- Hollow Kingpin, Cast Aluminium
- Disciplines
- Pumptrack, LDP, Downhill, Freeride, Dancing, Carving, Cruising
- Kingpin Angle
- 50°
- Geometry
- Inverted
- Trucks Axles Diameter
- 8mm(Standard)
Redesigned from the ground up and incorporating technology perfected in the high end DH and Freeride trucks, Gen 6 Grizzlies are the best performing cast trucks on the market today. Game changing strength and highly refined steering geometry are just the tip of the iceberg, Gen 6 Grizzlies 40° 155mm are Downhill/Freeride oriented. They would fit best on narrow decks. 155mm are more turny to compare with 180mm trucks, will the 40° Baseplate would add some extra stability. Hollow Kingpin. Set with 90A Step Barrel / Cone Bushings. Sold as a single truck
Data sheet
- Width
- 155mm(6.1")
- Construction
- Cast Aluminium, Hollow Kingpin
- Weight
- 417Grs
- Disciplines
- Freeride, Downhill
- Kingpin Angle
- 40°
- Geometry
- Inverted
- Trucks Axles Diameter
- 8mm(Standard)
Semi-flexible flat riser pads. Riser pads to raise the ground clearance of the skateboard to prevent wheelbite and isolate the deck from trucks to reduce vibration. 6-hole pads, compatible with New School and Old School drillins patterns. Available in 1/8" (3mm), 1/4" (6mm), 3/8" (9mm), & 1/2" (12mm). Sold in pairs
What screw size should I use?
Pads 1/8": 1" to 1.125" screws
Pads 1/4": 1.125" to 1.25" screws
Pads 3/8" and 1/2": 1.5" screws
Data sheet
- Truck Hole Pattern
- Short 4 - 2.125" (New School), Length: 4 -2.5" (Old School)
The Nut Classic Steel Balls Built-In bearings with integrated spacers and speed rings are specifically designed for longboarding. Their precise manufacturing ensures a perfect fit in the wheels and along the axles, providing optimal alignment and a smooth ride. Equipped with 7 steel balls lubricated with low-viscosity oil and a finish of quality equivalent to or higher than Abec-9, the Nut Steel Balls Built-In deliver exceptional speed performance, making them ideal for downhill, pump track, LDP, as well as cruising and dancing. Thanks to their two removable rubber shields, the bearings stay cleaner for longer. This set includes 8 bearings, compatible with most skateboard and longboard wheels (not compatible with roller skates).
Data sheet
- Trucks Axles Diameter
- 8mm(Standard)
- Balls material
- Steel
- Built-In Spacers?
- With Built-In Spacers
Data sheet
- Width
- 65mm, 65mm
- Contact Patch
- 65mm, 65mm
- Core Placement
- Center-set
- Lip profile
- Square Lip
- Wheel surface
- Smooth
- Diameter
- 76mm
- Durometer(s)
- 76A
- Disciplines
- Fast Freeride, Downhill
- Gap width between bearing seats
- 10mm(Skateboard/Longboard standard)
- Grip level
- 5/5