Deutsch
Español
Français
There are no more items in your cart
Rocket LAF Don 29.5" Longboard Complete
€518.85
€489.95
Tax included
Pack description
Rocket Don 29.5" x 8.4" is a freeride & DH longboard that is both simple and conceptual. This redesigned and supercharged LAF (Light As F###) version is lighter and stiffer than the standard model, and features a slightly longer length and wheelbase (18" -21"). Poplar core with carbon veneer and polyurethane outline (protects from shocks). With a length of 75cm, the deck developed by Benson Marquart is compact and is suitable for setups with narrow trucks. The feet naturally position themselves just above the trucks for maximum control. At the front, the flush mount neutralizes the impact of the rocker on the angle of the truck. Deep elliptical concave 7 to 10mm, and W concave on the back. Everything is dialed to allow you to move your feet without discomfort, while keeping good points of reference and support. Drillings to accommodate a weight (gravity plate) and a swiveling foot stop. Complete skateboard equipped with Jessup Roam extra rought griptape, Bear Grizzly Gen6 130mm 50°/30° Trucks, Nut Steel Balls Bearings with integrated spacers, & La Paulade Polymer 76mm 76A Wheels.
Pack Informations
Rocket Don 29.5" x 8.4" is a freeride & DH longboard that is both simple and conceptual. This redesigned and supercharged LAF (Light As F###) version is lighter and stiffer than the standard model, and features a slightly longer length and wheelbase (18" -21"). Poplar core with carbon veneer and polyurethane outline (protects from shocks). With a length of 75cm, the deck developed by Benson Marquart is compact and is suitable for setups with narrow trucks. The feet naturally position themselves just above the trucks for maximum control. At the front, the flush mount neutralizes the impact of the rocker on the angle of the truck. Deep elliptical concave 7 to 10mm, and W concave on the back. Everything is dialed to allow you to move your feet without discomfort, while keeping good points of reference and support. Drillings to accommodate a weight (gravity plate) and a swiveling foot stop. Complete skateboard equipped with Jessup Roam extra rought griptape, Bear Grizzly Gen6 130mm 50°/30° Trucks, Nut Steel Balls Bearings with integrated spacers, & La Paulade Polymer 76mm 76A Wheels.
Pack content
The Rocket Don 29.5" x 8.4" is freeride & DH skateboard deck witch is both simple and conceptual. This redesigned and boosted LAF (Light As F###) is lighter and stiffer than the standard model, and features a slightly longer length and wheelbase (18" -21"). Poplar core with carbon veneer and polyurethane contour (protects from shocks). With a length of 75cm, this deck developed by Benson Marquart is compact and is suitable for assemblies with narrow trucks. The feet are naturally positioned just above the trucks for maximum control. On the front, the flush mount neutralizes the impact of the rocket on the angle of the truck. Deep elliptical concave 7 to 10mm, and W concave on the back. Everything is dosed to allow you to move your feet without discomfort, while keeping good points of reference and supports. Drillings to accommodate a ballast (gravity plate) and a pivoting foot stop. Grip not included
Data sheet
- Width
- 8.4"
- Construction
- Maple, Fiberglass, Poplar, Caron
- Wheelbase
- 18", 21"
- Grip tape
- Not Included
- Disciplines
- Downhill, Freeride
- Kicks
- No Kick
- Mounting of Trucks
- Top mount
- Lenght
- 29.5"
Jessup Roam Rough griptape for longboards. 10" width. Sold per 10cm sections with a minimum of 100cm. Jessup is a skateboard griptape leader for years. Grip is fexy, grippy, and easy to instal. When buying deck and griptape in the same time, we can stick the grip on the deck for you and for free. Just ask us on your order comment.
Semi-flexible flat riser pads. Riser pads to raise the ground clearance of the skateboard to prevent wheelbite and isolate the deck from trucks to reduce vibration. 6-hole pads, compatible with New School and Old School drillins patterns. Available in 1/8" (3mm), 1/4" (6mm), 3/8" (9mm), & 1/2" (12mm). Sold in pairs
What screw size should I use?
Pads 1/8": 1" to 1.125" screws
Pads 1/4": 1.125" to 1.25" screws
Pads 3/8" and 1/2": 1.5" screws
Data sheet
- Truck Hole Pattern
- Short 4 - 2.125" (New School), Length: 4 -2.5" (Old School)
Redesigned from the ground up and incorporating technology perfected in the high end DH and Freeride trucks, Gen 6 Grizzlies are the best performing cast trucks on the market today. Game changing strength and highly refined steering geometry are just the tip of the iceberg, Gen 6 Grizzlies 50° 130mm are Downhill/f Freeride oriented trucks. They would fit best on narrow decks. 130mm are more turny and have more traction to compare with 180mm trucks. Hollow Kingpin. Set with 83A Step Barrel / Cone Bushings. Sold as a single truck
Data sheet
- Width
- 130mm
- Construction
- Cast Aluminium, Hollow Kingpin
- Disciplines
- Freeride, Downhill
- Kingpin Angle
- 50°
- Geometry
- Inverted
- Trucks Axles Diameter
- 8mm(Standard)
Redesigned from the ground up and incorporating technology perfected in the high end DH and Freeride trucks, Gen 6 Grizzlies are the best performing cast trucks on the market today. Game changing strength and highly refined steering geometry are just the tip of the iceberg, Gen 6 Grizzlies 30° 130mm are Downhill oriented trucks. They would fit best on narrow decks and be set as a rear truck matching with a Gen5 40° or 50° at the front. 130mm are more turny and have more traction to compare with 180mm trucks. Hollow Kingpin. Set with 95A Step Barrel / Barrel Bushings. Sold as a single truck
Data sheet
- Width
- 130mm
- Construction
- Cast Aluminium, Hollow Kingpin
- Disciplines
- Downhill
- Kingpin Angle
- 30°
- Geometry
- Inverted
- Trucks Axles Diameter
- 8mm(Standard)
The Nut Classic Steel Balls Built-In bearings with integrated spacers and speed rings are specifically designed for longboarding. Their precise manufacturing ensures a perfect fit in the wheels and along the axles, providing optimal alignment and a smooth ride. Equipped with 7 steel balls lubricated with low-viscosity oil and a finish of quality equivalent to or higher than Abec-9, the Nut Steel Balls Built-In deliver exceptional speed performance, making them ideal for downhill, pump track, LDP, as well as cruising and dancing. Thanks to their two removable rubber shields, the bearings stay cleaner for longer. This set includes 8 bearings, compatible with most skateboard and longboard wheels (not compatible with roller skates).
Data sheet
- Trucks Axles Diameter
- 8mm(Standard)
- Balls material
- Steel
- Built-In Spacers?
- With Built-In Spacers
Data sheet
- Width
- 65mm, 65mm
- Contact Patch
- 65mm, 65mm
- Core Placement
- Center-set
- Lip profile
- Square Lip
- Wheel surface
- Smooth
- Diameter
- 76mm
- Durometer(s)
- 76A
- Disciplines
- Fast Freeride, Downhill
- Gap width between bearing seats
- 10mm(Skateboard/Longboard standard)
- Grip level
- 5/5