Deutsch
Español
Français
There are no more items in your cart
Zenit MOTH Fabio Minning 30" Longboard Complete
€645.85
€609.95
Tax included
Pack description
This Zenit MOTH Pro Fabio Minning 30" x 9" is a true formula 1 of skateboard. For this exceptional deck, the Quebec brand uses high-quality noble materials with a poplar, carbon, fiberglass construction, and urethane inserts and contour field. The Zenit Moth is both extremely light (deck alone:1.48Kg) and perfectly rigid. Its compact format with a 19.5"-20.75" wheelbase offers great agility to confront with control the most committed trajectories and overtakes at very high speed. The progressive concave, higher on the edges, pairs perfectly with the use of a foot stop and/or torque block, and ensures good support without being restrictive. The Zenit MOTH is equipped with holes to accommodate a foot stop and a gravity plate. Skate for the most demanding racers in search of maximum performance. Completely waterproof deck handcrafted in Montreal (Canada). Complete skate equipped with Bear Grizzly Gen6 155mm 50°/40° trucks, Nut Steel Balls bearings with built-in spacers, and fast freeride Arbor 71mm 78A wheels.
Pack Informations
This Zenit MOTH Pro Fabio Minning 30" x 9" is a true formula 1 of skateboard. For this exceptional deck, the Quebec brand uses high-quality noble materials with a poplar, carbon, fiberglass construction, and urethane inserts and contour field. The Zenit Moth is both extremely light (deck alone:1.48Kg) and perfectly rigid. Its compact format with a 19.5"-20.75" wheelbase offers great agility to confront with control the most committed trajectories and overtakes at very high speed. The progressive concave, higher on the edges, pairs perfectly with the use of a foot stop and/or torque block, and ensures good support without being restrictive. The Zenit MOTH is equipped with holes to accommodate a foot stop and a gravity plate. Skate for the most demanding racers in search of maximum performance. Completely waterproof deck handcrafted in Montreal (Canada). Complete skate equipped with Bear Grizzly Gen6 155mm 50°/40° trucks, Nut Steel Balls bearings with built-in spacers, and fast freeride Arbor 71mm 78A wheels.
Pack content
This Zenit MOTH Pro Fabio Minning 30" x 9" is a true formula 1 of skateboard. For this exceptional deck, the Quebec brand uses the best high-quality materials with a poplar, carbon, fiberglass construction, and polyurethane inserts and contour field. The Zenit Moth is both extremely light (1.48Kg) and perfectly rigid. Its compact format with wheelbase 19.5"-20.75" offers great agility to choose to confront with control the trajectories and overtakes most engaged at very high speed. The progressive concave, higher on the edges, pairs perfectly with the use of a foot stop and/or torque block, and ensures good supports without being restrictive. The Zenit MOTH is already drilled to accommodate a foot stop and/or a gravity plate. This skate is made for the most demanding racers in search of maximum performance. Completely waterproof deck handcrafted in Montreal (Canada). Grip tape not included
Data sheet
- Width
- 9"(22,86cm)
- Construction
- Poplar, Fiberglass, Carbon
- Wheelbase
- 19.5", 20.75"
- Concave
- Medium
- Grip tape
- Not Included
- Weight
- 1.48Kg
- Flex
- No Flex
- Disciplines
- Downhill, Freeride
- Kicks
- No Kick
- Mounting of Trucks
- Top mount
- Lenght
- 30"
Jessup Roam Rough griptape for longboards. 11" width. Sold per 10cm sections with a minimum of 100cm. Jessup is a skateboard griptape leader for years. Grip is fexy, grippy, and easy to instal. When buying deck and griptape in the same time, we can stick the grip on the deck for you and for free. Just ask us on your order comment.
Semi-flexible flat riser pads. Riser pads to raise the ground clearance of the skateboard to prevent wheelbite and isolate the deck from trucks to reduce vibration. 6-hole pads, compatible with New School and Old School drillins patterns. Available in 1/8" (3mm), 1/4" (6mm), 3/8" (9mm), & 1/2" (12mm). Sold in pairs
What screw size should I use?
Pads 1/8": 1" to 1.125" screws
Pads 1/4": 1.125" to 1.25" screws
Pads 3/8" and 1/2": 1.5" screws
Data sheet
- Truck Hole Pattern
- Short 4 - 2.125" (New School), Length: 4 -2.5" (Old School)
Redesigned from the ground up and incorporating technology perfected in the high end DH and Freeride trucks, Gen 6 Grizzlies are the best performing cast trucks on the market today. Game changing strength and highly refined steering geometry are just the tip of the iceberg, Gen 6 Grizzlies 50° 155mm are all around trucks for Dancing, Carving, Freeride, Pumptrack, LDP,.. They would fit best on narrow decks. 155mm are more turny to compare with 180mm trucks. Hollow Kingpin. Set with 85A Step Barrel / Cone Bushings. Sold as a single truck
Data sheet
- Width
- 155mm(6.1")
- Construction
- Hollow Kingpin, Cast Aluminium
- Disciplines
- Pumptrack, LDP, Downhill, Freeride, Dancing, Carving, Cruising
- Kingpin Angle
- 50°
- Geometry
- Inverted
- Trucks Axles Diameter
- 8mm(Standard)
Redesigned from the ground up and incorporating technology perfected in the high end DH and Freeride trucks, Gen 6 Grizzlies are the best performing cast trucks on the market today. Game changing strength and highly refined steering geometry are just the tip of the iceberg, Gen 6 Grizzlies 40° 155mm are Downhill/Freeride oriented. They would fit best on narrow decks. 155mm are more turny to compare with 180mm trucks, will the 40° Baseplate would add some extra stability. Hollow Kingpin. Set with 90A Step Barrel / Cone Bushings. Sold as a single truck
Data sheet
- Width
- 155mm(6.1")
- Construction
- Cast Aluminium, Hollow Kingpin
- Weight
- 417Grs
- Disciplines
- Freeride, Downhill
- Kingpin Angle
- 40°
- Geometry
- Inverted
- Trucks Axles Diameter
- 8mm(Standard)
The Nut Classic Steel Balls Built-In bearings with integrated spacers and speed rings are specifically designed for longboarding. Their precise manufacturing ensures a perfect fit in the wheels and along the axles, providing optimal alignment and a smooth ride. Equipped with 7 steel balls lubricated with low-viscosity oil and a finish of quality equivalent to or higher than Abec-9, the Nut Steel Balls Built-In deliver exceptional speed performance, making them ideal for downhill, pump track, LDP, as well as cruising and dancing. Thanks to their two removable rubber shields, the bearings stay cleaner for longer. This set includes 8 bearings, compatible with most skateboard and longboard wheels (not compatible with roller skates).
Data sheet
- Trucks Axles Diameter
- 8mm(Standard)
- Balls material
- Steel
- Built-In Spacers?
- With Built-In Spacers
The Summit 71mm is Arbor’s technical downhill / Fast Freeride wheel. Daniel McDonald Pro Model. 78A Apex Formula. The Groovetube core profile holds the urethane's shape under demanding conditions to offer improved grip, roll speed, slide characteristics, and durability. A leaf-spring sidewall and mid-angle lip work together to create the rebound and power needed to consistently hug the road. Set of 4 Wheels
Data sheet
- Width
- 56mm
- Contact Patch
- 56mm
- Core Placement
- Off-set
- Lip profile
- Square Lip
- Wheel surface
- Smooth
- Diameter
- 71mm
- Durometer(s)
- 78A
- Disciplines
- Fast Freeride, Downhill, Freeride
- Gap width between bearing seats
- 10mm(Skateboard/Longboard standard)
- Grip level
- 4/5