Deutsch
Español
Français
There are no more items in your cart
Arbor Shakedown 37" Deathroll Longboard Complete
Arbor Shakedown Deathroll 37" x 9.375" is a hybrid skateboard that stands out for its extreme versatility. This board, made of 7-ply Canadian maple from eco-managed forests, will accompany you from the skatepark to freeriding, including bowl, pumptrack, tech slides, and cruising. It features a double kick profile with machined wheel wells. With an 18.625" wheelbase, the additional 3" compared to the 34" model makes this Shakedown 37" more comfortable for freeriding. It's equipped with Paris Street 169mm trucks, Abec 7 bearings, and Arbor Bogart 61mm 78A soft wheels.
Pack description
Arbor Shakedown Deathroll 37" x 9.375" is a hybrid skateboard that stands out for its extreme versatility. This board, made of 7-ply Canadian maple from eco-managed forests, will accompany you from the skatepark to freeriding, including bowl, pumptrack, tech slides, and cruising. It features a double kick profile with machined wheel wells. With an 18.625" wheelbase, the additional 3" compared to the 34" model makes this Shakedown 37" more comfortable for freeriding. It's equipped with Paris Street 169mm trucks, Abec 7 bearings, and Arbor Bogart 61mm 78A soft wheels.
Wood material comes from sustainable sources of supply; Wood by-product is reclaimed for use in other products; Decks are produced using eco friendly water-based sanding sealers
Pack content
Arbor Shakedown Deathroll 37" x 9.375" is a hybrid skateboard deck that stands out for its extreme versatility. This 7-ply deck made from Canadian maple sourced from sustainable forests will accompany you from the skatepark to freeride, bowl, pumptrack, tech slides, and cruising. It features a double kicks profile with machined wheel wells. 18.625" wheelbase. 3" longer than the 34" model, makes this deck more comfortable for freeriding. Grip tape not included
Mounting recomandations
For best result, we recommend using traditional kingpin geometry trucks such as caliber Standard 9", Paris Street 169mm or Independent 169mm, and Wheel ranging from 60mm to 65mm. If using wheels over 60mm diamieter, the add of a riser pad would be needed.
Wood material comes from sustainable sources of supply; Wood by-product is reclaimed for use in other products; Decks are produced using eco friendly water-based sanding sealers
Data sheet
- Width
- 9.375"
- Construction
- 7-Plys Maple
- Wheelbase
- 18.625"
- Griptape
- Not Included
- Disciplines
- Bowl, Pumptrack, Carving, Cruising, Tech Slides, Downhill, Freeride
- Kicks
- Double Kicks
- Mounting of Trucks
- Top mount
- Shape
- Standard Popsicle
- Lenght
- 37"
Jessup Black 10" x 40" Skateboard and Longboard griptape. Standard grit. Easy to instal.
Data sheet
- Main Color
- Black
Semi-flexible flat riser pads. Riser pads to raise the ground clearance of the skateboard to prevent wheelbite and isolate the deck from trucks to reduce vibration. 6-hole pads, compatible with New School and Old School drillins patterns. Available in 1/8" (3mm), 1/4" (6mm), 3/8" (9mm), & 1/2" (12mm). Sold in pairs
What screw size should I use?
Pads 1/8": 1" to 1.125" screws
Pads 1/4": 1.125" to 1.25" screws
Pads 3/8" and 1/2": 1.5" screws
Data sheet
- Truck Hole Pattern
- Short 4 - 2.125" (New School), Length: 4 -2.5" (Old School)
The Paris Street Truck Family will allow you to take your Combine, Hybrid, Street or Mini to new levels. With a taller profile than standard conventional trucks, risers may not be needed. Paris Street 169mm is especially good for tech sliding. Sold as a single truck
Bigger Wheels? NO PROBLEM! Now roll easy to those hard to get places with better maneuverability and better turnability. You’ll get a better ride every time. It’s time to make the switch!
-
356.2 virgin aluminum gravity molded baseplate and hanger.
-
Secondary heat treatment process for added strength and durability.
-
Heat–treated to Rockwell rating T6 for hangers, and T5 for baseplates.
-
Grade 8 axles and branded kingpins.
-
6 hole pattern – new school and old school
-
93A Divine urethane bushings.
-
Tall – 57.15 mm axle height for added wheel size capability.
This 169mm version gives best results on boards and decks width ranging from 9'' to 10''
Sold as a single truck
Data sheet
- Width
- 169mm(6.65")
- Construction
- Cast Aluminium
- Wheel surface
- Raw, Raw
- Weight
- 434grs, 434grs
- Disciplines
- Cruiser, Bowl
- Geometry
- Traditional
- Bushings Heights & Shapes
- Barrel, Cone, Street Height 0.5"
- Recommended Board Size
- 9.6" to 10.5", 9" to 9.5"
- Trucks Axles Diameter
- 8mm(Standard)
The Nut Classic Steel Balls Built-In bearings with integrated spacers and speed rings are specifically designed for longboarding. Their precise manufacturing ensures a perfect fit in the wheels and along the axles, providing optimal alignment and a smooth ride. Equipped with 7 steel balls lubricated with low-viscosity oil and a finish of quality equivalent to or higher than Abec-9, the Nut Steel Balls Built-In deliver exceptional speed performance, making them ideal for downhill, pump track, LDP, as well as cruising and dancing. Thanks to their two removable rubber shields, the bearings stay cleaner for longer. This set includes 8 bearings, compatible with most skateboard and longboard wheels (not compatible with roller skates).
Data sheet
- Trucks Axles Diameter
- 8mm(Standard)
- Balls material
- Steel
- Built-In Spacers?
- With Built-In Spacers
Soft and lightweight, the Arbor Bogart is designed for pure sidewalk surfing on your quick commute. This 61mm wheel is perfect for making a few turns on a trip to the corner store or dodging obstacles when pushing through campus. 61MM | 78A | CP: 36.0MM | OS: 2.5MM. Set of 4 Wheels
Data sheet
- Width
- 45mm
- Contact Patch
- 36mm
- Core Placement
- Off-set
- Lip profile
- Round Lip
- Wheel surface
- Smooth
- Diameter
- 61mm
- Durometer(s)
- 78A
- Disciplines
- Cruiser, Pumptrack
- Gap width between bearing seats
- 10mm(Skateboard/Longboard standard)
- Grip level
- 3/5