Deutsch
Español
Français
There are no more items in your cart
Seismic Dre Nubine Trishul 31" Longboard Complete
€395.05
€374.95
Tax included
Pack description
Be ready for some speed ruch with this amazing Seismic Dre Nubine DH skate complete! Born from the collaboration between Dr. Nubine and Seismic, the Trishul 31" x 8.9" (WB 21"-22") was meticulously designed to meet the demands of modern high-speed downhill skating. Every detail of this board has been crafted to push the limits of performance, offering maximum control, flawless stability, and surgical maneuverability. Its aggressive yet fluid shape features a streamlined nose, tapered tail, harmonious elliptical concave, and a progressive rocker that naturally adds angle to the front truck for heightened agility in the most technical lines.
The ergonomic design hugs the front foot perfectly, providing a secure locked-in feel while delivering powerful leverage and enhanced stability. At the rear, the generously sized gas pedals, combined with the subtle rocker tilt, ensure optimal grip—even in the middle of a curve or over uneven terrain. A strategically placed area behind these zones allows you to add a torque block if needed.
The Trishul also stands out for its ultra-technical construction: 8 plies of maple reinforced with 45/45° fiberglass, laminated with next-generation epoxy resin for impressive torsional stiffness. The result: controlled slides, solid footing, and flawless traction through the most committed turns.
Lastly, its ultra-precise wheel wells are designed to accommodate the most demanding setups, with offset truck geometries made for competition.
Pack Informations
Be ready for some speed ruch with this amazing Seismic Dre Nubine DH skate complete! Born from the collaboration between Dr. Nubine and Seismic, the Trishul 31" x 8.9" (WB 21"-22") was meticulously designed to meet the demands of modern high-speed downhill skating. Every detail of this board has been crafted to push the limits of performance, offering maximum control, flawless stability, and surgical maneuverability. Its aggressive yet fluid shape features a streamlined nose, tapered tail, harmonious elliptical concave, and a progressive rocker that naturally adds angle to the front truck for heightened agility in the most technical lines.
Pack content
Born from the collaboration between Dr. Nubine and Seismic, the Trishul 31" x 8.9" (WB 21"-22") was meticulously designed to meet the demands of modern high-speed downhill skating. Every detail of this board has been crafted to push the limits of performance, offering maximum control, flawless stability, and surgical maneuverability. Its aggressive yet fluid shape features a streamlined nose, tapered tail, harmonious elliptical concave, and a progressive rocker that naturally adds angle to the front truck for heightened agility in the most technical lines.
The ergonomic design hugs the front foot perfectly, providing a secure locked-in feel while delivering powerful leverage and enhanced stability. At the rear, the generously sized gas pedals, combined with the subtle rocker tilt, ensure optimal grip—even in the middle of a curve or over uneven terrain. A strategically placed area behind these zones allows you to add a torque block if needed.
The Trishul also stands out for its ultra-technical construction: 8 plies of maple reinforced with 45/45° fiberglass, laminated with next-generation epoxy resin for impressive torsional stiffness. The result: controlled slides, solid footing, and flawless traction through the most committed turns.
Lastly, its ultra-precise wheel wells are designed to accommodate the most demanding setups, with offset truck geometries made for competition.
Data sheet
- Width
- 8.9"
- Construction
- 8-Ply Maple + Fiberglass
- Wheelbase
- 21", 22"
- Grip tape
- Not Included
- Flex
- No Flex
- Disciplines
- Downhill, Freeride
- Kicks
- No Kick
- Mounting of Trucks
- Top mount
- Lenght
- 31"
Redesigned from the ground up and incorporating technology perfected in the high end DH and Freeride trucks, Gen 6 Grizzlies are the best performing cast trucks on the market today. Game changing strength and highly refined steering geometry are just the tip of the iceberg, Gen 6 Grizzlies 50° 130mm are Downhill/f Freeride oriented trucks. They would fit best on narrow decks. 130mm are more turny and have more traction to compare with 180mm trucks. Hollow Kingpin. Set with 83A Step Barrel / Cone Bushings. Sold as a single truck
Data sheet
- Width
- 130mm
- Construction
- Cast Aluminium, Hollow Kingpin
- Disciplines
- Freeride, Downhill
- Kingpin Angle
- 50°
- Geometry
- Inverted
- Trucks Axles Diameter
- 8mm(Standard)
Redesigned from the ground up and incorporating technology perfected in the high end DH and Freeride trucks, Gen 6 Grizzlies are the best performing cast trucks on the market today. Game changing strength and highly refined steering geometry are just the tip of the iceberg, Gen 6 Grizzlies 40° 130mm are Downhill/f Freeride oriented trucks. They would fit best on narrow decks. 130mm are more turny and have more traction to compare with 180mm trucks. Hollow Kingpin. Set with 85A Step Barrel / Cone Bushings. Sold as a single truck
Data sheet
- Width
- 130mm
- Construction
- Cast Aluminium, Hollow Kingpin
- Disciplines
- Freeride, Downhill
- Kingpin Angle
- 40°
- Geometry
- Inverted
- Trucks Axles Diameter
- 8mm(Standard)
The Nut Classic Steel Balls Built-In bearings with integrated spacers and speed rings are specifically designed for longboarding. Their precise manufacturing ensures a perfect fit in the wheels and along the axles, providing optimal alignment and a smooth ride. Equipped with 7 steel balls lubricated with low-viscosity oil and a finish of quality equivalent to or higher than Abec-9, the Nut Steel Balls Built-In deliver exceptional speed performance, making them ideal for downhill, pump track, LDP, as well as cruising and dancing. Thanks to their two removable rubber shields, the bearings stay cleaner for longer. This set includes 8 bearings, compatible with most skateboard and longboard wheels (not compatible with roller skates).
Data sheet
- Trucks Axles Diameter
- 8mm(Standard)
- Balls material
- Steel
- Built-In Spacers?
- With Built-In Spacers
Data sheet
- Width
- 65mm, 65mm
- Contact Patch
- 65mm, 65mm
- Core Placement
- Center-set
- Lip profile
- Square Lip
- Wheel surface
- Smooth
- Diameter
- 76mm
- Durometer(s)
- 76A
- Disciplines
- Fast Freeride, Downhill
- Gap width between bearing seats
- 10mm(Skateboard/Longboard standard)
- Grip level
- 5/5
Semi-flexible flat riser pads. Riser pads to raise the ground clearance of the skateboard to prevent wheelbite and isolate the deck from trucks to reduce vibration. 6-hole pads, compatible with New School and Old School drillins patterns. Available in 1/8" (3mm), 1/4" (6mm), 3/8" (9mm), & 1/2" (12mm). Sold in pairs
What screw size should I use?
Pads 1/8": 1" to 1.125" screws
Pads 1/4": 1.125" to 1.25" screws
Pads 3/8" and 1/2": 1.5" screws
Data sheet
- Truck Hole Pattern
- Short 4 - 2.125" (New School), Length: 4 -2.5" (Old School)