Koad Nijal Complete Cruiser

Koad Nijal is hand craft in French Britany. This cruiser skateboard is light and fun to ride, great for travelling or moving from a point to an other. The finest woods and glue are used to make this board more than "just a skate". Each deck has something unic and comes hand signed by Its shaper. Specs: 80cm(31.5") x 22cm(8.66") ; Wheelbase 54-57cm(21.26''-22.44'') Flat concave ; Kicktail

Pack description

Koad Nijal is hand craft in French Britany. This cruiser skateboard is light and fun to ride, great for travelling or moving from a point to an other. The finest woods and glue are used to make this board more than "just a skate". Each deck has something unic and comes hand signed by Its shaper. Specs: 80cm(31.5") x 22cm(8.66") ; Wheelbase 54-57cm(21.26''-22.44'') Flat concave ; Kicktail

Pack content

Koad Nijal is hand craft in Britany. This cruiser skateboard is light and fun to ride, great for travelling or moving from a point to an other. The finest woods and glue are used to make this board more than "just a skate". Each deck has something unic and comes hand signed by Its shaper. Griptape non inclued.

Specs:80cm(31.5") x 22cm(8.66") ; Wheelbase 54-57cm(21.26''-22.44'')

Flat concave ; Kicktail ; Made in France

Data sheet

Lenght
31.5"
Width
8.66"
Wheelbase
21.26"-22.44"
Disciplines
Cruiser, Pumptrack
Kicks
Single Kick
Mounting of Trucks
Top mount

Looking to cut some serious turns and get your swerve on? Look no further! The Paris V3 150mm is your go-to carving truck. The narrow hanger allows for quicker turning and increased leverage compared to a wider truck. The 50° baseplate provides an excellent balance of stability and maneuverability. Perfect for smaller boards, smaller riders, and the deep carver in all of us, the Paris 150s will get you diving into quick cuts and surf-inspired slashes in no time!

Paris V3 trucks are produced using Paris’ new, proprietary alloy forming process, which utilizes techniques derived from casting, extrusion and forging. This gives the V3 a molecular structure that provides strength far beyond any other cast truck on the market.

The new manufacturing process also allows Paris to use a true T6 heat-treatment, offering further durability.

Paris has redesigned the hanger’s barrel and shoulders adding more material, and reinforced the baseplate with an additional support beam to increase strength and reduce acute stress to the area.

The kingpins have been modified making them tougher and more resilient and the baseplates come equipped with hand-poured, 96a urethane pivot cups, which provide an ultra-smooth turn and return to center.

Paris V3 150mm 50° trucks are good for:

  • quick turning
  • narrower boards

The Paris V3 Features:

  • Proprietary Alloy Forming Process
  • True T6 Heat Treatment
  • Stronger, Redesigned Hanger
  • SCM440 Alloy Steel Axles
  • Improved 90a Urethane Bushing Formula
  • Redesigned Conical Bushing Shape
  • Lighter, Reinforced Baseplate
  • Redesigned SCM435 Alloy Steel Kingpins
  • 96a Hand Poured Urethane Pivot Cups
  • 50° Baseplate Marker Symbols

Data sheet

Width
150mm(5.9")
Construction
Cast Aluminium
Weight
445Grs
Disciplines
Carving, Cruising, LDP, Slalom
Kingpin Angle
50°
Geometry
Inverted
Trucks Axles Diameter
8mm(Standard)

Set of two skateboard's flat shock pads 1/8" (3mm) depth. Helps reduce vibrations and avoive wheel bites.

Cinetic Nebula is the new name for the Yow Surfskate wheels. It now comes in a wide range of durometers to fit more styles. Cinetic Nebula wheels are very easy to slide and are fun for slide tech, cruising, or freeriding sessions, & Surf skating. 60mm diameter,High Rebound Formula. Set of four wheels

Specs: 60mmx40mm, Contact patch 29mm

Data sheet

Width
44mm
Contact Patch
29mm
Lip profile
Round Lip
Wheel surface
Stone-ground
Diameter
60mm
Durometer(s)
78A, 80A, 82A, 84A
Disciplines
Bowl, Dancing, Cruiser, Slides, Surfskate
Gap width between bearing seats
10mm(Skateboard/Longboard standard)
Grip level
1/5, 2/5

Abec 7 Skateboard & Roller skate bearings type 608. Fit on most wheels and trucks. Steel balls and nylon shields on both sides. The highest quality that you can get for this value. Set of 8 Bearings(for 4 wheels)

Data sheet

Trucks Axles Diameter
8mm(Standard)
Balls material
Steel
Built-In Spacers?
Without Built-In Spacers

Standard skate bearings spacers. To be used with 8mm axles. Fit on most skateboard and longboard wheels. The spacers will help keeping the bearings in place into the wheels, improving your riding precision. Set of four spacers

Data sheet

Gap width between bearing seats
10mm(Skateboard/Longboard standard)
Trucks Axles Diameter
8mm(Standard)

Jessup is the number one seller for skateboarding grip tape. Solid and easy to stick. 9"x33" is what you need to grip one street deck.

Data sheet

Main Color
Black