Rocket Hades Black Complete Longboard

The Hades is a hardline downhill & fast freeride board. The rocker is restricted to the foot platform so there is no influence on the angle of the trucks. Thanks to the wheel well flares and the flush cut at the front, the concave continues despite the flat nose. This allows the rider to stand above the front truck. Set with Jessup Roam Griptape, Caliber II Forty Four 10" Trucks, Zealous Classics Bearings, Powell Peralta Reimer 72mm Wheels

Pack description

The Hades is a hardline downhill & fast freeride board. The rocker is restricted to the foot platform so there is no influence on the angle of the trucks. Thanks to the wheel well flares and the flush cut at the front, the concave continues despite the flat nose. This allows the rider to stand above the front truck. A steady stance in the tuck is guaranteed by the slight rocker in the front half of the board. The steeper part of the asymmetrical rocker and the slight w-concave at the back of the board provide a pocket for the rider’s foot. So you can even ride fast sweepers in a tuck without changing the position of your foot. Combined with the wheel well flares at the back, the rider always gets good feedback on his position on the board.

Specs

Length: 88 cm / 34.65"
Width: 24.6 cm / 9.68”
Wheelbase: 63.5cm / 68 cm / 25" / 26.77”
Construction: SFI-certified Canadian maple, Carbon fiber, Embossed ABS topsheet

Pack content

The Hades is a hardline downhill & fast freeride board. The rocker is restricted to the foot platform so there is no influence on the angle of the trucks. Thanks to the wheel well flares and the flush cut at the front, the concave continues despite the flat nose. This allows the rider to stand above the front truck. A steady stance in the tuck is guaranteed by the slight rocker in the front half of the board. The steeper part of the asymmetrical rocker and the slight w-concave at the back of the board provide a pocket for the rider’s foot. So you can even ride fast sweepers in a tuck without changing the position of your foot. Combined with the wheel well flares at the back, the rider always gets good feedback on his position on the board.

Specs

Length: 88 cm / 34.65"
Width: 24.6 cm / 9.68”
Wheelbase: 63.5cm / 68 cm / 25" / 26.77”
Construction: SFI-certified Canadian maple, Carbon fiber, Embossed ABS topsheet

Data sheet

Lenght
34.65"(88cm)
Width
9.68"(24.6cm)
Wheel surface
Canadian Maple, Carbon Fiber, ABS Topsheet
Wheelbase
25"-26.77"(63.5-68cm)
Griptape
Not Included
Weight
2.2Kg
Disciplines
Downhill, Freeride
Kicks
No Kick
Mounting of Trucks
Top mount

Jessup Roam Rough griptape for longboards. 11" width x 40" lenght. Jessup is a skateboard griptape leader for years. Grip is fexy, grippy, and easy to instal. When buying deck and griptape in the same time, we can stick the grip on the deck for you and for free. Just ask us on your order comment.

Set of two skateboard's flat shock pads 1/8" (3mm) depth. Helps reduce vibrations and avoive wheel bites.

Caliber Forty Four 10" (184mm) second generation. This best seller freeride and downhill longboard truck comes back with a batch of improvements making it stronger and more accurate.

Axles are now heat treated and are 40% stronger to compare with the first generation. The bushing seat has been readjust to fit perfectly aftermarket bushings without slop. The new pivot cup prevent side to side play as the cup breaks in. Base plate has been renforced around pressed in grade 8 kingpin for more resistance against high speed impacts. Use of a thinner paint for thighten tolerence and optimal performance. Trucks comes fit with Blood Orange Brarrels UHR 89a. 44° baseplate, 10" width (184mm)

Color: Black. Sold as a single truck

Data sheet

Width
184mm
Construction
Cast Aluminium
Wheel surface
Blackout Black
Weight
465grs
Disciplines
Downhill, Freeride
Kingpin Angle
44°
Geometry
Inverted
Trucks Axles Diameter
8mm(Standard)

Zealous Bearings. Precision 8mm axle holes .409" built in spacers 1mm built in speedrings Green rubber seals to keep dirt and debris on the outside of the bearing. Lubed with Archoil Nanoceramic Grease

-The unique feature of our lubricant is how the nanoceramic compound fills in deformations or asperities in the bearing. These deformations cause friction and heat around them which hardens the nano-ceramic compound to that specific area. This micro coating is 5 times the hardness of the host alloy and has a molecular bond with the host metal, filling in all the asperities and eliminating friction over time.

-The coefficient of friction is the lowest in the field of Tribology at 0.003% creating a near frictionless surface. Mainly because the nanoceramic compound eliminates all asperities.

-Extremely low water washout

-Corrosion on the inside of the bearing is nearly eliminated

Set of eight bearings

Data sheet

Trucks Axles Diameter
8mm(Standard)
Balls material
Steel
Built-In Spacers?
With Built-In Spacers

The 72mm Kevin Reimer wheel from Powell-Peralta is an all-around DH performer. Poured in SSF( 75A Purple, 80A Yellow) and SSF PRO(Green) Formula. This is a downhill race wheel with the skin on, and then can serve you as a fast freeride wheel afterwards - Truly the best of both worlds. This is the new version that comes with the black H5 fibre infused core, and a new "inset" lip that will let the wheel grip more, and wear better. The Purple is less grippy than the Green. The yellow SSF have a more "on top of the pavement feel, is more durable, and a more firm catch when you come back into traction with lots of slide in the middle. Set of 4 Wheels

  • Brilliant Surface - More grip when new
  • Sharp edges offer extra flex for grip while carving, or sliding
  • SSF PRO - 30% more grip than SSF 
  • Smooth sliding, but grip oriented shape for carving or racing
  • Suitable for freeride when broken in 
  • 2mm inset with new H5 core, still flippable for even wear

Being a race wheel with sharp lips, you may lose small chunks while sliding, or when the wheel is worn down more than a few millimeters. They are not suggested for riding on very rough surfaces, those with large cracks, or for use carving around sidewalks due to their very soft 75a compound. the yellow 80a are more durable on rough surfaces

Data sheet

Width
56mm
Contact Patch
56mm
Core Placement
In-set
Lip profile
Square Lip
Wheel surface
Smooth
Diameter
72mm
Durometer(s)
75A, 80A
Disciplines
Downhill, Fast Freeride
Gap width between bearing seats
10mm(Skateboard/Longboard standard)
Grip level
4/5