RipTide Pivot cups Tensor Aluminium & Mag Light Trucks

<p>Independent replacement pivot cups. Those cups are the same as the factory Independent cups and are made of plastic. Those cups fits most skateboard trucks: Independent, Thunder, Venture, Slant, Iron, Bennett, Yow Meraki, Evolve, Gullwing Sidewinder,... <strong>Set of two cups</strong></p>

<p>Riptide Pivot Cups for Mini Logo trucks. Made from 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Riptide Pivot Cups for Ace Skateboard trucks. Made from 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Riptide Pivot Street Cups for Caliber Standard(Street) trucks. Made of urethane 96a, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p> <p></p>

<p>Riptide Pivot Cups for Film skateboard trucks. Made from 96a urethane, cups helps trucks being more accurate, avoid squeezy noise and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Tensor Trucks ATG Replacement Pivot Cups. <strong>Set of two cups</strong></p> <p><strong></strong></p>

<p>Riptide Pivot Cups for Venture trucks. Made from 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Riptide Pivot Cups for Paris Street trucks. Made of urethane 96a, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Bolzen skateboard mounting hardware. Phillips flat head. 1"=&gt;Board without pads; 1.25"=&gt; Board with pads up to 1/4"; 1.75"=&gt; Board with pads up to 1/2"; 2" Board with wedged pads up to 8°; 2.5"=&gt; Board with wedged pads up to 15°; 3"=&gt; Board set with double wedged pads. <strong>Set of 8 bolts &amp; nuts</strong></p>

<p>Riptide Pivot Cups for Independent  and Bennett trucks. Made from 96a urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>Set of two Angled riser Pads. 5° Wedge. 9,5mm to 14mm depth. 8 Holes. Soft duro</p>

<p>Riptide Street Cones/ Short Street Cones combo in APS Formula. Those bushings are a real upgrade for your skateboard trucks. The high quality urethane range from 60A(extremly soft) to 97.5A(Hard), so no matter if you are a yound kid or a fat old guy, you will get the duro that you need. Cone/ Cone combo works great if your are looking for more agility and deeper lean. Fit most " indy style" conventional trucks(Indepedendent, Venture, Tensor, Iron, Thunder,...) <strong>Set of 4 cushions with cup washers.</strong></p>

<p>Riptide Krank barrel bushings. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! <strong>Set of 2 bushings(for one truck)</strong></p>

<p>Seismic Lokton is noticeably sharper, tougher, and grippier. Grit stays ultra-sharp, doesn’t flake off. No smearing or peeling, even in heat or rain. The best downhill longboarding grip in the history of grip. Lock in with Lokton™! Midnigh blue color. <strong>11" x 40" sheet</strong></p>

<p>Powell Peralta tail Bone is great for adding that old school flavour on a pool/re issue board. Tail Bone cover the the rear tip of the tail for protection when turning and stoppping. Size 8", Mounting bolts included</p>

<p>RipTide Cones are a classic shape for carving and slalom. It ensure a maximum turnability and rebound. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! Set of 2 bushings(for one truck)</p>