RipTide Pivot Cups Bear Vintage

Riptide Pivot Cups for Bear old generations(before 2014). Size: External diamter: 18.8mm; Internal Diameter: 11.7mm; Heigth:16mm. Made from WFB 96a urethane, cups helps trucks being more accurate and minimise vibrations. Set of two cups.

If you're looking to replace the Pivot Cups of your Bear Grizzly Trucks - please read carefully!  Pivot Cup sizes are different among some seemingly-same Bear Grizzly Trucks before Generation 5 came out around 2014.  If your Trucks have '5.01' on the hanger (or if you have purchased them new from Landyachtz or a reputable Skate shop within the last 3 years) - your chances are good the Bear Grizzly 5.01 Pivot Cups are the proper size.  The only sure way to be sure what cups you have is to measure the diameter of the cup with calipers.  Generation 5 will be about .70" (17.8mm) the other size (Vintage) will be .74" (18.8mm).  It seems like such a small difference, but it's enough of a difference that the Pivot Cup you order will either drop right in the hole, or there's no possible way you can fit it in the hole.....As you can imagine, this is a bit of a nightmare for us to deal with on an aftermarket basis!