Mindless Surfskate Setup

Here is all what you need to set a surfskate: Mindless 159mm Surf skate trucks, Abec 7 Bearings, Beraing Spacers, Bolts set, Rider Pads, Mindless Viper 65mm 82A centerset wheels.

One of product is no longer available. This pack cant be purchased

Pack description

Here is all what you need to set a surfskate: Mindless 159mm Surf skate trucks, Abec 7 Bearings, Bearing Spacers, Bolts set, Rider Pads, Mindless Viper 65mm 82A centerset wheels.

Pack content

Mindless Longboards Surf Skate truck set. The front and rear truck differ to achieve the perfect fast, tight, progressive ride. Fast turns, snappy cut backs and super smooth carving perfect for all levels of riding. Turn any deck into surf skate. Sold as a set with risers & Bolts

Mindless tested every setup they could to get the smoothest ride possible. Washers, pivot cups, bushing hardness and heights were tirelessly swapped and tweaked to make the most of the precision geometry.

73° Angle king pin rear truck; 90° Angle king pin front truck; Hanger Width 159mm

Data sheet

Width
159mm(6.26")
Construction
Cast Aluminium
Disciplines
Surfskate
Trucks Axles Diameter
8mm(Standard)

Abec 7 Skateboard & Roller skate bearings type 608. Fit on most wheels and trucks. Steel balls and nylon shields on both sides. The highest quality that you can get for this value. Set of 8 Bearings(for 4 wheels)

Data sheet

Trucks Axles Diameter
8mm(Standard)
Balls material
Steel
Built-In Spacers?
Without Built-In Spacers

The Mindless Viper 65mm Wheels are pure allrounders. Ideal for downhill runs to hitting your local ledge. Centre set core makes coning a thing of a past. More than enough grip and control in any situation. Small enough to fit under smaller decks, big enough to ride over any cracks and bumps! Set of 4 wheels

Data sheet

Width
44mm
Contact Patch
31mm
Core Placement
Center-set
Lip profile
Round Lip
Wheel surface
Stone-ground
Diameter
65mm
Durometer(s)
80A
Weight
485Grs/ Set of 4 Wheels
Disciplines
Carving, Cruising, Dancing, Freeride, Pumptrack, Slides, Surfskate
Gap width between bearing seats
10mm(Skateboard/Longboard standard)
Grip level
1/5

Standard skate bearings spacers. To be used with 8mm axles. Fit on most skateboard and longboard wheels. The spacers will help keeping the bearings in place into the wheels, improving your riding precision. Set of four spacers

Data sheet

Gap width between bearing seats
10mm(Skateboard/Longboard standard)
Trucks Axles Diameter
8mm(Standard)