Deutsch
Español
Français
There are no more items in your cart
FREE SHIPPING from €70 France & Benelux - €130 Germany, Spain, Italy, Portugal - €190 rest of EU & Switzerland
Mindless Surfskate Setup
Here is all what you need to set a surfskate: Mindless 159mm Surf skate trucks, Abec 7 Bearings, Beraing Spacers, Bolts set, Rider Pads, Mindless Viper 65mm 82A centerset wheels.
Pack description
Here is all what you need to set a surfskate: Mindless 159mm Surf skate trucks, Abec 7 Bearings, Bearing Spacers, Bolts set, Rider Pads, Mindless Viper 65mm 82A centerset wheels.
Pack content
- Mindless Surf Skates Trucks(Set)
- Abec 7 Skateboard & Roller skate Bearings(8Pk)
- Mindless Viper 65mm Longboard Wheels
- Bearing spacers 8 X 10mm (Set of 4)
Mindless Longboards Surf Skate truck set. The front and rear truck differ to achieve the perfect fast, tight, progressive ride. Fast turns, snappy cut backs and super smooth carving perfect for all levels of riding. Turn any deck into surf skate. Sold as a set with risers & Bolts
Mindless tested every setup they could to get the smoothest ride possible. Washers, pivot cups, bushing hardness and heights were tirelessly swapped and tweaked to make the most of the precision geometry.
73° Angle king pin rear truck; 90° Angle king pin front truck; Hanger Width 159mm
Data sheet
- Width
- 159mm(6.26")
- Construction
- Cast Aluminium
- Disciplines
- Surfskate
- Trucks Axles Diameter
- 8mm(Standard)
Abec 7 Skateboard & Roller skate bearings type 608. Fit on most wheels and trucks. Steel balls and nylon shields on both sides. The highest quality that you can get for this value. Set of 8 Bearings(for 4 wheels)
Data sheet
- Trucks Axles Diameter
- 8mm(Standard)
- Balls material
- Steel
- Built-In Spacers?
- Without Built-In Spacers
The Mindless Viper 65mm Wheels are pure allrounders. Ideal for downhill runs to hitting your local ledge. Centre set core makes coning a thing of a past. More than enough grip and control in any situation. Small enough to fit under smaller decks, big enough to ride over any cracks and bumps! Set of 4 wheels
Data sheet
- Width
- 44mm
- Contact Patch
- 31mm
- Core Placement
- Center-set
- Lip profile
- Round Lip
- Wheel surface
- Stone-ground
- Diameter
- 65mm
- Durometer(s)
- 80A
- Weight
- 485Grs/ Set of 4 Wheels
- Disciplines
- Slides, Pumptrack, Freeride, Dancing, Surfskate, Carving, Cruising
- Gap width between bearing seats
- 10mm(Skateboard/Longboard standard)
- Grip level
- 1/5
Standard skate bearings spacers. To be used with 8mm axles. Fit on most skateboard and longboard wheels. The spacers will help keeping the bearings in place into the wheels, improving your riding precision. Set of four spacers
Data sheet
- Gap width between bearing seats
- 10mm(Skateboard/Longboard standard)
- Trucks Axles Diameter
- 10mm(Skateboard/Longboard standard), 8mm(Standard)
- Trucks Axles Diameter
- 8mm(Standard)
SKU:
MLESS-SURFSKATEKIT-PACKFKT