Deutsch
Español
Français
There are no more items in your cart
Powell Peralta OG Ripper 10" Checker Multi Complete Skateboard
Powell Peralta OG Ripper Checker Multi 10". Re issue skateboard from the 80's. Made in USA using 7 plies of the best US maple and grade 1 glue. You will love this board for bowl riding, old school freestyle, or cruising. Premium set with Independent Trucks, Nut Abec 7 Bearings, and Powell Rat Bones 60mm 85A Wheels
Pack description
Powell Peralta OG Ripper Checker Multi 10". Re issue skateboard from the 80's. Made in USA using 7 plies of the best US maple and grade 1 glue. You will love this board for bowl riding, old school freestyle, or cruising. Premium set with Independent Trucks, Nut Abec 7 Bearings, and Powell Rat Bones 60mm 85A Wheels
Specs: 10"x 30"; Wheelbase: 16.25"; Nose lenght: 3"; Tail lenght: 5.95"; 7 plies US maple; Made in USA; warranted against delamination for its useful life
Pack content
Powell Peralta OG Ripper Checker Multi 10". Re issue skateboard from the 80's. Made in USA using 7 plies of the best US maple and grade 1 glue. You will love this board for bowl riding, old school freestyle, or cruising.
Specs: 10"x 30"; Wheelbase: 16.25"; Nose lenght: 3"; Tail lenght: 5.95"; 7 plies US maple; Made in USA; warranted against delamination for its useful life
Data sheet
- Width
- 10"(25,4cm)
- Construction
- 7-Plys Maple
- Wheelbase
- 16.25"
- Nose Lenght
- 3"
- Tail Lenght
- 5.95"
- Concave
- Low
- Griptape
- Not Included
- Disciplines
- Bowl, Cruiser, Pumptrack
- Kicks
- Single Kick
- Mounting of Trucks
- Top mount
- Shape
- Old School
- Year of Release
- 2020
- Lenght
- 30"
Jessup Black 10" x 33" Skateboard griptape sheet. Standard grit. Wide enough to fit on old school skateboards
Data sheet
- Main Color
- Black
Semi-flexible flat riser pads. Riser pads to raise the ground clearance of the skateboard to prevent wheelbite and isolate the deck from trucks to reduce vibration. 6-hole pads, compatible with New School and Old School drillins patterns. Available in 1/8" (3mm), 1/4" (6mm), 3/8" (9mm), & 1/2" (12mm). Sold in pairs
What screw size should I use?
Pads 1/8": 1" to 1.125" screws
Pads 1/4": 1.125" to 1.25" screws
Pads 3/8" and 1/2": 1.5" screws
Data sheet
- Truck Hole Pattern
- Short 4 - 2.125" (New School), Length: 4 -2.5" (Old School)
Independent Skateboard Trucks 169mm. The Stage 11 includes a baseplate update while the hanger remains the same. 169mm works best on decks width 9" to 9.5"
The cavity holes in the baseplate have been filled, making it perfectly balanced and virtually indestructible! The pinch has been moved back a tad to add strength without changing the geometry that makes Indys turn so damn good.
Features
- Sold per truck
- Hanger Length: 162mm
- Axl Length: 8.9"
- BOARD RANGE:9.5"-10.00"
Data sheet
- Height
- 53.5mm
- Width
- 169mm(6.65")
- Construction
- Cast Aluminium
- Bushings Heights & Shapes
- Street Height 0.5", Short Street Height 0.4"
- Recommended Board Size
- 9" to 9.5"
- Trucks Axles Diameter
- 8mm(Standard)
- Axle width
- 9.125"
- Truck Hole Pattern
- Short 4 - 2.125" (New School), Length: 4 -2.5" (Old School)
The Nut Abec-7 bearings are specially designed to meet the demands of skateboarding and roller skating. High-quality materials and precise assembly ensure optimal performance, providing both excellent speed and resistance to wear and impact. Both sides are sealed with a removable, frictionless rubber shield for easy cleaning. The bearings feature seven pre-lubricated steel balls with low-viscosity oil and stainless steel rings. Nut Abec-7 bearings guarantee speed, durability, and easy maintenance. Set of 8 bearings.
Data sheet
- Trucks Axles Diameter
- 8mm(Standard)
- Balls material
- Steel
- Built-In Spacers?
- Without Built-In Spacers
Powell Peralta Rat Bones 60mm, soft cruising, street, and bowl riding wheels. Re issue from 2005. 44mm width, 35mm contact patch, no core, off set hub. Set of four wheels
Data sheet
- Width
- 44mm
- Contact Patch
- 35mm
- Core Placement
- Off-set
- Lip profile
- Round Lip
- Wheel surface
- Smooth
- Diameter
- 60mm
- Durometer(s)
- 90A, 85A
- Disciplines
- Pumptrack, Cruiser, Bowl, Carving, Cruising
- Gap width between bearing seats
- 10mm(Skateboard/Longboard standard)
- Grip level
- 3/5