Deutsch
Español
Français
There are no more items in your cart
Powell Peralta Caballero Chinese Dragon 10" Copper Foil Complete Skateboard
€318.75
€289.95
Tax included
Pack description
Powell Peralta Caballero Chinese Dragon Copper Foil 10" x 30" skateboard complete., Re-issue from the 80's. Vintage shape and highest quality construction. 7-ply premium US maple. This board is a blast for old school skateboarding, bowl riding, or just cruising. Premium mounting with Jessup black Griptape, Independent Trucks, Nut Abec-7 Classics Bearings, Powell Rat Bones 60mm Wheels
Specs: 30" x 10"; Wheelbase 15"; Nose 3.375"; Tail 7"; Medium concave; Tail angle 22°(Steep)
Pack Informations
Powell Peralta Caballero Chinese Dragon Copper Foil 10" x 30" skateboard complete., Re-issue from the 80's. Vintage shape and highest quality construction. 7-ply premium US maple. This board is a blast for old school skateboarding, bowl riding, or just cruising. Premium mounting with Jessup black Griptape, Independent Trucks, Nut Abec-7 Classics Bearings, Powell Rat Bones 60mm Wheels
Pack content
Powell Peralta Steve Caballero Chinese Dragon 10" x 30" in copper foil colorway, is a re-issue from the 80's. Vintage shape with single kick and spoon tail. Powell Peralta high quality construction. Single pressed using grade 1 glue and 7 plies premium US maple. This board is a blast from the past, great for old school skateboarding, bowl riding, or just cruising.
Specs
30" x 10"; Wheelbase 15"; Nose 3.375"; Tail 7"; Medium concave; Tail angle 22°(Steep)
About Steve Caballero
Steve Caballero is a Californian skateboarder born in 1964 to Mexican and Japanese parents. He turned pro in 1980 and continues to skate professionally to this day. His favorite playgrounds are bowls and vert ramps. Steve Caballero's career is remarkable: he invented numerous tricks (such as the Caballerial and Frontside Boardslide), became world champion in vert and street skating in 1987, and was named Skater of the Year in 1981 and 1984. In 1999, Thrasher magazine awarded him the title of Skater of the Century.
Steve has been riding for Powell Peralta since 1984 and was part of the legendary Bones Brigade team alongside Tony Hawk, Rodney Mullen, Lance Mountain, Mike McGill, and Nicky Guerrero. He is also the first skateboarder to have a signature shoe model—the iconic Vans Half Cab, which is still being produced over 20 years later. Steve Caballero's skateboards are often adorned with a dragon, a nod to his Asian heritage.
In addition to his busy pro skating career, Steve is also a talented singer and guitarist, performing in bands such as The Faction, Soda, Odd Man Out, and Urethane.
Video game enthusiasts know Steve Caballero as a playable character in the PlayStation game Tony Hawk's Pro Skater.
Powell Peralta
Powell Peralta is one of the pioneering brands that has shaped and continues to shape the history of skateboarding. Based in California since 1978, the brand is a union of skills between George Powell (an engineer who made his first skateboard in 1957) and Stacy Peralta (one of the very fisrt professional skateboarder). Powell has always stood out for its spirit of innovation and is one of the few brands to own its own factories for the production of decks and wheels. Powell's graphics, such as the Ripper or the Dragon, are an integral part of skate culture.
Data sheet
- Width
- 10"(25,4cm)
- Construction
- 7-Plys Maple
- Wheelbase
- 15"
- Nose Lenght
- 3.875"
- Tail Lenght
- 7"
- Grip tape
- Not Included
- Disciplines
- Cruiser, Bowl
- Kicks
- Single Kick
- Shape
- Old School
- Year of Release
- 2026
- Lenght
- 30"
Jessup Black 10" x 33" Skateboard griptape sheet. Standard grit. Wide enough to fit on old school skateboards
Data sheet
- Main Color
- Black
Semi-flexible flat riser pads. Riser pads to raise the ground clearance of the skateboard to prevent wheelbite and isolate the deck from trucks to reduce vibration. 6-hole pads, compatible with New School and Old School drillins patterns. Available in 1/8" (3mm), 1/4" (6mm), 3/8" (9mm), & 1/2" (12mm). Sold in pairs
What screw size should I use?
Pads 1/8": 1" to 1.125" screws
Pads 1/4": 1.125" to 1.25" screws
Pads 3/8" and 1/2": 1.5" screws
Data sheet
- Truck Hole Pattern
- Short 4 - 2.125" (New School), Length: 4 -2.5" (Old School)
Independent Skateboard Trucks 169mm. The Stage 11 includes a baseplate update while the hanger remains the same. 169mm works best on decks width 9" to 9.5"
The cavity holes in the baseplate have been filled, making it perfectly balanced and virtually indestructible! The pinch has been moved back a tad to add strength without changing the geometry that makes Indys turn so damn good.
Features
- Sold per truck
- Hanger Length: 162mm
- Axl Length: 8.9"
- BOARD RANGE:9.5"-10.00"
Data sheet
- Height
- 53.5mm
- Width
- 169mm(6.65")
- Construction
- Cast Aluminium
- Bushings Heights & Shapes
- Street Height 0.5", Short Street Height 0.4"
- Recommended Board Size
- 9" to 9.5"
- Trucks Axles Diameter
- 8mm(Standard)
- Axle width
- 9.125"
- Truck Hole Pattern
- Short 4 - 2.125" (New School), Length: 4 -2.5" (Old School)
The Nut Abec-7 bearings are specially designed to meet the demands of skateboarding and roller skating. High-quality materials and precise assembly ensure optimal performance, providing both excellent speed and resistance to wear and impact. Both sides are sealed with a removable, frictionless rubber shield for easy cleaning. The bearings feature seven pre-lubricated steel balls with low-viscosity oil and stainless steel rings. Nut Abec-7 bearings guarantee speed, durability, and easy maintenance. Set of 8 bearings.
Data sheet
- Trucks Axles Diameter
- 8mm(Standard)
- Balls material
- Steel
- Built-In Spacers?
- Without Built-In Spacers
Powell Peralta Rat Bones 60mm, soft cruising, street, and bowl riding wheels. Re issue from 2005. 44mm width, 35mm contact patch, no core, off set hub. Set of four wheels
Data sheet
- Width
- 44mm
- Contact Patch
- 35mm
- Core Placement
- Off-set
- Lip profile
- Round Lip
- Wheel surface
- Smooth
- Diameter
- 60mm
- Durometer(s)
- 90A, 85A
- Disciplines
- Pumptrack, Cruiser, Bowl, Carving, Cruising
- Gap width between bearing seats
- 10mm(Skateboard/Longboard standard)
- Grip level
- 3/5