Deutsch
Español
Français
There are no more items in your cart
Santa Cruz Godzilla Kaiju Roskopp 10.125" Skateboard Complete
Old School Santa Cruz Rob Roskopp Skateboard 10.125" x 30.2" with redesigned graphics to celebrate the 70th anniversary of the movie Godzilla. Metallic blue colorway. Constructed with 7-ply epoxy-infused maple (enhances pop and durability)/ Cruz Missile II concave straight out of the late 1980s. WB 15.375". Set up with Independent 169mm trucks and Powell Peralta Rat Bones 60mm wheels.
Pack description
Old School Santa Cruz Rob Roskopp Skateboard 10.125" x 30.2" with redesigned graphics to celebrate the 70th anniversary of the movie Godzilla. Metallic blue colorway. Constructed with 7-ply epoxy-infused maple (enhances pop and durability)/ Cruz Missile II concave straight out of the late 1980s. WB 15.375". Set up with Independent 169mm trucks and Powell Peralta Rat Bones 60mm wheels.
About Santa Cruz
Santa Cruz was founded in 1973 in California and remains the oldest active skateboard brand. The history of Santa Cruz is closely tied to the evolution of skate and old school culture.
Rob Roskopp History
Rob Roskopp is an American skateboarder born in 1963 in Detroit. Rob landed in California in 1982 and turned pro for Santa Cruz Skateboards a few months later, remaining with them until 1991. During these years, Rob Roskopp traveled all over the world for demos and appeared in numerous videos. His favorite terrains are ramps and bowls. In the early 1990s, Rob briefly served as a manager for Sims Skateboards. In 1993, Rob co-founded the Santa Cruz Bicycle mountain bike company, which he then led until 2023.
Pack content
Special edition Godzilla collection deck. In celebration of the film's 70th anniversary, Santa Cruz revisits some of its most iconic skateboards, featuring reissues of original shapes and new, unique graphics. Kaiju Rob Roskopp deck 10.125" x 30.2". 7-ply epoxy-infused maple. Kicktail. Old School concave.
Mounting advices
For this Roskopp 10.125", we would recommend traditional geometry trucks with a width of 169mm (such as Independent 169). The choice of wheels depends on the usage, but a diameter between 56 and 60mm (consider using 1/4" riser pads) is a good match. Prefer a soft durometer (lower than 90A) if the usage is primarily cruising or pump track, or 95A and above for skatepark riding.
About Santa Cruz
Santa Cruz was founded in 1973 in California and remains the oldest active skateboard brand. The history of Santa Cruz is closely tied to the evolution of skate and old school culture.
Rob Roskopp History
Rob Roskopp is an American skateboarder born in 1963 in Detroit. Rob landed in California in 1982 and turned pro for Santa Cruz Skateboards a few months later, remaining with them until 1991. During these years, Rob Roskopp traveled all over the world for demos and appeared in numerous videos. His favorite terrains are ramps and bowls. In the early 1990s, Rob briefly served as a manager for Sims Skateboards. In 1993, Rob co-founded the Santa Cruz Bicycle mountain bike company, which he then led until 2023.
Data sheet
- Width
- 10.125"
- Construction
- 7-Plys Maple
- Wheelbase
- 15.375"
- Nose Lenght
- 3.6"
- Tail Lenght
- 7"
- Griptape
- Not Included
- Kicks
- Single Kick
- Shape
- Old School
- Year of Release
- 2024
- Lenght
- 30.2"
Jessup Black 10" x 33" Skateboard griptape sheet. Standard grit. Wide enough to fit on old school skateboards
Data sheet
- Main Color
- Black
Independent Skateboard Trucks 169mm. The Stage 11 includes a baseplate update while the hanger remains the same. 169mm works best on decks width 9" to 9.5"
The cavity holes in the baseplate have been filled, making it perfectly balanced and virtually indestructible! The pinch has been moved back a tad to add strength without changing the geometry that makes Indys turn so damn good.
Features
- Sold per truck
- Hanger Length: 162mm
- Axl Length: 8.9"
- BOARD RANGE:9.5"-10.00"
Data sheet
- Height
- 53.5mm
- Width
- 169mm(6.65")
- Construction
- Cast Aluminium
- Bushings Heights & Shapes
- Street Height 0.5", Short Street Height 0.4"
- Recommended Board Size
- 9" to 9.5"
- Trucks Axles Diameter
- 8mm(Standard)
- Axle width
- 9.125"
- Truck Hole Pattern
- Short 4 - 2.125" (New School), Length: 4 -2.5" (Old School)
Semi-flexible flat riser pads. Riser pads to raise the ground clearance of the skateboard to prevent wheelbite and isolate the deck from trucks to reduce vibration. 6-hole pads, compatible with New School and Old School drillins patterns. Available in 1/8" (3mm), 1/4" (6mm), 3/8" (9mm), & 1/2" (12mm). Sold in pairs
What screw size should I use?
Pads 1/8": 1" to 1.125" screws
Pads 1/4": 1.125" to 1.25" screws
Pads 3/8" and 1/2": 1.5" screws
Data sheet
- Truck Hole Pattern
- Short 4 - 2.125" (New School), Length: 4 -2.5" (Old School)
The Nut Abec-7 bearings are specially designed to meet the demands of skateboarding and roller skating. High-quality materials and precise assembly ensure optimal performance, providing both excellent speed and resistance to wear and impact. Both sides are sealed with a removable, frictionless rubber shield for easy cleaning. The bearings feature seven pre-lubricated steel balls with low-viscosity oil and stainless steel rings. Nut Abec-7 bearings guarantee speed, durability, and easy maintenance. Set of 8 bearings.
Data sheet
- Trucks Axles Diameter
- 8mm(Standard)
- Balls material
- Steel
- Built-In Spacers?
- Without Built-In Spacers
Powell Peralta Rat Bones 60mm, soft cruising, street, and bowl riding wheels. Re issue from 2005. 44mm width, 35mm contact patch, no core, off set hub. Set of four wheels
Data sheet
- Width
- 44mm
- Contact Patch
- 35mm
- Core Placement
- Off-set
- Lip profile
- Round Lip
- Wheel surface
- Smooth
- Diameter
- 60mm
- Durometer(s)
- 90A, 85A
- Disciplines
- Pumptrack, Cruiser, Bowl, Carving, Cruising
- Gap width between bearing seats
- 10mm(Skateboard/Longboard standard)
- Grip level
- 3/5
Standard skate bearings spacers. To be used with 8mm axles. Fit on most skateboard and longboard wheels. The spacers will help keeping the bearings in place into the wheels, improving your riding precision. Set of four spacers
Data sheet
- Gap width between bearing seats
- 10mm(Skateboard/Longboard standard)
- Trucks Axles Diameter
- 8mm(Standard)