Deutsch
Español
Français
There are no more items in your cart
Santa Cruz Salba Tiger 10.3" Neon Green Skateboard Complete
Old school Santa Cruz Salba Tiger skateboard in neon green with a matte finish. 7-ply epoxy-infused maple. 10.3" x 31.1". Wheelbase: 14.5"-15". Cruz Missile II concave straight from the 80s. Double kicktail. Engraved logo above the front truck. 2025 reissue, shape similar to the original 1990 model. Fully assembled and ready to ride. High-quality setup with Ace Classic 66 (171mm) trucks, Nut Abec-7 Classic bearings, and 56mm Slime Balls wheels.
Pack description
Old school Santa Cruz Salba Tiger skateboard in neon green with a matte finish. 7-ply epoxy-infused maple. 10.3" x 31.1". Wheelbase: 14.5"-15". Cruz Missile II concave straight from the 80s. Double kicktail. Engraved logo above the front truck. 2025 reissue, shape similar to the original 1990 model. Fully assembled and ready to ride. High-quality setup with Ace Classic 66 (171mm) trucks, Nut Abec-7 Classic bearings, and 56mm Slime Balls wheels.
About Santa Cruz
Santa Cruz was founded in 1973 in California and remains the oldest active skateboard brand. The history of Santa Cruz is closely tied to the evolution of skate and old school culture.
Pack content
Old School Santa Cruz Salba Tiger Skateboard Deck in neon green matte finish. 7-ply epoxy-infused maple. 10.3" x 31.1". Wheelbase 14.5"-15". Cruz Missile II concave straight from the 80s. Double kick. Engraved logo above the front truck. Reissue with a shape similar to the original. Perfect for collectors and/or for cruising, park, and old-school bowl riding.
Mounting advices
We would recommend traditional geometry trucks (such as Independent) with a width of 169mm. The choice of wheels depends on the usage, but a diameter between 56 and 60mm (consider using 1/4" riser pads) is a good match. Prefer a soft durometer (lower than 90A) if the usage is primarily cruising, or 95A and above for skatepark riding.
About Santa Cruz
Santa Cruz was founded in 1973 in California and remains the oldest active skateboard brand. The history of Santa Cruz is closely tied to the evolution of skate and old school culture.
Data sheet
- Width
- 10.3"
- Construction
- 7-Plys Maple
- Wheelbase
- 14.5" - 15"
- Nose Lenght
- 5.109"
- Tail Lenght
- 7.317"
- Griptape
- Not Included
- Disciplines
- Cruiser, Bowl
- Kicks
- Double Kicks
- Shape
- Old School
- Year of Release
- 2025
- Lenght
- 31.1"
Jessup Black 11" skateboard grip tape. Standard grits. Sold per 10cm
Data sheet
- Height
- 53mm
- Width
- 171mm(6.75")
- Construction
- Cast Aluminium
- Geometry
- Traditional
- Bushings Heights & Shapes
- Street Height 0.5", Short Street Height 0.4"
- Recommended Board Size
- 9" to 9.5", 9.6" to 10.5"
- Trucks Axles Diameter
- 8mm(Standard)
- Axle width
- 9.35"
- Axle width
- 9.35"
Semi-flexible flat riser pads. Riser pads to raise the ground clearance of the skateboard to prevent wheelbite and isolate the deck from trucks to reduce vibration. 6-hole pads, compatible with New School and Old School drillins patterns. Available in 1/8" (3mm), 1/4" (6mm), 3/8" (9mm), & 1/2" (12mm). Sold in pairs
What screw size should I use?
Pads 1/8": 1" to 1.125" screws
Pads 1/4": 1.125" to 1.25" screws
Pads 3/8" and 1/2": 1.5" screws
Data sheet
- Truck Hole Pattern
- Short 4 - 2.125" (New School), Length: 4 -2.5" (Old School)
The Nut Abec-7 bearings are specially designed to meet the demands of skateboarding and roller skating. High-quality materials and precise assembly ensure optimal performance, providing both excellent speed and resistance to wear and impact. Both sides are sealed with a removable, frictionless rubber shield for easy cleaning. The bearings feature seven pre-lubricated steel balls with low-viscosity oil and stainless steel rings. Nut Abec-7 bearings guarantee speed, durability, and easy maintenance. Set of 8 bearings.
Data sheet
- Trucks Axles Diameter
- 8mm(Standard)
- Balls material
- Steel
- Built-In Spacers?
- Without Built-In Spacers
Slime Balls Hairballs 50-50 56mm 95A skateboard wheels. Size Especially suited for skating streets, bowls, and vert. High Performance 95A urethane. Hairballs have a hard edge conical shape for firm lock in and wide 22mm riding surface for consistent speed and slide. . Easier sliding thanks to the stone ground finish and rounded lips. Set of 4 Wheels
Data sheet
- Width
- 37mm
- Contact Patch
- 22mm
- Core Placement
- Center-set
- Wheel surface
- Stone-ground
- Diameter
- 56mm
- Durometer(s)
- 95A
- Gap width between bearing seats
- 10mm(Skateboard/Longboard standard)