<p>Harfang snowskate bungee leash. size 4.6" un-streched / 7.6" stretched. The leash is an essential safety accessory allowing to connect the rider to his board, and thus avoid any collision resulting from a board hurting alone. The Harfang leash is the safest of its kind, as it would no break from cold and the strap would resist to the cuts from ski edges passing on it.</p>

<p>The Buckshot is a true all-mountain shred stick. It handles everything from ice, to groomers, to a couple feet of pow. If you’re not super park focused, and want to be able to skate your whole mountain, this is the snowskate you’re looking for. 7-ply 36" x 9.5" Top deck with high concave and steep kicks. This deck is covered with EVA Foam Grip. 126cm sub deck. The sub deck has a Polar core with Triaxial Fiberglass. It is fully wrap with stainless steel edges and has urethane siewalls. 5 inserts setup options. Trucks 2" high with 1/2" risers. Leash included.</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/J8oBgX6vVv8" title="YouTube video player" frameborder="0"></iframe></p>

<p>The Hovland Five-Oh Snowskate is made for flip tricks, jumps, rails, ramps and boxes in the park, but will get you around the mountain as well. This sub-deck is 92cm long with a sintered base. It has a Polar core, biaxle &amp; triaxle fiberglass, urethane sidewalls, fully wrapped stainless steel edges, 3 insert options. <strong>Sub deck only</strong>. To build a complete snowskate from this sub deck, you will need to had trucks(compatible with Harfang), Top deck, and a leash.</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/TSXf3vsDysg" title="YouTube video player" frameborder="0"></iframe></p>

<p>Hovland Buckshot 126cm Sub deck. Polar core with Triaxial Fiberglass. It is fully wrap with stainless steel edges and has urethane siewalls. 5 inserts setup options(matching with Bear and Harfang Trucks). The Buckshot handles everything from ice, to groomers, to a couple feet of pow. If you’re not super park focused, and want to be able to skate your whole mountain, this is the snowskate you’re looking for. Ski width: Nose 19.5cm/ waist 12.5cm / Tail 13.4cm</p> <p></p>

<p>Harfang hardware to assemble snowskate trucks with the top deck. M6(metric 6mm) stainless steel bolts with philips flat heads. This is the standard size used for snowskate mountings. If you are using a skateboard deck as the top deck, you will need the widen the mouting holes to 6mm. use lenght size 25mm if you do not use riser pads, or 35mm if you are using 1/2" riser pad. <strong>Set of 4 bolts with nuts</strong></p>

<p>The Landyachtz Hammer Foam Grip Tape makes your board even more comfortable! A layer of soft foam is underneath the gritty top layer adds comfy to your longboard ride. This grip pack can also be used to make awesome 3D concaves! Add the grip first, then apply a Vicious or other super sticky grip to it to create a raised effect that'll help lock in feet. <strong>2 sheets 11"x11"</strong></p>

<p>Harfang EVA Foam Grip for snowskates. 10" x 37" sheet. Self-adhesive backing.</p>

<p>Harfang Tall Claw-XT snowskate trucks(extended version of the Tall Claw trucks). 1.625″ top and bottom hole pattern. Powder coated steel top part, UHMW bottom part. Flipping the base allows for flex adjustment of the sub-ski. Allow to adjust the position of the top deck from front to back. The Tall height gives more leverage for carving and will let you ride on steeper hills. Fit most Sub-deck brands: Harfang, Hovland, LY Snow(Aka Landyachtz), Boyd Hill,...). <strong>Set of 2 trucks with Sub-ski mounting hardware included (4 stainless steel M6x25 hexagonal head screws). Top-deck hardware not included. Made in Canada</strong></p> <p><strong></strong></p>

<p>Harfang snowskate 1/2" riser pads to place between the trucks and the top deck. Using riser pads enhance the leverage for more agility, and let you ride on steeper hills. size 1.375″ x 2.625″ x 1/2″ thickness. Hole pattern : 1.625″(matching with M6 hardware). Made in Canada. <strong>Set of 2 pads</strong></p>

<p>Harfang EVA Foam Grip for snowskates. 10" x 37" sheet. Self-adhesive backing.</p>

<p>The Ram is wide and stable, but also soft and poppy. It is Hovland's most versatile snowskate made to rally the whole mountain from the park to shallow pow. 105cm sub deck. Polar core with Triaxial Fiberglass. It is fully wrap with stainless steel edges and has urethane siewalls. 3 inserts setup options. Compatible with Harfang trucks.</p> <p></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/J8oBgX6vVv8" title="YouTube video player" frameborder="0"></iframe></p>

<p>Harfang hardware to assemble snowskate trucks with the top deck. M6(metric 6mm) stainless steel bolts with philips flat heads. This is the standard size used for snowskate mountings. If you are using a skateboard deck as the top deck, you will need the widen the mouting holes to 6mm. use lenght size 25mm if you do not use riser pads, or 35mm if you are using 1/2" riser pad. <strong>Set of 4 bolts with nuts</strong></p>

<p>Harfang snowskate bungee leash. size 4.6" un-streched / 7.6" stretched. The leash is an essential safety accessory allowing to connect the rider to his board, and thus avoid any collision resulting from a board hurting alone. The Harfang leash is the safest of its kind, as it would no break from cold and the strap would resist to the cuts from ski edges passing on it.</p>

<p>Harfang aluminium 3.5" adapter plates. Will let you install Harfang trucks on any sub-ski using 3.5" hole pattern(Lib Tech). 1.625″ threaded holes and 3.5″ mounting holes. Included : 2 plates + mounting hardware (2 stainless steel M6x12 hexagonal head screw)</p>