Harfang Sub Ski Assembly Hardware

<p>Harfang Claw Snowskate trucks. Standard height. fiberglass reinforced plastic base plate, single pivot point technology, powder coated steel top part. Fit most snowskate sub-decks such as: Harfang, Hovland, Landyachtz, Boyd Hill... If you are looking for more leverage for freeriding and/or steeper hills, we would recommand to add an additional  1/2" riser pad. Made in Canada. <strong>Set of 2 Trucks with sub-deck mounting hardware(Top deck mounting hardware not included)</strong></p>

<p>Hovland wider flatdeck snowskate at 9.5". The Club Flatdeck has a directional shape and is great for big tricks in parks or on the snowy streets. Size 9.5" x 37"; Blended radial nose &amp; tail for pop, feel &amp; speed. 7-Ply maple. Custom designed seven groove rail locking pattern; EVA foam grip; Custom designed EVA foam concave</p>

<p>Harfang Dual-decks type allround snowskate with Native graphic. 7 Plys maple 35" x 9.375" top deck mounted on a 43"(109.5cm) twin tip sub deck width 15.3cm x 12.3cm x 15.3cm. This Harfang snowskate is easy to ride, no matter if you are a beginner or a pro. You will enjoy carving on the slopes, doing tricks at the park. The board is set with Harfang Claw trucks and come with a leash for your(and other surounndings users) safety. The top deck is covered with EVA foam. For Logistical reasons, the snowskate is delivred as a kit with mounting screws. Assembly is very simple and only requires a screwdrider and a N°10 Wrench</p> <p></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/aolafAypEW0" title="YouTube video player" frameborder="0"></iframe></p>

<p>Hovland Bubba is a bi-level snowskate focused on big fresh snow powder days conditions. The long 151cm &amp; wide ski offers very good flotation on fresh snow. In terms of feeling, we are very close from snowboarding. Polar core and tri-axial fiber sub desck with 6 inserts options, and is mounted on a 37" x 9.75" double Kicks maple 7-ply top deck with EVA foam grip. Harfang Claw Trucks. <strong>Leash included</strong></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/8XFuP3LxPDo?si=Wm-rnzzlXSDNVULI" title="YouTube video player" frameborder="0"></iframe></p>

<p>The Ram Hawk is wide and stable, but also soft and poppy. It is Hovland's most versatile snowskate made to rally the whole mountain from the park to shallow pow. 105cm sub deck. Polar core with Triaxial Fiberglass. It is fully wrap with stainless steel edges and has urethane siewalls. 3 inserts setup options. Compatible with Harfang trucks. Insert placements are matching with any Hovland top decks</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/bmKspscSR4o?si=-hhH5zEGLV2LZcK2" title="YouTube video player" frameborder="0"></iframe></p>

<p>The Hovland Five-Oh Snowskate is made for flip tricks, jumps, rails, ramps and boxes in the park, but will get you around the mountain as well. Top deck is made of 7-ply maple + EVA Foam grip, size 9.5" x 35.5", deep concave, steep kicks, 3 mounting options. The sib-deck is 92cm long with a sintered base. Sub-deck has a Polar core, biaxle &amp; triaxle fiberglass, urethane sidewalls, fully wrapped stainless steel edges, 3 insert options. Harfang 2" tall trucks. Leash included. For Logistical reasons, the snowskate is delivred as a kit with mounting screws. Assembly is very simple and only requires a screwdrider and a N°10 Wrench</p> <p></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/TSXf3vsDysg" title="YouTube video player" frameborder="0"></iframe></p>

<p>GrillAll Tundra Grip - Studded Grip sheet for Snowskate to adhere (self-adhesive side) directly onto the deck or on top of the original EVA foam grip. The Tundra grip is made of flexible material with hard studs. Easily cut with scissors. Plate of 5" x 24" (12.5 x 60cm) to be cut and scattered on the board. Sufficient for 1 board. Thanks to Tundra grip, you won't slide off your board anymore and will gain better control of your snowskate.</p>

<p>Harfang Tall Claw-XT snowskate trucks(extended version of the Tall Claw trucks). 1.625″ top and bottom hole pattern. Powder coated steel top part, UHMW bottom part. Flipping the base allows for flex adjustment of the sub-ski. Allow to adjust the position of the top deck from front to back. The Tall height gives more leverage for carving and will let you ride on steeper hills. Fit most Sub-deck brands: Harfang, Hovland, LY Snow(Aka Landyachtz), Boyd Hill,...). <strong>Set of 2 trucks with Sub-ski mounting hardware included (4 stainless steel M6x25 hexagonal head screws). Top-deck hardware not included. Made in Canada</strong></p> <p></p>

<p>Harfang hardware to assemble snowskate trucks with the top deck. M6(metric 6mm) stainless steel bolts with philips flat heads. This is the standard size used for snowskate mountings. If you are using a skateboard deck as the top deck, you will need the widen the mouting holes to 6mm. use lenght size 25mm if you do not use riser pads, or 35mm if you are using 1/2" riser pad. <strong>Set of 4 bolts with nuts</strong></p>

<p>GrillAll Tundra Grip - Studded Grip sheet for Snowskate to adhere (self-adhesive side) directly onto the deck or on top of the original EVA foam grip. The Tundra grip is made of flexible material with hard studs. Easily cut with scissors. Plate of 5" x 24" (12.5 x 60cm) to be cut and scattered on the board. Sufficient for 1 board. Thanks to Tundra grip, you won't slide off your board anymore and will gain better control of your snowskate.</p>

<p>Harfang snowskate bungee leash. size 4.6" un-streched / 7.6" stretched. The leash is an essential safety accessory allowing to connect the rider to his board, and thus avoid any collision resulting from a board hurting alone. The Harfang leash is the safest of its kind, as it would no break from cold and the strap would resist to the cuts from ski edges passing on it.</p>

<p>Harfang Tall Claw-XT snowskate trucks(extended version of the Tall Claw trucks). 1.625″ top and bottom hole pattern. Powder coated steel top part, UHMW bottom part. Flipping the base allows for flex adjustment of the sub-ski. Allow to adjust the position of the top deck from front to back. The Tall height gives more leverage for carving and will let you ride on steeper hills. Fit most Sub-deck brands: Harfang, Hovland, LY Snow(Aka Landyachtz), Boyd Hill,...). <strong>Set of 2 trucks with Sub-ski mounting hardware included (4 stainless steel M6x25 hexagonal head screws). Top-deck hardware not included. Made in Canada</strong></p> <p></p>

<p>Hovland Buckshot 126cm Sub deck. Polar core with Triaxial Fiberglass. It is fully wrap with stainless steel edges and has urethane siewalls. 5 inserts setup options(matching with Bear and Harfang Trucks). The Buckshot handles everything from ice, to groomers, to a couple feet of pow. If you’re not super park focused, and want to be able to skate your whole mountain, this is the snowskate you’re looking for. Ski width: Nose 19.5cm/ waist 12.5cm / Tail 13.4cm</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/hSPnWit8CQc?si=EWywqmugUmA4Nnr9" title="YouTube video player" frameborder="0"></iframe></p>

<p>Harfang Claw Snowskate trucks. Standard height. fiberglass reinforced plastic base plate, single pivot point technology, powder coated steel top part. Fit most snowskate sub-decks such as: Harfang, Hovland, Landyachtz, Boyd Hill... If you are looking for more leverage for freeriding and/or steeper hills, we would recommand to add an additional  1/2" riser pad. Made in Canada. <strong>Set of 2 Trucks with sub-deck mounting hardware(Top deck mounting hardware not included)</strong></p>

<p>Harfang snowskate 1/2" riser pads to place between the trucks and the top deck. Using riser pads enhance the leverage for more agility, and let you ride on steeper hills. size 1.375″ x 2.625″ x 1/2″ thickness. Hole pattern : 1.625″(matching with M6 hardware). Made in Canada. <strong>Set of 2 pads</strong></p>