Hovland Five-Oh Monster Snowskate - Sub Deck

<p>Hovland Ram snowskate top deck. Hawk Graphics. 7 ply maple deck covered with EVA foam grip. "Wheelbases" placements are matching with the inserts of all Hovland sub decks (Buckshot, Bubba, Ram, Five-Oh). The pronounced kicks offer good stalling points for the feet while allowing you to ollie and place tricks. The tail is drilled to allow easy attachment of a leash.</p>

<p>Hovland narrowest flatdeck snowskate at 8.5", City Slicker is ideal for technical tricks and tight lines. Size 8.5" x 35.5". 7-Ply Maple. Blended radial nose &amp; tail for pop, feel &amp; speed. Custom designed seven groove rail locking pattern; EVA foam grip; Custom designed EVA foam concave</p>

<p>The Hovland Five-Oh Snowskate is made for flip tricks, jumps, rails, ramps and boxes in the park, but will get you around the mountain as well. Top deck is made of 7-ply maple + EVA Foam grip, size 9.5" x 35.5", deep concave, steep kicks, 3 mounting options. The sib-deck is 92cm long with a sintered base. Sub-deck has a Polar core, biaxle &amp; triaxle fiberglass, urethane sidewalls, fully wrapped stainless steel edges, 3 insert options. Harfang 2" tall trucks. Leash included. For Logistical reasons, the snowskate is delivred as a kit with mounting screws. Assembly is very simple and only requires a screwdrider and a N°10 Wrench</p> <p></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/TSXf3vsDysg" title="YouTube video player" frameborder="0"></iframe></p>

<p>Harfang Tall Claw-XT snowskate trucks(extended version of the Tall Claw trucks). 1.625″ top and bottom hole pattern. Powder coated steel top part, UHMW bottom part. Flipping the base allows for flex adjustment of the sub-ski. Allow to adjust the position of the top deck from front to back. The Tall height gives more leverage for carving and will let you ride on steeper hills. Fit most Sub-deck brands: Harfang, Hovland, LY Snow(Aka Landyachtz), Boyd Hill,...). <strong>Set of 2 trucks with Sub-ski mounting hardware included (4 stainless steel M6x25 hexagonal head screws). Top-deck hardware not included. Made in Canada</strong></p> <p></p>

<p>GrillAll Tundra Grip - Studded Grip sheet for Snowskate to adhere (self-adhesive side) directly onto the deck or on top of the original EVA foam grip. The Tundra grip is made of flexible material with hard studs. Easily cut with scissors. Plate of 5" x 24" (12.5 x 60cm) to be cut and scattered on the board. Sufficient for 1 board. Thanks to Tundra grip, you won't slide off your board anymore and will gain better control of your snowskate.</p>

<p>The Ram Hawk is wide and stable, but also soft and poppy. It is Hovland's most versatile snowskate made to rally the whole mountain from the park to shallow pow. 105cm sub deck. Polar core with Triaxial Fiberglass. It is fully wrap with stainless steel edges and has urethane siewalls. 3 inserts setup options. Compatible with Harfang trucks. Insert placements are matching with any Hovland top decks</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/bmKspscSR4o?si=-hhH5zEGLV2LZcK2" title="YouTube video player" frameborder="0"></iframe></p>

<p>Harfang sub-ski assembly hardware. Used to fasten the snowskate trucks to the sub-deck. Full Thread, Stainless steel A2. Teflon thread lock. Use M6 x 16mm (with included washers) for actual Harfang Trucks, or M6 x 25mm (without washers) for older versions. Set of 4 bolts(for to trucks). Use wrench tool N°10</p>

<p>Injection molded polyurethane studded ‘Prism’ stomp pad. Designed and made in Canada by Harfang Solutions for the harshest environments and weather conditions. The studs will enhance your snowskating with added grip and traction under your feet for maximum control and trick consistency. Easy to cut and stick directly onto your snowskate’s foam grip. Follow our recommeded setup or get creative and customize to your own riding style. Includes two 5in x 9in sheets with adhesive backing for a total of 90 studs.</p>

<p>Harfang hardware to assemble snowskate trucks with the top deck. M6(metric 6mm) stainless steel bolts with philips flat heads. This is the standard size used for snowskate mountings. If you are using a skateboard deck as the top deck, you will need the widen the mouting holes to 6mm. use lenght size 25mm if you do not use riser pads, or 35mm if you are using 1/2" riser pad. <strong>Set of 4 bolts with nuts</strong></p>

<p>Harfang EVA Foam Grip for snowskates. 10" x 37" sheet. Self-adhesive backing.</p>

<p>Harfang Claw-XT snowskate trucks(extended version of the Claw trucks). 1.625″ top and bottom hole pattern. Powder coated steel top part, UHMW bottom part. Flipping the base allows for flex adjustment of the sub-ski. Allow to adjust the position of the top deck from front to back. Fit most Sub-deck brands: Harfang, Hovland, LY Snow(Aka Landyachtz), Boyd Hill,...) <strong>Set of 2 trucks with Sub-ski hardware included (4 stainless steel M6x25 hexagonal head screws). Top-deck hardware not included. Made in Canada</strong></p>