Harfang Claw Snowskate Trucks (Set)

<p>The Hovland Five-Oh Snowskate is made for flip tricks, jumps, rails, ramps and boxes in the park, but will get you around the mountain as well. This sub-deck is 92cm long with a sintered base. It has a Polar core, biaxle &amp; triaxle fiberglass, urethane sidewalls, fully wrapped stainless steel edges, 3 insert options. <strong>Sub deck only</strong>. To build a complete snowskate from this sub deck, you will need to had trucks(compatible with Harfang), Top deck, and a leash.</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/TSXf3vsDysg" title="YouTube video player" frameborder="0"></iframe></p>

<p>The <strong>Buckshot</strong> Newspaper graphics is a true all-mountain Bi-level Snwskate. It handles everything from ice, to groomers, to a couple feet of pow. If you’re not super park focused, and want to be able to skate your whole mountain, this is the snowskate you’re looking for. 7-ply 36" x 9.5" Top deck with high concave and steep kicks. This deck is covered with EVA Foam Grip. 126cm sub deck. The sub deck has a Polar core with Triaxial Fiberglass. It is fully wrap with stainless steel edges and has urethane siewalls. 5 inserts setup options. Trucks 2" high with 1/2" risers. Leash included.</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/hSPnWit8CQc?si=EWywqmugUmA4Nnr9" title="YouTube video player" frameborder="0"></iframe></p>

<p>Snowskate Ambition Pro model Josh Oakes 8.5" x 32.5". 7-ply epoxy-infused maple deck. 7-groove CPE base that is both fast and scratch resistant. The Ambitions pro models are distinguished from the Team series by a full bottom graphic, and by an addition of concave integrated into the EVA foam grip on the top of the deck. Flat deck type snowskates allow you to do the same tricks as in skateboarding, and use the streets and snowy hills as a playground. Made in Canada</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/_5BeBFr3-y4" title="YouTube video player" frameborder="0"></iframe></p>

<p>Harfang sub-ski assembly hardware. Used to fasten the snowskate trucks to the sub-deck. Full Thread, Stainless steel A2. Teflon thread lock. Use M6 x 16mm (with included washers) for actual Harfang Trucks, or M6 x 25mm (without washers) for older versions. Set of 4 bolts(for to trucks). Use wrench tool N°10</p>

<p>Injection molded polyurethane studded ‘Prism’ stomp pad. Designed and made in Canada by Harfang Solutions for the harshest environments and weather conditions. The studs will enhance your snowskating with added grip and traction under your feet for maximum control and trick consistency. Easy to cut and stick directly onto your snowskate’s foam grip. Follow our recommeded setup or get creative and customize to your own riding style. Includes two 5in x 9in sheets with adhesive backing for a total of 90 studs.</p>

<p>Harfang EVA Foam Grip for snowskates. 10" x 37" sheet. Self-adhesive backing.</p>

<p>Hovland Five-Oh Monster 35.5" x 9.5" snowskate top deck. 7 ply maple and covered with EVA foam grip. "Wheelbases" placements are matching with the inserts of all Hovland sub decks (Buckshot, Bubba, Ram, Five-Oh). The pronounced kicks offer good stalling points for the feet while allowing you to ollie and place tricks. The kicktail is drilled to allow easy attachment of a leash.</p>

<p>The Hovland Five-Oh Snowskate is made for flip tricks, jumps, rails, ramps and boxes in the park, but will get you around the mountain as well. Top deck is made of 7-ply maple + EVA Foam grip, size 9.5" x 35.5", deep concave, steep kicks, 3 mounting options. The sib-deck is 92cm long with a sintered base. Sub-deck has a Polar core, biaxle &amp; triaxle fiberglass, urethane sidewalls, fully wrapped stainless steel edges, 3 insert options. Harfang 2" tall trucks. Leash included. For Logistical reasons, the snowskate is delivred as a kit with mounting screws. Assembly is very simple and only requires a screwdrider and a N°10 Wrench</p> <p></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/TSXf3vsDysg" title="YouTube video player" frameborder="0"></iframe></p>

<p>The Ram Hawk is wide and stable, but also soft and poppy. It is Hovland's most versatile snowskate made to rally the whole mountain from the park to shallow pow. 105cm sub deck. Polar core with Triaxial Fiberglass. It is fully wrap with stainless steel edges and has urethane siewalls. 3 inserts setup options. Compatible with Harfang trucks. Insert placements are matching with any Hovland top decks</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/bmKspscSR4o?si=-hhH5zEGLV2LZcK2" title="YouTube video player" frameborder="0"></iframe></p>

<p>GrillAll Tundra Grip - Studded Grip sheet for Snowskate to adhere (self-adhesive side) directly onto the deck or on top of the original EVA foam grip. The Tundra grip is made of flexible material with hard studs. Easily cut with scissors. Plate of 5" x 24" (12.5 x 60cm) to be cut and scattered on the board. Sufficient for 1 board. Thanks to Tundra grip, you won't slide off your board anymore and will gain better control of your snowskate.</p>

<p>Harfang snowskate 1/2" riser pads to place between the trucks and the top deck. Using riser pads enhance the leverage for more agility, and let you ride on steeper hills. size 1.375″ x 2.625″ x 1/2″ thickness. Hole pattern : 1.625″(matching with M6 hardware). Made in Canada. <strong>Set of 2 pads</strong></p>

<p>Harfang hardware to assemble snowskate trucks with the top deck. M6(metric 6mm) stainless steel bolts with philips flat heads. This is the standard size used for snowskate mountings. If you are using a skateboard deck as the top deck, you will need the widen the mouting holes to 6mm. use lenght size 25mm if you do not use riser pads, or 35mm if you are using 1/2" riser pad. <strong>Set of 4 bolts with nuts</strong></p>

<p>Harfang sub-ski assembly hardware. Used to fasten the snowskate trucks to the sub-deck. Full Thread, Stainless steel A2. Teflon thread lock. Use M6 x 16mm (with included washers) for actual Harfang Trucks, or M6 x 25mm (without washers) for older versions. Set of 4 bolts(for to trucks). Use wrench tool N°10</p>

<p>Leash Hoveland Surf style col with a carabiner so you can esealy link the leash to your belt. The leash is an essential safety accessoriy allowing to connect the rider to his board, and thus avoid any collision resulting from a board hurting alone.</p>