Skateboard T-Tool
<p>Skateboard T- Tool. All in one tool to tune your skateboard. 9/16 inch kingpin socket; 1/2 inch axle nut socket; 3/8 inch hardware socket; Phillips screwdriver; Allen wrench</p>
FREE SHIPPING from 70€ France & Belgium / 190€ EU & Swiss
Showing 1-13 of 13 item(s)
MOB Grip Tape Cleaner
<p>MOB Grip tape cleaner</p> <p></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/FNWyxl_VSlE" frameborder="0"></iframe></p>
Bones Bearing tool
<p>Bones Bearings tool acts as both a bearing press and a puller as well. It works with 8mm bearing and for the 90% of people not using spacers in their wheels. It is designed to press the bearings putting only force on the inner race so you wont dent your shields. Ball detent technology and small enough to fit in your pocket and make it your keychain.</p>
Venom Torque Block
<p>The torque block foam wedge piece is designed to be used on the back of your downhill board as support for your rear foot when tucking, cornering, and sliding. Size 11" x 4.5"</p> <p></p>
Price €16.95
Carver Skateboard Tool
<p>This universal pocket tool measures in at under 2½" in length, so it's easy to bring along on a session for on-the-fly adjusting. Made of tool grade stainless steel, it won't rust, break or wear out, guaranteed. The Allen key snaps on with a powerful neodymium magnet.</p>
Skateboard Y-Tool
<p>Skateboard Y Multi-tool. Fearturing: 3/8" Socket for Hardware Bolts; 1/2" Socket for Wheel Axle; 9/16" Socket for Truck Kingpin; Self Aligning Theader for Stripped Axles; Removable "Y" Piece fir Bolt Heads; "Y" Piece Includes 1/8" Allen and Phillips</p>
Price €14.95
Paris Skate tool
<p>Paris Multi skate tool is compact and easy to toss in a pocket while skating, no sharp points exposed to impale you in the off chance you take a spill and happen to land on wherever you have it stashed. Deep sockets to fit on the longest of kingpins and mounting hardware, Designed by skaters, for skaters!</p>
Nose Guards for Longboards(Set)
<p>This nose guards are very easy to set and will prevent nose/tail cracks. Set of 2 nose/tail guards. No tools, screws, or glue required. Would fits most longboards</p>
Price €14.95
Skater Trainer 2.0
<p>The Skater Trainers 2.0 help learn new tricks faster. Stops the wheels from rolling while you learn tricks. Easy to instal. Fits almost any skateboard wheels from diameter 48mm to 65mm. Made for beginner skaters; younger skaters who want to master tricks faster; people who want to practice indoors (in bad weather or late at night); Older guys who want to re-learn their old moves; someone who is struggling with a trick they just can't get; guys who want to mess around on their boards at work. <strong>Set of 4</strong></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/s_qLdhMElLk" title="YouTube video player" frameborder="0"></iframe></p>
Price €29.95
Independent Axle Rethreader Tool + Nuts
<p>Independent Genuine Parts Axle Rethreaders feature a pilot shaft that makes it super easy to properly place on and rethread your trucks axles. Package comes with 1 pilot shaft rethreader, 4 fresh axle nuts, and a Genuine Parts sticker.</p>
Price €9.00
- Out-of-Stock. Contact us
- Out-of-Stock. Contact us
Bones bearing cleaner kit
<p>Bones bearing cleaner kit is designed to clean up to 8 bearings at a time. They are separated on a pin by 7 spacers to insure good flow of the cleaning agent throughout all the bearings and allowing more room for the debris to work it's way out. Cleanning agent and bearings are not include in the pack. We recommend using acetone or specific formula such as Skanunu.</p>
- Out-of-Stock. Contact us
- Out-of-Stock. Contact us
Roll Line Bearings Press
<p>Roll Line Bearings press is an easy, fast, and safe way to set or extract bearings in you roller or skateboard wheels. This press can be use with 7mm(627), 8mm(608), or 10mm bearings. Max size of the Wheel to set: 68mm</p>
Price €70.95
- Out-of-Stock. Contact us
- Out-of-Stock. Contact us
Urethane Burners Cyanoacrylate Glue - 20g
<p>Urethane Burners cyanoacrylate glue is the best and fastest solution to glue your foot brake soles or anything else. You can glue your soles, your gloves, fix your grip tape, glue plastic, rubber, metal… Oh! And it has been designed to resist high temperatures, so don’t worry about the scorching summer asphalt. Easy to use. Warning: Avoid any contact with the skin. Do not eat. 20g bottle (enough to glue 2 sets of soles)</p>
Price €9.95
New products
- -€4.90
- New
- Pack
- -€4.90
- New
- Pack
Antik Skyhawk V2 Black Hybrid Set Roller Skates
<p>The Antik Skyhawk V2 Roller derby set with hybrid Wheels (suitable for more types of surfaces). Suitable for beginners to advanced skaters & ideal for skaters seeking versatility: skatepark, roller derby, cruising, or dancing in the streets. The comfortable high-top Skyhawk boot is made of synthetic leather with reinforced toe caps that resist abrasion. Shock-absorbing EVA heels. For this V2 version, the ankle area has been slightly redesigned to maximize comfort. The tongue features lace loops to keep it in place. It is assembled with Powerdyne Thrust V2 nylon plates, Abec 5 Bearings, Radar Villain 59mmm x 38mm 84A Hybrid Wheels, and the excellent Gumballs toe stops.</p>
Regular price €334.85Price €329.95
- New
- New
S-One Helmet Wide Terry Cloth Sizing Liners
<p>Replace your S1 Lifer Helmet Sizing Liners with some fresh, durable, washable and sweat absorbing Terry Liners. The S1 terry cloth is sewn onto the liner, sealed at the ends and covers the front and back of the liner making it more durable allowing it to not break down as fast as the standard Lifer sizing liners. Wide design for more more sweat absorbing coverage.</p>
- New
