tall longboard bushings

Tall Bushings (Ronin, Rogue,..)

longboard bushings buyers guide

Tall bushings are 19mm high(0.770")  and are compatible with a few and specific longboard trucks such as Ronin, Rogue, Bear...

longboard bushings buyers guide

Tall bushings are 19mm high(0.770")  and are compatible with a few and specific longboard trucks such as Ronin, Rogue, Bear Kodiaks, Abec11 Liquid


Filters

Brand

Durometer

Bushings Heights & Shapes

product name

      RipTide Tall Barrels APS Longboard Bushings (For one truck)

      <p>Tall Barrels bushings specialy made for Ronin trucks (Cast and Billet). The barrel shape ensure maximum stability for speed and downhill use. APS Urethane. Fit Ronin Trucks, Arsenal Trucks, Bear Kodiak, Rogue,... <strong>Set of two bushings (For one single truck)</strong></p>
      Price €10.95
      product name

          Venom Tall Barrels HPF Longboard bushings

          <p>Venom Tall Barrel HPF bushings are made to fit on Ronin, Rogue, Kodiak, and any other trucks needed "Tall" type bushings. HPF(High Performence Formula) is especialy good for downhill riding, as it as less rebound than the HPF formula.  <strong>Set of two bushings (For one truck)</strong></p>
          Price €14.95
          product name

              Venom Tall Barrels SHR Longboard bushings

              <p>Venom SHR Ronin specific. Made out of Ultra High Rebound Formula, those Venom bushings are a great update to any models of Ronin Trucks. Tall barrels shape. <strong>Set of two bushings (For one truck)</strong></p>
              Price €15.95
              product name

                  Riptide Tall Cones APS Longboard Bushings (For one truck)

                  <p>Tall Cones bushings would fitspecifics trucks such as Ronin, Rogue, Arsenal, Bear Kodiak,... The cone shape would let you turn deeper and works great for carving. APS is a lively and responsive, high-performance urethane with just the right amount of rebound. Very linear in response so you can control the bushing instead of the other way around. <strong>Set of two bushings (For one single truck)</strong></p>
                  Price €10.95
                  product name

                      RipTide Tall Fat Cones APS Longboard Bushings

                      <p>RipTide Tall Fat Cones has the circumference of a barrel where the bushings sit on the truck, and then gradually widens to the size of a chubby where the washers sit. This gives you the ability to get more lean than a chubby, while giving you progressive resistance the more you turn. APS Urethane. Tall bushings are specificly made for Ronin, Rogue, Bear Kodiak trucks. <strong>Set of two bushings</strong></p>
                      Price €13.95
                      product name

                          Seismic Tall Barrels Defcon Bushings (2 Pces)

                          <p>Seismic Tall Barrels precision fit longboard Bushings made from Defcon high rebound Formula. Made from the same compound used on the world fastest wheels. Seismic Barrel bushings are a best for downhill &amp; freeriding. You will enjoy: Deeper lean and truer more fluid steering; Smoother, more linear resistance profile; Very calm &amp; predicatble at speed; Smooth &amp; controlled return to center. Fit many longboard precision race trucks: Rogue, Ronin, Zealous, Skoa, Valkirie, Don't Trip,... <strong>Set of 2 bushings</strong></p> <p></p>
                          Price €16.95
                          product name

                              Venom Tall Keg HPF Longboard Bushings

                              <p>Venom Tall Keg HPF shape is designed to give more progressive resistance and rebound than a barrel, but without the hard stop of a normal stepped bushing. Ideal for use on the board-side, especially if you want to go to a softer setup without losing stability. Just think of it as a barrel, but with that thicky-thicc-thicc as Nelly would say. <strong>Set of two</strong></p>
                              Price €14.95
                              product name

                                  Riptide Tall Barrels KranK Longboard Bushings

                                  <p>Riptide Krank Tall barrel bushings. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! Those cushions are specific taller size, made to fit the following trucks: Ronin, Rogue, Arsenal, Bear Kodiak,.. <strong>Set of 2 bushings(for one truck)</strong></p>
                                  Price €13.95
                                  product name

                                      Riptide Tall Cones Krank Longboard Bushings

                                      <p>Tall Cones bushings would fitspecifics trucks such as Ronin, Rogue, Arsenal, Bear Kodiak,... The cone shape would let you turn deeper and works great for carving. Riptide highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the kingpin nut!. <strong>Set of two bushings (For one single truck)</strong></p>
                                      Price €13.95
                                      product name

                                          RipTide WFB Tall Barrels Longboard Bushings

                                          <p>Riptide bushings for Tall format longboard trucks (Ronin, Rogues, Bear Kodiak,...). The barrel shape is the most stable and is the most popular in downhill and freeride longboarding. The WFB rubber (world fastest Bushings) contains a lubricating component in its formula, which gives it better responsiveness and ultra-smooth behavior. <strong>Sold as a pair (For one truck)</strong></p>
                                          Price €13.95
                                          product name

                                              Riptide Tall Fat Cones Krank Longboard Bushings

                                              <p>Riptide Tall Fat Cones has the circumference of a barrel where the bushings sit on the truck, and then gradually widens to the size of a chubby where the washers sit. This gives you the ability to get more lean than a chubby, while giving you progressive resistance the more you turn. <span>Krank formula is Riptide's highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut</span>. Tall bushings are specificly made for race trucks such as Ronin, Rogue, Don't Trip, Bear Kodiak trucks. <strong>Set of two bushings</strong></p>
                                              Price €18.50
                                              product name
                                              • Out-of-Stock. Contact us
                                              • Out-of-Stock. Contact us

                                              Riot Ronin Tall Barrels (Set of two)

                                              <p><strong></strong>Barrel shape, the most stable shape of bushings commonly used for downhill and freeriding.</p> <p><strong>The tall barrel are specialy made to fit on Ronin trucks (Both models)</strong></p> <p>Set of two bushings (for one truck)</p>
                                              Price €13.00