Powerdyne Pivot Cups...
<p>Replacement Delrin pivot cups for Powerdyne Thrust V2(Larger pivot pin) plates. Outer circum 13.5mm; inner circum 10.5mm, Hights 14.7mm. Set of two(for one plate)</p>
Price €4.00
Showing 1-24 of 24 item(s)
Roll Line Pivot Cups(2...
<p>Roll Line Pivot Cups for Roll Line Plates. <strong>Sold in pairs(for one plate)</strong></p>
Price €5.00
MyFit Gel Heel Pads
<p>This Gel heel cushions will take away any shocks from your feet and legs. Your joints, ligaments, and bones will thank you. Sizes: Small 36-40; Medium 40-43; Large 43-47.</p>
MyFit Powerarch 45...
<p>The MYFIT Powerarch 45 strap is made for Inline skates and roller skates which do not provide enough heel lock. Simply place the velcro strap around your boot and tighten the strap to the desired tightness in order to lock your foot down. Set of 2</p>
Price €10.95
Bont Delrin Pivot Cups...
<h2>Delrin Pivot cups for Bont Athena & Infinity roller skate plates. <strong>Set of 2 cups(for one plate)</strong></h2>
Price €7.00
Rookie Skate Holder...
<p>Rookie Skate Holder Carry Strap. A must have accessory for carrying your skates. Made to fit all skate sizes and styles. Loops around a wheel or toe stop; Strong nylon webbing; Folds away to fit in your pocket; 140cm length</p>
Price €7.00
Sure-Grip Delrin Pivot...
<p>Sure-Grip Delrin Press fit pivot cups. Fit all DA-45 plates, Avenger series, Avanti Magnesium, Invader, XK-4. Delrin cup are more precise and more durable than standard PVC cups. <strong>Set of 2 cups(for one plate)</strong></p>
Price €7.00
Riedell Pro Fit Toe...
<p>Riedell Pro Fit Toe Caps are the perfect combination of toe and lace protection to keep your skates looking like new no matter what surface you skate on. The Pro Fit Toe Cap is crafted from top-quality leather. The Pro Fit Toe Cap attaches at the toe stop, extends around the toe of the boot and finishes about half way up the laces. <strong>Sold in pairs</strong></p>
Price €25.95
Powerdyne Pivot Cups...
<p>Powerdyne Delrin Pivot Cups for Reactor Plates. Does not fit any other plates. <strong>Sold in pairs(for one plate)</strong></p>
Price €5.50
Riedell Leather Toe...
<p>Unlike single strap toe covers that sometimes slide from side to side, these Riedell toe caps have been designed to stay securely in place, protecting your boot under the most demanding use on any surface. Built from a rugged, one-piece construction and finished with actual eyelets that won't damage laces even when pulled very tight Provide the very best protection for your skate boot. <strong>Set of 2</strong></p>
Price €19.95
Sure-Grip Insoles...
<p>Sure-Grip replacement insoles. These are the same contour insoles that come standard with your new skates. Ideal for those who want a little more padding or just looking to replace their warn out insoles.. <strong>Set of 2</strong></p>
Price €5.00
MyFit Footies 2mm Low...
<p><span><span>Myfit 2mm Low Cut Footies can be worn with quad, inline, ice boots and/or cycling shoes as an alternative to socks, enhencing confort and boot feeling.</span> Sizes: Small:34-37; Medium 37-40; Large 40-43</span></p>
Discoblox Radius...
<p>Kit for making Discoblox fit onto plates with tapered kingpins such as Powerdyne Reactor, Revenge and Rival. Kit comes with 4 washers and 4 trimmed cushions in either 88a or 93a.</p>
Price €39.95
Chaya Grind Block...
<p><span class="field_value is_big_string">The Chaya aluminum adapter is a tuning tool that helps you to turn your Chaya roller skate into a park skate. The adapter fits Chaya Shiva and Ophira plates and will fit the 2nd generation of Chaya Zena plates as well as SNEEKRSKATE plates. Chaya grind blocks can be easy assembled by a single screw to the adapter and off you go for your park skating session. </span></p>
Price €14.95
Bont Rubber Bumpers...
<p>This is a replacement protective front bumper for your Bont Hybrid quad skates. Use a hair dryer to make the rubber warm and use super glue to attach it to the boot. The protective bumper comes as a set of two bumpers (left and right). </p>
Price €12.00
Radar Mini Wheel Bag
<p>Radar Mini Wheel Bag. Fit 8 roller skate wheels + tool or bearings set. Easy access to the wheels.</p>
Pilot Ball Stud Pivot...
<p>Ball Stud Pivot Cups for Pilot plates all models: F16 Falcan & Falcon Plus, F16 Eagle & Eagle Plus. <strong>Sold in pairs(for one plate)</strong></p>
Price €5.00
Powerdyne Pivot Cups...
<p>Pivot Cups for Powerdyne Revenge and Rival Plates. <strong>Sold in pairs(for one plate)</strong></p>
Price €6.00
MyFit Derby...
<p>MYFIT Derby Techsole – upgrade your game. The MYFIT Derby Techsole has been designed for Roller Derby skates, but also Park Roller skates. The thin sole out of 3-D molded EVA material combines support and performance.</p>
Price €9.95
Riedell Leather Toe...
<p>Keep your skates looking new with the leather Riedell Toe Guards. Thread the top of the toe guard with your laces around the bottom eyelets of your boot and loop the bottom through the toe stop bolt to prevent the front of your boot from getting scuffed up. <strong>Sold in pairs</strong></p>
Sure-Grip Pivot cups...
<p>Replacement standard PVC pivot cups for Suregrip Robe & Probe plates(the one who comes has standard on most Sure-Grip rollerskates). Size: Ouside diameter 14mm; Inside diameter 8mm; heights 17mm. <strong>Set of 2 cups(for one plate)</strong></p>
Powerdyne Pivot Cups...
<p>Replacement Delrin pivot cups for Powerdyne Thrust V2(Larger pivot pin) plates. Outer circum 13.5mm; inner circum 10.5mm, Hights 14.7mm. Set of two(for one plate)</p>
- Reduced price
- -20%
- Reduced price
- -20%
Bionic Barefoot...
<p><span>Bionic Barefoot Booties can be worn with quad, inline, ice boots and/or cycling shoes as an alternative to socks, enhencing confort and boot feeling.</span></p>
Regular price €20.00 -20%Price €16.00
Bont Rubber Bumpers...
<p>This is a replacement protective front bumper for your Bont Quadstar or Prostar quad skates. Use a hair dryer to make the rubber warm and use super glue to attach it to the boot. The protective bumper comes as a set of two bumpers (left and right).</p>
New products
- Reduced price
- New
- Pack
- Reduced price
- New
- Pack
Prism Hindsight 36"...
<p>Made to be Prism's most versatile board in the line-up, the Hindsight is built compact with a functional kick-tail and mellow features making it perfect for tight urban maneuvering and free-riding. Big wheel flares, mild w, and rocker work together to create pockets that lock your feet in but don't get in the way when doing tricks. Built with 6 plies of maple and 2 layers of fiberglass this board is lightweight but stiff enough to be stable on high-speed mountain roads. L: 36.25" W: 9.75" WB: 24"</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/rlXJNyTzWmQ" title="YouTube video player" frameborder="0"></iframe></p>
Regular price €378.25Price €349.95
- Reduced price
- New
- Pack
- Reduced price
- New
- Pack
Prism Cole Trotta...
<p>Prism Cole Trotta Pro model DH & Freeride longboard. Size 38.5" x 9.75". Single kick. Extra stiif construction made of 7 plys Maple + 1 ply Formica. Large CNC wheel wells, so you can use almost any sizes of wheels.</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/tgKLYatei1k" title="YouTube video player" frameborder="0"></iframe></p>
Regular price €436.25Price €399.95
- Reduced price
- New
- Pack
- Reduced price
- New
- Pack
Santa Cruz Classic Dot...
<p>Santa Cruz Classic Dot Premium Skateboard. Size 8"x31.6", Wheelbase 14.22". Medium Concave, Standard Popsicle shape. 7 Plies US Hard Maple. Set with black Griptape, Bullet 140mm Trucks, Abec 3 Bearings, OJ Wheels 53mm 97mm. Santa Cruz Skate Co. Since 1973</p>
Regular price €163.90Price €149.95
