<p>Harfang sub-ski assembly hardware. Used to fasten the snowskate trucks to the sub-deck. Full Thread, Stainless steel A2. Teflon thread lock. Use M6 x 16mm for actual Harfang Trucks, or M6 x 25mm for older versions. Set of 4 bolts(for to trucks). Use wrench tool N°10</p>

<p>Harfang hardware to assemble snowskate trucks with the top deck. M6(metric 6mm) stainless steel bolts with philips flat heads. This is the standard size used for snowskate mountings. If you are using a skateboard deck as the top deck, you will need the widen the mouting holes to 6mm. use lenght size 25mm if you do not use riser pads, or 35mm if you are using 1/2" riser pad. <strong>Set of 4 bolts with nuts</strong></p>

<p>The Jib Series are Ambition's entry level injected plastic snowskates. Perfect for the beginner snowskater with limited skateboarding experience. Ideal for backyard ride-on obstacles, hill bombs and learning basic tricks. Get jibbin’! Store in a cold &amp; covered area for optimal stiffness and performance. Size 8.5" x 32.5", Precision 7 channels base, Integrated top concave, EVA Foam Grip. Made in Montreal, Canada from recyclable plastic.</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/yPsd9Cwd1Yo" title="YouTube video player" frameborder="0"></iframe></p>

<p>Injection molded polyurethane studded ‘Prism’ stomp pad. Designed and made in Canada by Harfang Solutions for the harshest environments and weather conditions. The studs will enhance your snowskating with added grip and traction under your feet for maximum control and trick consistency. Easy to cut and stick directly onto your snowskate’s foam grip. Follow our recommeded setup or get creative and customize to your own riding style. Includes two 5in x 9in sheets with adhesive backing for a total of 90 studs.</p>

<p>Harfang snowskate 1/2" riser pads to place between the trucks and the top deck. Using riser pads enhance the leverage for more agility, and let you ride on steeper hills. size 1.375″ x 2.625″ x 1/2″ thickness. Hole pattern : 1.625″(matching with M6 hardware). Made in Canada. <strong>Set of 2 pads</strong></p>

<p>Leash Hoveland Surf style col with a carabiner so you can esealy link the leash to your belt. The leash is an essential safety accessoriy allowing to connect the rider to his board, and thus avoid any collision resulting from a board hurting alone.</p>

<p>Harfang snowskate bungee leash. size 4.6" un-streched / 7.6" stretched. The leash is an essential safety accessory allowing to connect the rider to his board, and thus avoid any collision resulting from a board hurting alone. The Harfang leash is the safest of its kind, as it would no break from cold and the strap would resist to the cuts from ski edges passing on it.</p>

<p>Ambition classic team models feature Precision-7 2.0 channel pattern for improved tracking and rail-locking, along with Ambition's unique CPE base material, providing incomparable speed and scratch resistance. Showing off it's maple core, the team snowskate is the perfect choice for any level of rider looking for quality and performance at a price point. Combine with Prism Studded Grip for the ultimate skate on snow experience, as recommended by all of Ambition's team riders. Size 8.5" x 32.5". AS2 Shape. Made in Canada</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/2XAmMDrAzqs" title="YouTube video player" frameborder="0"></iframe></p>

<p>Harfang Claw-XT snowskate trucks(extended version of the Claw trucks). 1.625″ top and bottom hole pattern. Powder coated steel top part, UHMW bottom part. Flipping the base allows for flex adjustment of the sub-ski. Allow to adjust the position of the top deck from front to back. Fit most Sub-deck brands: Harfang, Hovland, LY Snow(Aka Landyachtz), Boyd Hill,...) <strong>Set of 2 trucks with Sub-ski hardware included (4 stainless steel M6x25 hexagonal head screws). Top-deck hardware not included. Made in Canada</strong></p>

<p>Harfang EVA Foam Grip for snowskates. 10" x 37" sheet. Self-adhesive backing.</p>

<p>The Hovland Five-Oh Yeti bi-level Snowskate is made for flip tricks, jumps, rails, ramps and boxes in the park, but will get you around the mountain as well. Top deck is made of 7-ply maple + EVA Foam grip, size 9.5" x 35.5", deep concave, steep kicks, 3 mounting options. The ski is 92cm long with a sintered base. Sub-deck has a Polar core, biaxle &amp; triaxle fiberglass, urethane sidewalls, fully wrapped stainless steel edges, 3 insert options. Harfang 2" tall trucks. Leash included. For Logistical reasons, the snowskate is delivred as a kit with mounting screws. Assembly is very simple and only requires a screwdrider and a N°10 Wrench</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/TSXf3vsDysg" title="YouTube video player" frameborder="0"></iframe></p>

<p>Harfang Dual-decks type allround snowskate with Native graphic. 7 Plys maple 35" x 9.375" top deck mounted on a 43"(109.5cm) twin tip sub deck width 15.3cm x 12.3cm x 15.3cm. This Harfang snowskate is easy to ride, no matter if you are a beginner or a pro. You will enjoy carving on the slopes, doing tricks at the park. The board is set with Harfang Claw trucks and come with a leash for your(and other surounndings users) safety. The top deck is covered with EVA foam. For Logistical reasons, the snowskate is delivred as a kit with mounting screws. Assembly is very simple and only requires a screwdrider and a N°10 Wrench</p> <p></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/aolafAypEW0" title="YouTube video player" frameborder="0"></iframe></p>

<p>Hovland mid-width flatdeck snowskate at 8.875". The <strong>Fancy Lad Flatdeck</strong> is the perfect choice for a backyard session with the buds or lazy park day. Size 8.875" x 35"; Blended radial nose &amp; tail for pop, feel &amp; speed; 7-ply hardrock Canadian maple construction; Custom designed seven groove rail locking pattern; EVA foam grip; Custom designed EVA foam concave</p> <p></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/k0FLuG_Gouc" title="YouTube video player" frameborder="0"></iframe></p>

<p>The Landyachtz Hammer Foam Grip Tape makes your board even more comfortable! A layer of soft foam is underneath the gritty top layer adds comfy to your longboard ride. This grip pack can also be used to make awesome 3D concaves! Add the grip first, then apply a Vicious or other super sticky grip to it to create a raised effect that'll help lock in feet. <strong>2 sheets 11"x11"</strong></p>

<p>Hoveland EVA Foam Grip for snowskates. 10" x 40" sheet.Self-adhesive backing.</p>

<p>Harfang aluminium 3.5" adapter plates. Will let you install Harfang trucks on any sub-ski using 3.5" hole pattern(Lib Tech). 1.625″ threaded holes and 3.5″ mounting holes. Included : 2 plates + mounting hardware (2 stainless steel M6x12 hexagonal head screw)</p>

<p>Hovland narrowest flatdeck snowskate at 8.5", City Slicker is ideal for technical tricks and tight lines. Size 8.5" x 34.75"; Blended radial nose &amp; tail for pop, feel &amp; speed; Fully sealed to keep moisture out. Built with urethane sidewalls, a fiberglass wrap, a laminated core and a sintered base. This makes them incredibly light and strong.; Custom designed seven groove rail locking pattern; EVA foam grip; Custom designed EVA foam concave</p> <p></p> <p></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/k0FLuG_Gouc" title="YouTube video player" frameborder="0"></iframe></p>

<p>Hovland mid-width flatdeck snowskate at 8.875". The <strong>Session Flatdeck</strong> is the perfect choice for a backyard session with the buds or lazy park day. Size 8.875" x 35"; Blended radial nose &amp; tail for pop, feel &amp; speed; Deck fully sealed to keep moisture out. Built with urethane sidewalls, a fiberglass wrap, a laminated core and a sintered base. This makes the board incredibly light and strong; Custom designed seven groove rail locking pattern; EVA foam grip; Custom designed EVA foam concave</p> <p></p>

<p>Harfang Dual-decks type allround snowskate with Azteca graphic. 7 Plys maple 35" x 9.375" top deck mounted on a 43"(109.5cm) twin tip sub deck width 15.3cm x 12.3cm x 15.3cm. This Harfang snowskate is easy to ride, no matter if you are a beginner or a pro. You will enjoy carving on the slopes, doing tricks at the park. The board is set with Harfang Claw trucks and come with a leash for your(and other surounndings users) safety. The top deck is covered with EVA foam. For Logistical reasons, the snowskate is delivred as a kit with mounting screws. Assembly is very simple and only requires a screwdrider and a N°10 Wrench</p> <p></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/aolafAypEW0" title="YouTube video player" frameborder="0"></iframe></p>

<p>The Hovland Five-Oh Snowskate is made for flip tricks, jumps, rails, ramps and boxes in the park, but will get you around the mountain as well. This sub-deck is 92cm long with a sintered base. It has a Polar core, biaxle &amp; triaxle fiberglass, urethane sidewalls, fully wrapped stainless steel edges, 3 insert options. <strong>Sub deck only</strong>. To build a complete snowskate from this sub deck, you will need to had trucks(compatible with Harfang), Top deck, and a leash.</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/TSXf3vsDysg" title="YouTube video player" frameborder="0"></iframe></p>

<p>Harfang Tall Claw-XT snowskate trucks(extended version of the Tall Claw trucks). 1.625″ top and bottom hole pattern. Powder coated steel top part, UHMW bottom part. Flipping the base allows for flex adjustment of the sub-ski. Allow to adjust the position of the top deck from front to back. The Tall height gives more leverage for carving and will let you ride on steeper hills. Fit most Sub-deck brands: Harfang, Hovland, LY Snow(Aka Landyachtz), Boyd Hill,...). <strong>Set of 2 trucks with Sub-ski mounting hardware included (4 stainless steel M6x25 hexagonal head screws). Top-deck hardware not included. Made in Canada</strong></p> <p></p>

<p>Snowskate Ambition Pro model Josh Oakes 8.5" x 32.5". 7-ply epoxy-infused maple deck. 7-groove CPE base that is both fast and scratch resistant. The Ambitions pro models are distinguished from the Team series by a full bottom graphic, and by an addition of concave integrated into the EVA foam grip on the top of the deck. Flat deck type snowskates allow you to do the same tricks as in skateboarding, and use the streets and snowy hills as a playground. Made in Canada</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/_5BeBFr3-y4" title="YouTube video player" frameborder="0"></iframe></p>

<p>The <strong>Buckshot</strong> Newspaper graphics is a true all-mountain Bi-level Snwskate. It handles everything from ice, to groomers, to a couple feet of pow. If you’re not super park focused, and want to be able to skate your whole mountain, this is the snowskate you’re looking for. 7-ply 36" x 9.5" Top deck with high concave and steep kicks. This deck is covered with EVA Foam Grip. 126cm sub deck. The sub deck has a Polar core with Triaxial Fiberglass. It is fully wrap with stainless steel edges and has urethane siewalls. 5 inserts setup options. Trucks 2" high with 1/2" risers. Leash included.</p> <p></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/J8oBgX6vVv8" title="YouTube video player" frameborder="0"></iframe></p>

<p>The Ram Hawk Grahpics is wide and stable, but also soft and poppy. It is Hovland's most versatile snowskate made to rally the whole mountain from the park to shallow pow. 7-ply 36.75" x 9.5" Top deck with high concave and steep kicks. This deck is covered with EVA Foam Grip. 105cm sub deck. The sub deck has a Polar core with Triaxial Fiberglass. It is fully wrap with stainless steel edges and has urethane siewalls. 3 inserts setup options. Trucks 2" high with 1/2" risers. Leash included. For Logistical reasons, the snowskate is delivred as a kit with mounting screws. Assembly is very simple and only requires a screwdrider and a N°10 Wrench</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/J8oBgX6vVv8" title="YouTube video player" frameborder="0"></iframe></p>

<p>Injection molded polyurethane studded ‘Prism’ stomp pad. Color: Clear.Designed and made in Canada by Harfang Solutions for the harshest environments and weather conditions. The studs will enhance your snowskating with added grip and traction under your feet for maximum control and trick consistency. Easy to cut and stick directly onto your snowskate’s foam grip. Follow our recommeded setup or get creative and customize to your own riding style. Includes two 5in x 9in sheets with adhesive backing for a total of 90 studs.</p>

<p>Hovland wider flatdeck snowskate at 9.5". The Club<strong> Flatdeck</strong> is great for big tricks in parks or on the snowy streets. Size 9.55" x 36.5"; Blended radial nose &amp; tail for pop, feel &amp; speed; Deck fully sealed to keep moisture out. Built with urethane sidewalls, a fiberglass wrap, a laminated core and a sintered base. This makes the board incredibly light and strong; Custom designed seven groove rail locking pattern; EVA foam grip; Custom designed EVA foam concave</p> <p></p> <p><iframe width="267" height="476" style="border:none;" src="https://www.facebook.com/plugins/video.php?height=476&amp;href=https%3A%2F%2Fwww.facebook.com%2Fhovlandsnowskates%2Fvideos%2F1111673732865413%2F&amp;show_text=false&amp;width=267&amp;t=0" scrolling="no" frameborder="0"></iframe></p>

<p>Hovland Five-Oh Yeti 35.5" x 9.5" snowskate top deck. 7 ply maple and covered with EVA foam grip. "Wheelbases" placements are matching with the inserts of all Hovland sub decks (Buckshot, Bubba, Ram, Five-Oh). The pronounced kicks offer good stalling points for the feet while allowing you to ollie and place tricks. The kicktail is drilled to allow easy attachment of a leash.</p>

<p>The Hovland Five-Oh Snowskate is made for flip tricks, jumps, rails, ramps and boxes in the park, but will get you around the mountain as well. Top deck is made of 7-ply maple + EVA Foam grip, size 9.5" x 35.5", deep concave, steep kicks, 3 mounting options. The sib-deck is 92cm long with a sintered base. Sub-deck has a Polar core, biaxle &amp; triaxle fiberglass, urethane sidewalls, fully wrapped stainless steel edges, 3 insert options. Harfang 2" tall trucks. Leash included. For Logistical reasons, the snowskate is delivred as a kit with mounting screws. Assembly is very simple and only requires a screwdrider and a N°10 Wrench</p> <p></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/TSXf3vsDysg" title="YouTube video player" frameborder="0"></iframe></p>

<p>Hovland Bubba is a bi-level snowskate focused on big fresh snow powder days conditions. The long 151cm &amp; wide ski offers very good flotation on fresh snow. In terms of feeling, we are very close from snowboarding. Polar core and tri-axial fiber sub desck with 6 inserts options, and is mounted on a 37" x 9.75" double Kicks maple 7-ply top deck with EVA foam grip. Harfang Claw Trucks. Leash included</p> <p></p> <p><iframe width="560" height="314" style="border:none;" src="https://www.facebook.com/plugins/video.php?height=314&amp;href=https%3A%2F%2Fwww.facebook.com%2Fhovlandsnowskates%2Fvideos%2F611735803246209%2F&amp;show_text=false&amp;width=560&amp;t=0" scrolling="no" frameborder="0"></iframe></p>

<p>The Ram Hawk is wide and stable, but also soft and poppy. It is Hovland's most versatile snowskate made to rally the whole mountain from the park to shallow pow. 105cm sub deck. Polar core with Triaxial Fiberglass. It is fully wrap with stainless steel edges and has urethane siewalls. 3 inserts setup options. Compatible with Harfang trucks. Insert placements are matching with any Hovland top decks</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/J8oBgX6vVv8" title="YouTube video player" frameborder="0"></iframe></p>

<p>Hovland Buckshot 126cm Sub deck. Polar core with Triaxial Fiberglass. It is fully wrap with stainless steel edges and has urethane siewalls. 5 inserts setup options(matching with Bear and Harfang Trucks). The Buckshot handles everything from ice, to groomers, to a couple feet of pow. If you’re not super park focused, and want to be able to skate your whole mountain, this is the snowskate you’re looking for. Ski width: Nose 19.5cm/ waist 12.5cm / Tail 13.4cm</p> <p></p>

<p><span>The LY (Aka Landyachtz) Snowskate 37" Topographic is the larger of the two Topographic models, with </span><span>37" x 9.5" top deck and the proven Damask 40" sub-deck, with multiple mounting options. Rise to the occasion and handle any obstacle in your path. Carve and slash through the trees or catch some air and see what's possible on snowskate. Top deck toped with foam tape. Set with Bear Trucks. Includes a swivelling coil leash.</span></p> <p></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/VOxRhmZwKDw" title="YouTube video player" frameborder="0"></iframe></p>

<p>Hovland Bubba snowskate sub-deck. The extra long 151cm &amp; wide ski offers very good flotation on fresh snow. This is the best ever sub-deck for deep powder snow days. In terms of feeling, we are very close from snowboarding. Polar core and tri-axial fiber sub deck with 6 inserts options and metal edges. The inserts placements are matching with every top decks from Hovland. Standard insert compatible with Harfang trucks and most other snowskate trucks brands.</p> <p><iframe width="560" height="314" style="border:none;" src="https://www.facebook.com/plugins/video.php?height=314&amp;href=https%3A%2F%2Fwww.facebook.com%2Fhovlandsnowskates%2Fvideos%2F611735803246209%2F&amp;show_text=false&amp;width=560&amp;t=0" scrolling="no" frameborder="0"></iframe></p>

<p>Harfang Claw Snowskate trucks. Standard height. fiberglass reinforced plastic base plate, single pivot point technology, powder coated steel top part. Fit most snowskate sub-decks such as: Harfang, Hovland, Landyachtz, Boyd Hill... If you are looking for more leverage for freeriding and/or steeper hills, we would recommand to add an additional  1/2" riser pad. Made in Canada. <strong>Set of 2 Trucks with sub-deck mounting hardware(Top deck mounting hardware not included)</strong></p>