Riptide Carver CX & C5 Cone / Cone APS Bushings

<p>Riptide Bushings for Carver CX &amp; C5 Surfskate Trucks. Designed with perfect shape and dimensions to optimize Carver trucks performance. Riptide APS Bushings are available in 5 hardness levels ranging from 85A (softer) to 95A (harder) to meet everyone's expectations. Cone shape, 0.65" (16.5mm) height on the board side and 0.58" (14.7mm) height on the road side. These bushings are comfortable and does not squeeze noise. <strong>Sold in sets of 2 (for one truck).</strong></p>

5 reviews

Price €10.95

View product Compare

Riptide Carver CX & C5 Cone / Barrel APS Bushings

<p>Riptide Bushings for Carver CX &amp; C5 Surfskate Trucks (front &amp; Rear). Designed with perfect shape and dimensions to optimize Carver trucks performance. Riptide APS Bushings are available in 5 hardness levels ranging from 85A (softer) to 95A (harder) to meet everyone's expectations. Barrel 0.65" (16.5mm) height on the board side and Cone 0.58" (14.7mm) height on the road side. These bushings are comfortable and does not squeeze noise. To compage with the all cones setting, the barrel &amp; cone combo have less lean, but is more stable. <strong>Sold in sets of 2 (for one truck).</strong></p> <p></p>

Price €10.95

View product Compare

RipTide Cones APS Longboard Bushings(For one truck)

<p>RipTide Cones are a classic shape for carving and slalom. It ensure a maximum turnability and rebound. <strong>Set of two (For one truck)</strong></p>

5 reviews

Price €9.50

View product Compare

Riptide Street Cone/ Cone APS Skateboard Bushings(4 Pces)

<p>Riptide Street Cones/ Short Street Cones combo in APS Formula. Those bushings are a real upgrade for your skateboard trucks. The high quality urethane range from 60A(extremly soft) to 97.5A(Hard), so no matter if you are a yound kid or a fat old guy, you will get the duro that you need. Cone/ Cone combo works great if your are looking for more agility and deeper lean. Fit most " indy style" conventional trucks(Indepedendent, Venture, Tensor, Iron, Thunder,...) <strong>Set of 4 cushions with cup washers.</strong></p>

Price €18.95

View product Compare

Riptide Street Barrel/ Cone APS Skateboard Bushings (4 Pces)

<p>Riptide Street Barrels/ Short Street Cone combo in APS Formula. Those bushings are a real upgrade for your skateboard trucks. The high quality urethane range from 60A(extremly soft) to 97.5A(Hard), so no matter if you are a yound kid or a fat old guy, you will get the duro that you need. Barrel/ Cone combo is a good mix between stabily and agility. Fit most " indy style" conventional trucks(Indepedendent, Venture, Tensor, Iron, Thunder,...) <strong>Set of 4 cushions with cup washers.</strong></p>

8 reviews

Price €18.95

View product Compare

Riptide Short Street Cones APS Skateboard Bushings

<p>Riptide Short Street Cones APS Bushings. Sized to fit properly in conventional "Indy-style" trucks(Independent, Venture, Thunder, Iron, Tensor,...). Custom APS Urethane Formula for ultra-performance and sweet rebound. 975" Diameter x .4" High (24.77mm Dia x 10.2mm High). We recommend using those Short Street bushings road side, matching with Street Bushings board side. Sold as a pair of 2 bushings with washer cup</p>

3 reviews

Price €9.50

View product Compare

Riptide Carver C7 Cone / Barrel APS Front Arm Bushings

<p>High-quality bushings designed by Riptide to perfect the tuning and performance of the Carver C7 surfskate front truck. Choose from a wide range of hardness levels, from 80A (Soft) to 97.5A (Very Hard). Cylinder shape board side (street height 0.5") and cone shape road side (Short Street height 0.4"). Offers a progressive, quiet, and comfortable ride. Made with APS (Animated Polymer Systems) formula, providing responsiveness without being overly aggressive. Also compatible with standard skateboard trucks (Independent, Venture, Mini Logo, Tensor, Thunder, etc.). <strong>Includes a set of 2 bushings + 1 small cup washer.</strong></p>

Price €10.95

View product Compare

Riptide Tall Cones APS Longboard Bushings (For one truck)

<p>Tall Cones bushings would fitspecifics trucks such as Ronin, Rogue, Arsenal, Bear Kodiak,... The cone shape would let you turn deeper and works great for carving. APS is a lively and responsive, high-performance urethane with just the right amount of rebound. Very linear in response so you can control the bushing instead of the other way around. <strong>Set of two bushings (For one single truck)</strong></p>

Price €10.95

View product Compare

Riptide Cones KranK Longboard Bushings

<p>RipTide Cones are a classic shape for carving and slalom. It ensure a maximum turnability and rebound. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! Set of 2 bushings(for one truck)</p>

1 review

Price €11.50

View product Compare

RipTide FatCones APS Longboard Bushings

<p><span>Riptide Fat Cones have the same initial stability as a Barrel but as you lean, they offer progressively higher resistance the further you go.  <span>The Barrel / FatCone setup</span><span> is for those looking for higher stability at higher speeds but still highly maneuverable for slides, high speed carving and downhill applications.  This setup is ideal when you need to restrict the ends of the lean to prevent wheelbite or if you just like a more progressive feel to your setup. APS Formula. Set of 2 bushings with washers</span></span><strong></strong></p>

3 reviews

Price €11.50

View product Compare

RipTide Tall Fat Cones APS Longboard Bushings

<p>RipTide Tall Fat Cones has the circumference of a barrel where the bushings sit on the truck, and then gradually widens to the size of a chubby where the washers sit. This gives you the ability to get more lean than a chubby, while giving you progressive resistance the more you turn. APS Urethane. Tall bushings are specificly made for Ronin, Rogue, Bear Kodiak trucks. <strong>Set of two bushings</strong></p>

2 reviews

Price €13.95

View product Compare

Independent Standard Cylinder Skateboard Bushings

<p>Independent Standard Cylinder Bushings.<strong> </strong><span style="font-family:Arial, Helvetica, sans-serif;font-size:12px;line-height:normal;">Made with an Exclusive High-Rebound Formula that improves grind clearance and adjustability when used with the included washers. <span>Properly sized to fit Independent trucks</span>(also fit most skateboard trucks: Venture, Iron, Destructo, Thunder,...) Includ 4 Bushings(For 2 Trucks).</span></p>

10 reviews

Price €9.95

View product Compare

Riptide Tall Cones Krank Longboard Bushings

<p>Tall Cones bushings would fitspecifics trucks such as Ronin, Rogue, Arsenal, Bear Kodiak,... The cone shape would let you turn deeper and works great for carving. Riptide highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the kingpin nut!. <strong>Set of two bushings (For one single truck)</strong></p>

1 review

Price €13.95

View product Compare

Riptide Waterborne Rail Adapter APS Surfskate Bushings (4 Pces)

<p>Set of 4 Riptide Bushings for Waterborne Surfskate rail adaptor (rear truck). APS Formula. Choose from 5 durometers ranging from 87.5A (softer) to 97.5A (harder) and thus fine-tune the setup of your Waterborne surfskate according to your weight and riding style. Pack of 4 0.6" height cushions (2 barrels + 2 cones)</p>

1 review

Price €21.95

View product Compare

Riptide Street Barrel/ Cone Krank Skateboard Bushings (4 Pces)

<p>Riptide Street Barrel/Short Street Cone Bushing Kit Krank formula. Combines stability and agility. Bushings specially designed for skateboards &amp; cruisers truck (Independent, Venture, Thunder, Iron, Tensor, Bear Polar, Enuff...), also compatible with Yow trucks. Riptide bushings are of excellent quality and enhance truck performance by adjusting to weight and riding style. The Krank formula reacts to clamp pressure to provide optimal adjustment for each individual. Quick return to the initial position. <strong>Set of 4 bushings and cups (for 2 trucks).</strong></p>

Price €21.95

View product Compare

Venom Caliber Plug Barrel/ Cone HPF Longboard Bushings

<p>Venom Plug Barrel/cone combo Bushings for Caliber Trucks(Also Fit Bear Grizzly Gen- &amp; Randal III) are designed to remove lateral play from the truck by filling the gaps between the hanger and the kingpin. Resulting in a quicker return to center, increased responsiveness, and a more direct turning feel over a traditional barrel bushing. Now available in 5 different durometers in Venom's classic HPF formula! 1 set= 2 bushings</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/HcQY55vIVbE" title="YouTube video player" frameborder="0"></iframe></p>

2 reviews

Price €14.95

View product Compare

Venom SHR Super Carve Bushings

<p>Set of 2 High Rebound Venom Super Carve conical bushings, made for carving in mind</p>

4 reviews

Price €11.95

View product Compare

• -20%
• -20%

• -20%
• -20%

Sabre Cones bushings

<p>Set of two Sabre cones bushings (for one trucks). Cones bushings are reactive and allow a maximum lean.</p>

Regular price €9.95 -20%

6 reviews

Price €7.96

View product Compare

Riptide Tall Fat Cones Krank Longboard Bushings

<p>Riptide Tall Fat Cones has the circumference of a barrel where the bushings sit on the truck, and then gradually widens to the size of a chubby where the washers sit. This gives you the ability to get more lean than a chubby, while giving you progressive resistance the more you turn. <span>Krank formula is Riptide's highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut</span>. Tall bushings are specificly made for race trucks such as Ronin, Rogue, Don't Trip, Bear Kodiak trucks. <strong>Set of two bushings</strong></p>

Price €18.50

View product Compare

Riptide Short Street Cones Krank Skateboard Bushings

<p>Riptide Short Street Cones Skateboard Truck Bushings, Krank Formula. Compatible with most street trucks: Independent, Venture, Thunder, Tensor, Iron, etc. High-performance formula that significantly improves truck performance and allows adjustment based on weight or riding style. Diameter 24.77mm x Height 10.2mm. Typically placed on the road side. For the board side, we recommend the Streets. The Krank bushing responds to tightening pressure to best adjust to each rider. Quick return to the initial position. Sold in pairs (2 bushings) with washers.</p>

Price €11.50

View product Compare

Riptide Penny Barrel/ Cone APS Bushings (4 Pces)

<p>Riptide Street Barrels/ Cones bushings combo speciflicly deisigned to fit Penny cruiser's trucks. APS Formula. Those bushings are a real upgrade for your cruiser's trucks. The high quality urethane range from 75A(softer) to 90A(Medium). Barrel/ Cone combo is a good mix between stabily and agility. Heights: Barrel 0.55" / Cone 0.5". <strong>Set of 4 cushions.</strong></p>

Price €18.95

View product Compare

Carver CX & C5 Cones / Cones Bushings Set

<p>Replacement Bushing Set for Carver CX &amp; C5 Surfskate Trucks. Cone-shaped bushings with lower hardness than the original Carver truck bushings (89A). More rebound. These Carver bushings will enhance your agility. Available in 81A (soft) and 84A (medium). <strong>Set includes 4 bushings and 2 kingpin nuts.</strong></p>

2 reviews

Price €14.95

View product Compare

Mindless Voodoo Juju Bushings

<p class="_28cEs">Juju bushings are made using Mojo urethane and are available in various duros; Carve 83A (Green), Freeride 90A (Purple), Race 94A(Blue). Supplied as a pack of six bushings; four barrels and two cones, plus 2 cups &amp; 2 flat washers, these awesome bushings will really allow you to set your longboard up exactly how you want it to ride!</p>

3 reviews

Price €9.95

View product Compare

Independent Original Skateboard Cushions

<p>Bushings specific format for old school trucks of the Independent brand, series stage 1 to 7. The original cushions have been specially reissued on the occasion of the re-launch of Independent Stage 4 trucks. Enjoy a vintage format combined with a modern rubber formula. Contains 2 barrel bushings (height 15mm), 2 cones (height 13mm), and 4 metal washers. Choose from 4 hardness levels: 88A (Super Soft), 90A (Soft), 92A (Medium), 94A (Hard).</p>

Price €10.95

View product Compare

Bones Hardcore Bushings White (4Pces)

<p>Set of four Bones busings. Color white. Feet most street skateboards trucks. Bones bushings meet the highest standings required, and are the choice of many pro skateboarders</p>

4 reviews

Price €14.95

View product Compare

Bones Hardcore Bushings Black (Per four)

<p>Set of four Bones busings. Color black. Feet most street skateboards trucks. Bones bushings meet the highest standings required, and are the choice of many pro skateboarders</p>

3 reviews

Price €14.95

View product Compare

Riptide 6464 Evolve Krank Bushings Kit

<p>Complete kit of bushings, pivot cups, and washers for optimal adjustment of Evolve, Vestar Blackhawk, Flipsky 12" &amp; 15.2" electric skateboard trucks. This box has been developed after numerous tests, and mixes different shapes and hardnesses of cushions for a perfect balance between maneuverability and stability. The Krank formula, allows you to refine the adjustment by playing on the tightening.</p>

2 reviews

Price €99.95

View product Compare