<p>8mm diameter precision bearing spacers (Fit most trucks) and 10mm spacing (standard spacing for almost any skateboard & longboard wheels). The wide shoulders ensure a flawless support with the bearings. Benefits of Precision Spacers: Optimized bearing acceleration and speed performance; better preserve the wheels cores and bearings; more precision and grip in turns; slides smoother. <strong>Set of 4</strong></p>
<p>Speed rings to fit on standard 8mm axles. To be placed between the hanger and the inner bearing, / between the outter bearing and the axle nut. Match with most trucks. <strong>Set of 4<br /></strong></p>
<p>10mm X 10mm bearing spacers <span style="color:#ff0000;">Only fits to 10mm axles trucks such as Surf Rodz 10mm, Bear Smokey, Magun </span>Match with most longboard wheels. Set of four</p>
<p>Standard skate bearings spacers. To be used with 8mm axles. Fit on most skateboard and longboard wheels. The spacers will help keeping the bearings in place into the wheels, improving your riding precision. Set of four spacers</p>
<p>Specific 8X8mm aluminium bearings spacers. <span style="color:#d0121a;">Only match with Roller quad wheels and Kryptonic</span>, Cadillac, and Gravity (models 2005 and before) wheels. To be used with 8mm axles. The spacers will help keeping the bearings in place into the wheels, improving your riding precision. Set of four spacers</p>
<p>Bolzen skateboard mounting hardware. Phillips flat head. 1"=>Board without pads; 1.25"=> Board with pads up to 1/4"; 1.75"=> Board with pads up to 1/2"; 2" Board with wedged pads up to 8°; 2.5"=> Board with wedged pads up to 15°; 3"=> Board set with double wedged pads. <strong>Set of 8 bolts & nuts</strong></p>
<p style="margin-bottom:0cm;">Set of eight Longboard skateboard mounting Bolts, nuts, and washers(no washer with 2" bolts sets). Phillips Button Sockets bolts. Can be use on drop through and top mount settings</p>
<p>Flat bushings washers. Small(0.4")=> Best fit with cones bushings; Large(1"): best fit with Barrel bushings. Flat washers would let you trucks lean deeper to compare with a truck using cup washers. Set of four</p>
<p>Independent Genuine Parts Axle Rethreaders feature a pilot shaft that makes it super easy to properly place on and rethread your trucks axles. Package comes with 1 pilot shaft rethreader, 4 fresh axle nuts, and a Genuine Parts sticker.</p>
<p>Made from extremely strong steel (significantly stronger than Grade 8), these Loaded button head bolts integrate the washer into the bolt itself in order to reduce the height of the bolt heads while still distributing load pressure.</p>
<p>Mini Logo Kingpin spare part. Lenght 1.9". The kingpin is the bold that connect the truck's base plate and hanger together. Fit most regular skateboard trucks (Mini Logo, Indepedent, Venture,...)</p>
<p>YOW Bearings & Washers pack for skatesurf system. Spare parts for Your Yow Streetsurf <span style="color:#d0121a;"><strong>V3</strong></span>. Include 2 specifics bearings, washers, 1 bronze sleeve bearing self lub. Those parts should last forever if correctly use. Make sure to never over krank your bearings, and never let any slop in the system.</p>
<p>YOW Bearings & Washers pack for skatesurf system. Spare parts for Your Yow Streetsurf <span style="color:#d0121a;"><strong>V4 & Meraki</strong></span>. Include 2 specifics bearings, washers, 1 bronze sleeve bearing self lub. Those parts should last forever if correctly use. Make sure to never over krank your bearings, and never let any slop in the system.</p>
<p>YOW J-Bay 33" with lines graphics is an amazing alternative to surfing for days without waves. 33" is a mid size, responsive, but without loosing control. This board is intended to be set with surfskate trucks, however, you can also use it with regular or reversed Trucks for a cruising/carving use. Grip tape included</p>
<p>Madrid Trucks Copers. Old-school skateboard accessory straight back from the 1980s - 1990s. Copers are plastic protectors to clamp onto the hanger to protect them from scratches and impacts. Length 12cm. Fits most skateboard standard trucks (may vary depending on the hanger shpae and lenght). <strong>Sold in pairs.</strong></p>
<p>Powerful Shredlights SL-1000+ wireless flashlight. Sync and adjust your lighting directly from your smartphone via the app. Compact design. Shredlights can be attached to a variety of supports for bikes, skateboards, helmets, OneWheel, etc. (sold separately). Power up to 1000 Lumens with a runtime of 120 minutes at maximum power and up to 36 hours in flash mode. Illuminates up to 30 meters at night when attached to a helmet. 5 lighting modes, size 1.5"x1.3"x3.6" weighing 125g, certified IPX7 waterproof (1 meter for 30 minutes), Full charging in 4 hours. Samsung 3500mAh battery. Rechargeable via USB-C cable (provided), 23° angle diffusion lens, aluminum body.</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/tuS9qURDAWM?si=-Q4ASP-vaLA875Kk" title="YouTube video player" frameborder="0"></iframe></p>