<p>Venom SHR Ronin specific. Made out of Ultra High Rebound Formula, those Venom bushings are a great update to any models of Ronin Trucks. Tall barrels shape. <strong>Set of two bushings (For one truck)</strong></p>

<p>Venom Tall Barrel HPF bushings are made to fit on Ronin, Rogue, Kodiak, and any other trucks needed "Tall" type bushings. HPF(High Performence Formula) is especialy good for downhill riding, as it as less rebound than the HPF formula.  <strong>Set of two bushings (For one truck)</strong></p>

<p>Venom Tall Keg HPF shape is designed to give more progressive resistance and rebound than a barrel, but without the hard stop of a normal stepped bushing. Ideal for use on the board-side, especially if you want to go to a softer setup without losing stability. Just think of it as a barrel, but with that thicky-thicc-thicc as Nelly would say. <strong>Set of two</strong></p>

<p>Riptide Chubby APS step barrel bushings. The hallmark of this shape is its stability - provides an extremely stable platform boardside. Progressive resistance to lean but still very supple. Works well with restrictive, as well as non-restrictive, bushings seats. Supplied with stainless steel fender washers. <strong>Set of 2</strong></p>

<p>RipTide Cubes Bushings, specialy made for specific square bushings sits Rey Trucks, allow you to change the feel of your ride simply by altering the orientation of the bushing in the bushing seat! <strong>Set of two bushings</strong></p>

<p><span>Riptide Fat Cones have the same initial stability as a Barrel but as you lean, they offer progressively higher resistance the further you go.  <span>The Barrel / FatCone setup</span><span> is for those looking for higher stability at higher speeds but still highly maneuverable for slides, high speed carving and downhill applications.  This setup is ideal when you need to restrict the ends of the lean to prevent wheelbite or if you just like a more progressive feel to your setup. Krank Formula. Set of 2 bushings with washers</span></span></p>

<p>The magnum bushings are an adaptation to Riptides Chubby Bushing sized specifically for the seat of Paris Trucks.</p> <p>Set of two bushings (For one truck)</p>

<p>The Venom Eliminator HPF longboard bushings, with their relatively original shape, allow you to turn deeper, while being ultra stable in a straight line. The HPF compound (High Performance Formula), has a little less rebound than the SHR formula, and is more suitable for downhill and freeride practices. <strong>Pair of two bushings</strong></p>

<p>Venom Bushings is champion's Zak Maytum own brand. Very high quality rubber with maximum rebound for stability in all conditions. The Eliminator bushing, with its relatively original shape, allows you to push your turns deeper, while being ultra stable in straight lines. The Eliminator's main use is for downhill and freeriding. <strong>Set of two bushings</strong></p>

<p>Set of two RipTide Street Chubby APS Bushings specialy made to fit on Independent trucks</p> <p>Include 2 bushings and 2 flat washer rings</p>

<p>More stable than a barrel and less restrictive than an Eliminator, the Venom Freeride SHR bushing has a wide, stepped design that can be flipped for different turning response. <strong>Set of two bushings (For one truck)</strong></p>

<p>The Magnum bushings are an adaptation to Riptides Chubby Bushing sized specifically for the seat of Paris® Trucks.</p> <p>Set of 2 bushings (for one truck)</p>

<p>Riptide APS formula bushing for Waterborne Surfskate adapter (front). Let's adjust your Waterborne setting to perfectly dial to your weight and style. Durometers from 87.5A (Very soft) to 97.5A (Hard). Made in USA</p>

<div>Riptide APS Kore Inserts. Used to replace Spherical bearings in trucks that use them in the hanger. Dimensions of the Kores are .8125" (20.63mm) OD x .373" (9.47mm) ID x .375" (9.53mm) high. Fit on: Bear Smokey, Buzzed Niko, Don’t Trip — ANY MODEL WITH SPHERICAL, Radikal — ANY MODEL WITH SPHERICAL, Rogue, Sk8kings 2X. <strong>Set of two kore inserts</strong></div>

<p>RiotPlugs mimic spherical bearings in that they reduce translation of your hanger through a turn</p> <p style="margin-bottom:0cm;">Fits on Gunmetal V2 Trucks</p> <p style="margin-bottom:0cm;">Set of two</p>

<p>The hallmark of this shape is its stability - provides an extremely stable platform boardside. Progressive resistance to lean but still very supple.</p> <p>Set of two (For ine truck)</p>

<p>Complete kit of bushings, pivot cups, and washers for optimal adjustment of Evolve, Vestar Blackhawk, Flipsky 12" &amp; 15.2" electric skateboard trucks. This box has been developed after numerous tests, and mixes different shapes and hardnesses of cushions for a perfect balance between maneuverability and stability. The Krank formula, allows you to refine the adjustment by playing on the tightening.</p>

<p>New to the Sabre bushings line up, King cone is stable and turny in the same time, perfect for freeriding. <strong>Set of two bushings</strong></p>

<p>Venom Eliminator Bushings first generation. Super High Rebound Formula</p>