List of products by brand Powerdyne

<p>Black composite plugs for toe stop housings. Use those dance plugs when you are not using your stoppers. Plugs avoid damaging your plates and/or the floor. Set of 2 plugs. Dimeter 5/8" with imperial(US) thread</p>

<p>The PowerDyne Y3 Skate Tool features 3 tools in one and is designed with: a 1/2” socket for axel nuts, a 9/16” socket for King Pin lock nuts, and finally a 15/16” open wrench for toe stop lock nuts. They Y3 is a great tool for most plates, and one of, if not the best tools for roller skate plates that use a washer and nut system for toe stops.</p>

<p>Powerdyne Stopper Insert for Powerdyne Thrust plates. Thrust are the nylon plates who usually comes factory mounted on Riedell R3, Dart, She Devil, Vandal rollerskates. Sold individualy</p>

<p>Powerdyne Reactor Neo has been stress-tested &amp; refined to reduce weight, increase strength, and improve feel. It has a bright silver anodized finish and comes with solid 7075 aluminum kingpins and high rebound urethane cushions for the instant response found in plates that are twice the price.</p>

<p>Powerdyne spare truck for Powerdyne Triton plates Thrust plates(Riedell R3, Dash,...). This truck fits seconde generation Thrust plates. If you are not sure at witch plates you have, please refer to the picture. The V2 has a wider hanger pin. Aluminium cast hanger, 8mm axles. Sold individualy and without axle nuts.</p>

<p>The PowerDyne Y4 Skate Tool features 4 tools in one! This versatile skate tool includes a 1/2” socket for axel nuts, an 11/16” socket for truck adjustment lock nuts on PowerDyne Reactor Series plates, a removable 9/16” socket for truck adjustment lock nuts, and finally a 5mm T Handle Allan wrench for toe stop set screws and PowerDyne Arius plate axis pins.</p>

<p>Powerdyne Toe Stop Screws. Match with Powerdyne Falcon &amp; Revenge plates; Roll Line plates all models exept Mirage. Set of 2 screws</p>

<p>the <strong>Reactor Fuse</strong>, offers exceptional performance at a great value. The lightweight nylon plate is reinforced with fiberglass to offer strength and durability. Fuse comes with an integrated aluminum toe stop insert that securely locks toe stops in place with a 5mm Allen bolt. The kingpins are set at 10-degrees for superior power, stability and stopping control. The Fuse features click action kingpin adjustment nuts to take the guess work out of cushion adjustment. The Reactor Perfect for beginner and intermediate skates, or verterans looking for a lightweight and durable plate.</p>

<p>Replacement cushions for Powerdyne Reactor plates. High quality high rebound formula. Just like shocks on a car, Magic Cushions soak up the imperfections of the surface, keep you connected to the road ahead through enhanced feedback, load up when pressed to the limit, and then release your stored power in a forceful yet predictable manner.They are the most responsive cushions available for your skating skills. Set of bushings (=enough for a full set of rollerskates). Red 78A(Soft), Orange 82A (Medium), Yellow 85A (Hard)</p>

<p>Grippy natural rubber and a large, flat surface with signature dimples provide the stability and predictable bite needed for fast stops, quick starts and delicate balance. To help reduce weight, the signature bell shape and the forged, hollow stem combine to make the Powerdyne Jupiter lighter than other bulky toe stops, allowing the skater to be quicker and more nimble.</p>

<p>Powerdyne King Pin for Reactor plates. Sold individualy</p>

<p>Powerdyne Kingpin for Thrust / Triton / DynaPro plates. Sold individualy</p>

<p>Mounting Hardware set for Roller Skates. Must be use with hard sole shoes such as Roller Derby and Artistic boots. Include bolts 12 bolts(8x3.5m + 4x6.9cm) with washers and nuts.</p>

<p>Powerdyne Delrin Pivot Cups for Reactor Plates. Does not fit any other plates. <strong>Sold in pairs(for one plate)</strong></p>

<p>Powerdyne Arius Toe stop screws. This screw keep the Toe Stop of the POWERDYNE Arius Plate locked. built in washer. <strong>Sold in pairs</strong></p>

<p><span>One Large size(3/16") allen wrench used to adjust your toe stop screws on the Sure Grip, Power Trac, Laser, Snyder , Roll Line, Powerdyne Reactor,... plates. </span></p>

<p>Replacement Delrin pivot cups for Powerdyne Thrust V2(Larger pivot pin) plates. Outer circum 13.5mm; inner circum 10.5mm, Hights 14.7mm. Set of two(for one plate)</p>