Longboard Trucks Bushings

Bushings

skateboard bushing sbuyer s guide

Bushings are tiny pieces of urthane found on skateboards trucks. Its exist plenty of shapes and...

skateboard bushing sbuyer s guide

Bushings are tiny pieces of urthane found on skateboards trucks. Its exist plenty of shapes and hardness to customise trucks reactivity to the required needs. Hardness is rated on a scale called durometer. Highest is the durometer, harder is the bushing. Hard bushings are stable but turn less Soft bushings are very reactive but less stable.



Filters

Brand

Durometer

Bushings Heights & Shapes

product name

      Riptide Carver CX & C5 Cone / Cone APS Bushings

      <p>Riptide Bushings for Carver CX &amp; C5 Surfskate Trucks. Designed with perfect shape and dimensions to optimize Carver trucks performance. Riptide APS Bushings are available in 5 hardness levels ranging from 85A (softer) to 95A (harder) to meet everyone's expectations. Cone shape, 0.65" (16.5mm) height on the board side and 0.58" (14.7mm) height on the road side. These bushings are comfortable and does not squeeze noise. <strong>Sold in sets of 2 (for one truck).</strong></p>
      Price €10.95
      product name

          RipTide Barrels APS (For one truck)

          <p>The Barrels are a classic shape for Downhill and freeriding. It ensure a maximum of stability at high speed.</p> <p>Set of two (For one truck)</p>
          Price €9.50
          product name
          • New
          • New

          Riptide Street Barrel/ Cone APS Skateboard Bushings (4 Pces)

          <p>Riptide Street Barrels/ Short Street Cone combo in APS Formula. Those bushings are a real upgrade for your skateboard trucks. The high quality urethane range from 60A(extremly soft) to 97.5A(Hard), so no matter if you are a yound kid or a fat old guy, you will get the duro that you need. Barrel/ Cone combo is a good mix between stabily and agility. Fit most " indy style" conventional trucks(Indepedendent, Venture, Tensor, Iron, Thunder,...) <strong>Set of 4 cushions with cup washers.</strong></p>
          Price €18.95
          product name

              Riptide Carver CX & C5 Cone / Barrel APS Bushings

              <p>Riptide Bushings for Carver CX &amp; C5 Surfskate Trucks (front &amp; Rear). Designed with perfect shape and dimensions to optimize Carver trucks performance. Riptide APS Bushings are available in 5 hardness levels ranging from 85A (softer) to 95A (harder) to meet everyone's expectations. Barrel 0.65" (16.5mm) height on the board side and Cone 0.58" (14.7mm) height on the road side. These bushings are comfortable and does not squeeze noise. To compage with the all cones setting, the barrel &amp; cone combo have less lean, but is more stable. <strong>Sold in sets of 2 (for one truck).</strong></p> <p></p>
              Price €10.95
              product name

                  RipTide Cones APS Longboard Bushings(For one truck)

                  <p>RipTide Cones are a classic shape for carving and slalom. It ensure a maximum turnability and rebound. <strong>Set of two (For one truck)</strong></p>
                  Price €9.50
                  product name

                      RipTide Tall Barrels APS Longboard Bushings (For one truck)

                      <p>Tall Barrels bushings specialy made for Ronin trucks (Cast and Billet). The barrel shape ensure maximum stability for speed and downhill use. APS Urethane. Fit Ronin Trucks, Arsenal Trucks, Bear Kodiak, Rogue,... <strong>Set of two bushings (For one single truck)</strong></p>
                      Price €10.95
                      product name
                      • New
                      • New

                      Riptide Short Street Barrels APS Skateboard Bushings

                      <p>Riptide Short Street Barrels bushings. Fit most TKP  street &amp; cruisers Trucks. Use the short Street barrel road side, in addition with a <a href="https://fulkit-skateboards.com/en/bushings/4330-55726-riptide-street-barrels-aps-skateboard-bushings.html">street barrel</a> or <a href="https://fulkit-skateboards.com/en/bushings/377-558-riptide-street-chubby-aps.html">street chubby</a> board side. Barrels maximize the stabily and reduce the truck's lean. APS Formula with a large choice of durometers ranging from 60A(Very soft) to 97.5A(Very Hard). <strong>Set of 2 bushings with flat washers</strong></p>
                      Price €9.50
                      product name
                      • New
                      • New

                      Riptide Street Cones APS Skateboard Bushings

                      <p>Riptide Street Cones APS Bushings. Sized to fit properly in conventional "Indy-style" trucks(Independent, Venture, Thunder, Iron, Tensor,...). Custom APS Urethane Formula for ultra-performance and sweet rebound. 975" Diameter x .5" High (24.77mm Dia x 12.7mm High). We recommend using those Street bushings board side, matching with Street Short Bushings road side. The Cone's shape is turnier and will let you turn deeper. Sold as a pair of 2 bushings with washer cup</p>
                      Price €9.50
                      product name

                          Venom Downhill Barrels HPF Longboard bushings

                          <p>Venom Downhill Barrels bushings HPF (High Performance Fomula). Those bushings will help you being more stable at speed and are one of the most popular option for DH &amp; Freeriding. Large range of durometers ranging from 73A (extra soft) to 97A (Extra Hard). Venom is a Zak Maytum own compagnie. Made in USA. <strong>Set of Two cushions (For 1 truck)</strong></p>
                          Price €10.95
                          product name
                          • New
                          • New

                          Riptide Street Cone/ Cone APS Skateboard Bushings(4 Pces)

                          <p>Riptide Street Cones/ Short Street Cones combo in APS Formula. Those bushings are a real upgrade for your skateboard trucks. The high quality urethane range from 60A(extremly soft) to 97.5A(Hard), so no matter if you are a yound kid or a fat old guy, you will get the duro that you need. Cone/ Cone combo works great if your are looking for more agility and deeper lean. Fit most " indy style" conventional trucks(Indepedendent, Venture, Tensor, Iron, Thunder,...) <strong>Set of 4 cushions with cup washers.</strong></p>
                          Price €18.95
                          product name

                              Independent Standard Conical Skateboard Bushings

                              <p>Independent Standard Cylinder Bushings.<strong> </strong><span style="font-family:Arial, Helvetica, sans-serif;font-size:12px;line-height:normal;">Made with an Exclusive High-Rebound Formula that improves grind clearance and adjustability when used with the included washers. Double cones will helps you turn deeper. <span>Properly sized to fit Independent trucks</span>(also fit most skateboard trucks: Venture, Iron, Destructo, Thunder,...) Includ 4 Bushings(For 2 Trucks).</span></p>
                              Price €9.95
                              product name

                                  YOW Surfskate V4 / Meraki Spare springs (2 Pk)

                                  <p>To keep the best feeling with your YOW Surfskate, we recommend to regulary change your Yow Spring. <strong>Pack of 3 springs+Nuts, <span style="color:#d0121a;">ONLY FITS YOW V4 &amp; MERAKI SYSTEM. Spring size must be the same as the one from the purchased system. 4mm=Soft; 5mm=Hard</span></strong></p>
                                  Price €12.95
                                  product name

                                      RipTide Paris Canon APS Longboard Bushings(For 1 Truck)

                                      <p>The Canon bushings are the equivalent to Riptides standard Barrel Bushing sized specifically for the seat of Paris Trucks.<strong> Set of two bushings</strong></p>
                                      Price €9.50
                                      product name

                                          Venom Tall Barrels HPF Longboard bushings

                                          <p>Venom Tall Barrel HPF bushings are made to fit on Ronin, Rogue, Kodiak, and any other trucks needed "Tall" type bushings. HPF(High Performence Formula) is especialy good for downhill riding, as it as less rebound than the HPF formula.  <strong>Set of two bushings (For one truck)</strong></p>
                                          Price €14.95
                                          product name

                                              Venom Downhill Barrels SHR Longboard Bushings

                                              <p>Venom (Aka Zak Maytum Skate Products) Downhill Barrels SHR longboard skate bushings. Standard height compatible with most longboard trucks (Paris, Caliber, Bear Grizzly Gen 6, Atlas,...). The cylindrical shape offers maximum stability and is the most popular in DH and Freeride. The SHR (Super High Rebound) formula allows the bushing to return to its original shape even more quickly. Thanks to this formula, the truck still turns as much, but gains in stability. Sold in pairs (2 Cushions)</p>
                                              Price €11.95
                                              product name

                                                  Venom Tall Barrels SHR Longboard bushings

                                                  <p>Venom SHR Ronin specific. Made out of Ultra High Rebound Formula, those Venom bushings are a great update to any models of Ronin Trucks. Tall barrels shape. <strong>Set of two bushings (For one truck)</strong></p>
                                                  Price €15.95
                                                  product name
                                                  • New
                                                  • New

                                                  Riptide Street Barrels APS Skateboard Bushings

                                                  <p>Riptide Street Barrels APS Bushings. Sized to fit properly in conventional "Indy-style" trucks(Independent, Venture, Thunder, Iron, Tensor,...). Custom APS Urethane Formula for ultra-performance and sweet rebound. 975" Diameter x .5" High (24.77mm Dia x 12.7mm High). We recommend using those Street bushings board side, matching with Street Short Bushings road side. Sold as a pair of 2 bushings with washer cup</p>
                                                  Price €9.50
                                                  product name
                                                  • New
                                                  • New

                                                  Riptide Short Street Cones APS Skateboard Bushings

                                                  <p>Riptide Short Street Cones APS Bushings. Sized to fit properly in conventional "Indy-style" trucks(Independent, Venture, Thunder, Iron, Tensor,...). Custom APS Urethane Formula for ultra-performance and sweet rebound. 975" Diameter x .4" High (24.77mm Dia x 10.2mm High). We recommend using those Short Street bushings road side, matching with Street Bushings board side. Sold as a pair of 2 bushings with washer cup</p>
                                                  Price €9.50
                                                  product name

                                                      Riptide Barrels KranK Longboard Bushings

                                                      <p>Riptide Krank barrel bushings. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! <strong>Set of 2 bushings(for one truck)</strong></p>
                                                      Price €11.50
                                                      product name

                                                          Riptide Tall Cones APS Longboard Bushings (For one truck)

                                                          <p>Tall Cones bushings would fitspecifics trucks such as Ronin, Rogue, Arsenal, Bear Kodiak,... The cone shape would let you turn deeper and works great for carving. APS is a lively and responsive, high-performance urethane with just the right amount of rebound. Very linear in response so you can control the bushing instead of the other way around. <strong>Set of two bushings (For one single truck)</strong></p>
                                                          Price €10.95
                                                          product name

                                                              Riptide Waterborne Surfskate Adapter APS Front Bushing

                                                              <p>Riptide APS formula bushing for Waterborne Surfskate adapter (front). Let's adjust your Waterborne setting to perfectly dial to your weight and style. Durometers from 87.5A (Very soft) to 97.5A (Hard). Made in USA</p>
                                                              Price €6.95
                                                              product name

                                                                  Riptide Canon KranK Longboard Bushings

                                                                  <p>Riptide Krank Canon bushings. Barrel shape with specific size for perfect fit on Paris V2 Trucks. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! Set of 2 bushings(for one truck)</p>
                                                                  Price €11.50
                                                                  product name

                                                                      RipTide FatCones APS Longboard Bushings

                                                                      <p><span>Riptide Fat Cones have the same initial stability as a Barrel but as you lean, they offer progressively higher resistance the further you go.  <span>The Barrel / FatCone setup</span><span> is for those looking for higher stability at higher speeds but still highly maneuverable for slides, high speed carving and downhill applications.  This setup is ideal when you need to restrict the ends of the lean to prevent wheelbite or if you just like a more progressive feel to your setup. APS Formula. Set of 2 bushings with washers</span></span><strong></strong></p>
                                                                      Price €11.50
                                                                      product name

                                                                          Riptide Tall Barrels KranK Longboard Bushings

                                                                          <p>Riptide Krank Tall barrel bushings. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! Those cushions are specific taller size, made to fit the following trucks: Ronin, Rogue, Arsenal, Bear Kodiak,.. <strong>Set of 2 bushings(for one truck)</strong></p>
                                                                          Price €13.95
                                                                          product name

                                                                              Independent Standard Cylinder Skateboard Bushings

                                                                              <p>Independent Standard Cylinder Bushings.<strong> </strong><span style="font-family:Arial, Helvetica, sans-serif;font-size:12px;line-height:normal;">Made with an Exclusive High-Rebound Formula that improves grind clearance and adjustability when used with the included washers. <span>Properly sized to fit Independent trucks</span>(also fit most skateboard trucks: Venture, Iron, Destructo, Thunder,...) Includ 4 Bushings(For 2 Trucks).</span></p>
                                                                              Price €9.95
                                                                              product name

                                                                                  RipTide Tall Fat Cones APS Longboard Bushings

                                                                                  <p>RipTide Tall Fat Cones has the circumference of a barrel where the bushings sit on the truck, and then gradually widens to the size of a chubby where the washers sit. This gives you the ability to get more lean than a chubby, while giving you progressive resistance the more you turn. APS Urethane. Tall bushings are specificly made for Ronin, Rogue, Bear Kodiak trucks. <strong>Set of two bushings</strong></p>
                                                                                  Price €13.95
                                                                                  product name

                                                                                      Riptide Cones KranK Longboard Bushings

                                                                                      <p>RipTide Cones are a classic shape for carving and slalom. It ensure a maximum turnability and rebound. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! Set of 2 bushings(for one truck)</p>
                                                                                      Price €11.50
                                                                                      product name

                                                                                          Seismic Tall Barrels Defcon Bushings (2 Pces)

                                                                                          <p>Seismic Tall Barrels precision fit longboard Bushings made from Defcon high rebound Formula. Made from the same compound used on the world fastest wheels. Seismic Barrel bushings are a best for downhill &amp; freeriding. You will enjoy: Deeper lean and truer more fluid steering; Smoother, more linear resistance profile; Very calm &amp; predicatble at speed; Smooth &amp; controlled return to center. Fit many longboard precision race trucks: Rogue, Ronin, Zealous, Skoa, Valkirie, Don't Trip,... <strong>Set of 2 bushings</strong></p> <p></p>
                                                                                          Price €16.95
                                                                                          product name

                                                                                              Venom Caliber Plug Barrel/ Cone HPF Longboard Bushings

                                                                                              <p>Venom Plug Barrel/cone combo Bushings for Caliber Trucks(Also Fit Bear Grizzly Gen- &amp; Randal III) are designed to remove lateral play from the truck by filling the gaps between the hanger and the kingpin. Resulting in a quicker return to center, increased responsiveness, and a more direct turning feel over a traditional barrel bushing. Now available in 5 different durometers in Venom's classic HPF formula! 1 set= 2 bushings</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/HcQY55vIVbE" title="YouTube video player" frameborder="0"></iframe></p>
                                                                                              Price €14.95
                                                                                              product name

                                                                                                  RipTide Chubby APS Longboard Bushings (Set of two)

                                                                                                  <p>Riptide Chubby APS step barrel bushings. The hallmark of this shape is its stability - provides an extremely stable platform boardside. Progressive resistance to lean but still very supple. Works well with restrictive, as well as non-restrictive, bushings seats. Supplied with stainless steel fender washers. <strong>Set of 2</strong></p>
                                                                                                  Price €11.50
                                                                                                  product name

                                                                                                      Riptide Waterborne Rail Adapter APS Surfskate Bushings (4 Pces)

                                                                                                      <p>Set of 4 Riptide Bushings for Waterborne Surfskate rail adaptor (rear truck). APS Formula. Choose from 5 durometers ranging from 87.5A (softer) to 97.5A (harder) and thus fine-tune the setup of your Waterborne surfskate according to your weight and riding style. Pack of 4 0.6" height cushions (2 barrels + 2 cones)</p>
                                                                                                      Price €21.95
                                                                                                      product name

                                                                                                          Venom Tall Keg HPF Longboard Bushings

                                                                                                          <p>Venom Tall Keg HPF shape is designed to give more progressive resistance and rebound than a barrel, but without the hard stop of a normal stepped bushing. Ideal for use on the board-side, especially if you want to go to a softer setup without losing stability. Just think of it as a barrel, but with that thicky-thicc-thicc as Nelly would say. <strong>Set of two</strong></p>
                                                                                                          Price €14.95
                                                                                                          product name

                                                                                                              Venom Caliber Plug Barrels HPF Longboard Bushings

                                                                                                              <p>Venom Plug Barrels Bushings for Caliber Trucks (Also fit Bear Grizzly Gen6 &amp; Randal III) are designed to remove lateral play from the truck by filling the gaps between the hanger and the kingpin. Resulting in a quicker return to center, increased responsiveness, and a more direct turning feel over a traditional barrel bushing. Now available in 5 different durometers in Venom's classic HPF formula! 1 set= 2 bushings</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/HcQY55vIVbE" title="YouTube video player" frameborder="0"></iframe></p>
                                                                                                              Price €14.95
                                                                                                              product name
                                                                                                              • -50%
                                                                                                              • -50%
                                                                                                              • -50%
                                                                                                              • -50%

                                                                                                              RipTide Cubes APS Bushings

                                                                                                              <p>RipTide Cubes Bushings, specialy made for specific square bushings sits Rey Trucks, allow you to change the feel of your ride simply by altering the orientation of the bushing in the bushing seat! <strong>Set of two bushings</strong></p>
                                                                                                              Regular price €9.50 -50%Price €4.75
                                                                                                              product name

                                                                                                                  Seismic Standard Barrels Defcon Bushings (2 Pces)

                                                                                                                  <p>Seismic Standard Barrels precision fit longboard Bushings made from Defcon high rebound Formula. Made from the same compound used on the world fastest wheels. Seismic Barrel bushings are a best for downhill &amp; freeriding. You will enjoy: Deeper lean and truer more fluid steering; Smoother, more linear resistance profile; Very calm &amp; predicatble at speed; Smooth &amp; controlled return to center. Fit most longboard trucks: Paris, Caliber, Bear Grizzly Gen6, Atlas,... <strong>Set of 2 bushings</strong></p>
                                                                                                                  Price €14.95
                                                                                                                  product name
                                                                                                                  • New
                                                                                                                  • New

                                                                                                                  Riptide Street Barrel/ Cone Krank Skateboard Bushings (4 Pces)

                                                                                                                  <p>Riptide Street Barrel/Short Street Cone Bushing Kit Krank formula. Combines stability and agility. Bushings specially designed for skateboards &amp; cruisers truck (Independent, Venture, Thunder, Iron, Tensor, Bear Polar, Enuff...), also compatible with Yow trucks. Riptide bushings are of excellent quality and enhance truck performance by adjusting to weight and riding style. The Krank formula reacts to clamp pressure to provide optimal adjustment for each individual. Quick return to the initial position. <strong>Set of 4 bushings and cups (for 2 trucks).</strong></p>
                                                                                                                  Price €21.95
                                                                                                                  product name

                                                                                                                      RipTide Paris Magnum APS Longboard Bushings(For 1 Truck)

                                                                                                                      <p>The magnum bushings are an adaptation to Riptides Chubby Bushing sized specifically for the seat of Paris Trucks.</p> <p>Set of two bushings (For one truck)</p>
                                                                                                                      Price €11.50
                                                                                                                      product name

                                                                                                                          RipTide Barrels WFB Longboard Bushings

                                                                                                                          <p>The Barrels are a classic shape for Downhill and freeriding. It ensure a maximum of stability at high speed. Set of two (For ine truck)</p>
                                                                                                                          Price €11.50
                                                                                                                          product name

                                                                                                                              Venom SHR Super Carve Bushings

                                                                                                                              <p>Set of 2 High Rebound Venom Super Carve conical bushings, made for carving in mind</p>
                                                                                                                              Price €11.95
                                                                                                                              product name

                                                                                                                                  RipTide Fat Cones Krank Longboard Bushings

                                                                                                                                  <p><span>Riptide Fat Cones have the same initial stability as a Barrel but as you lean, they offer progressively higher resistance the further you go.  <span>The Barrel / FatCone setup</span><span> is for those looking for higher stability at higher speeds but still highly maneuverable for slides, high speed carving and downhill applications.  This setup is ideal when you need to restrict the ends of the lean to prevent wheelbite or if you just like a more progressive feel to your setup. Krank Formula. Set of 2 bushings with washers</span></span></p>
                                                                                                                                  Price €15.50
                                                                                                                                  product name
                                                                                                                                  • New
                                                                                                                                  • New

                                                                                                                                  Riptide Short Street Cones Krank Skateboard Bushings

                                                                                                                                  <p>Riptide Short Street Cones Skateboard Truck Bushings, Krank Formula. Compatible with most street trucks: Independent, Venture, Thunder, Tensor, Iron, etc. High-performance formula that significantly improves truck performance and allows adjustment based on weight or riding style. Diameter 24.77mm x Height 10.2mm. Typically placed on the road side. For the board side, we recommend the Streets. The Krank bushing responds to tightening pressure to best adjust to each rider. Quick return to the initial position. Sold in pairs (2 bushings) with washers.</p>
                                                                                                                                  Price €11.50
                                                                                                                                  product name
                                                                                                                                  • New
                                                                                                                                  • New

                                                                                                                                  Riptide Short Street Barrels Krank Skateboard Bushings

                                                                                                                                  <p>Riptide Bushings Krank Formula Short Street Size for Skateboard &amp; Cruiser Trucks. Compatible with Independent, Tensor, Thunder, Venture, Bear Polar, Mini Logo,... Placed on the road side in addition to a Street size bushing (sold separately). The barrel shape provides maximum stability and reduces lean. We recommend the Riptide Street Barrels as a complement on the board side. The Krank bushing adjusts to pressure from tightening to best suit each rider. Fast return to the initial position. Hardness from 84A (softer) to 96A (harder). <strong>Pack of 2 bushings and 2 flat washers.</strong></p>
                                                                                                                                  Price €11.50
                                                                                                                                  product name

                                                                                                                                      Venom Eliminators HPF Longboard Bushings

                                                                                                                                      <p>The Venom Eliminator HPF longboard bushings, with their relatively original shape, allow you to turn deeper, while being ultra stable in a straight line. The HPF compound (High Performance Formula), has a little less rebound than the SHR formula, and is more suitable for downhill and freeride practices. <strong>Pair of two bushings</strong></p>
                                                                                                                                      Price €13.95
                                                                                                                                      product name
                                                                                                                                      • -20%
                                                                                                                                      • -20%
                                                                                                                                      • -20%
                                                                                                                                      • -20%

                                                                                                                                      Sabre Cones bushings

                                                                                                                                      <p>Set of two Sabre cones bushings (for one trucks). Cones bushings are reactive and allow a maximum lean.</p>
                                                                                                                                      Regular price €9.95 -20%Price €7.96
                                                                                                                                      product name

                                                                                                                                          Venom Eliminators SHR Longboard bushings

                                                                                                                                          <p>Venom Bushings is champion's Zak Maytum own brand. Very high quality rubber with maximum rebound for stability in all conditions. The Eliminator bushing, with its relatively original shape, allows you to push your turns deeper, while being ultra stable in straight lines. The Eliminator's main use is for downhill and freeriding. <strong>Set of two bushings</strong></p>
                                                                                                                                          Price €15.95
                                                                                                                                          product name
                                                                                                                                          • -40%
                                                                                                                                          • -40%
                                                                                                                                          • -40%
                                                                                                                                          • -40%

                                                                                                                                          Riot Standard Barrels Longboard Bushings

                                                                                                                                          <p>Barrel shape, the most stable shape of bushings commonly used for downhill and freeriding.</p> <p>Riot bushings are unique in the way that they are CNC machined from urethane Rods witch ensures very precise alignmentof the hanger on the baseplate.</p> <p>Set of two bushings (for one truck)</p>
                                                                                                                                          Regular price €16.00 -40%Price €9.60
                                                                                                                                          product name

                                                                                                                                              RipTide Street Chubby APS

                                                                                                                                              <p>Set of two RipTide Street Chubby APS Bushings specialy made to fit on Independent trucks</p> <p>Include 2 bushings and 2 flat washer rings</p>
                                                                                                                                              Price €11.50
                                                                                                                                              product name

                                                                                                                                                  Carver CX & C5 Cones / Cones Bushings Set

                                                                                                                                                  <p>Replacement Bushing Set for Carver CX &amp; C5 Surfskate Trucks. Cone-shaped bushings with lower hardness than the original Carver truck bushings (89A). More rebound. These Carver bushings will enhance your agility. Available in 81A (soft) and 84A (medium). <strong>Set includes 4 bushings and 2 kingpin nuts.</strong></p>
                                                                                                                                                  Price €14.95
                                                                                                                                                  product name

                                                                                                                                                      Riptide Tall Cones Krank Longboard Bushings

                                                                                                                                                      <p>Tall Cones bushings would fitspecifics trucks such as Ronin, Rogue, Arsenal, Bear Kodiak,... The cone shape would let you turn deeper and works great for carving. Riptide highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the kingpin nut!. <strong>Set of two bushings (For one single truck)</strong></p>
                                                                                                                                                      Price €13.95
                                                                                                                                                      product name

                                                                                                                                                          Riptide Penny Barrel/ Cone APS Bushings (4 Pces)

                                                                                                                                                          <p>Riptide Street Barrels/ Cones bushings combo speciflicly deisigned to fit Penny cruiser's trucks. APS Formula. Those bushings are a real upgrade for your cruiser's trucks. The high quality urethane range from 75A(softer) to 90A(Medium). Barrel/ Cone combo is a good mix between stabily and agility. Heights: Barrel 0.55" / Cone 0.5". <strong>Set of 4 cushions.</strong></p>
                                                                                                                                                          Price €18.95