FREE SHIPPING from 70€ France & Belgium / 190€ UE and Swiss

Showing 1-35 of 35 item(s)
8mm Axles Speed rings...
<p>Speed rings to fit on standar 8mm axles.</p> <p>Match with most trucks: Paris, randal, Caliber, Tracker, Independant, Seismic, Gullwing, gunmetal,...</p> <p>Set of 4 speed rings (For one truck)</p>
Roll Line Kingpin nut...
<p>Roll Line Kingpin nut locking screws for Blaster/Killer/Variant plates. Set of two(for one plate)</p>
Price €2.00
Bearing spacers 8 X...
<p>Specific 8X8mm aluminium bearings spacers. <span style="color:#d0121a;">Only match with Roller quad wheels and Kryptonic</span>, Cadillac, and Gravity (models 2005 and before) wheels. To be used with 8mm axles. The spacers will help keeping the bearings in place into the wheels, improving your riding precision. Set of four spacers</p>
Axles Nuts & Speed...
<p>Set of 4 replacement axles nuts & 8 Speed rings for standard 8mm axles</p>
Roll Line Toe Stop...
<p>This Roll Line toe stop screws will allow you to keep your stoppers in place on most Roll Line plates. <strong>Set of two srews</strong></p>
Sure-Grip Lock Washers...
<p><span>Washers used on the pivot pin to help secure the pin from moving in and out. This is a necessary part when using a truck with an adjustable pivot pin such as Sure-Grip Avenger, Avanti Magnesium,... 4Pk</span></p>
Price €2.00
Roller Quad Toestop...
<p>Roller Quad Toestop bolts(Set). To be use with bell type stoppers. Diameter 5/16". <strong>Set of 2 bolts</strong></p>
5/8" Stopper Nuts &...
<p>5/8" Stopper Nuts & Washers Set. For locking your 5/8" adjustable stopper to your skate plate. Can be use one Powerdyne Thrust/Triton/Dynapro plates, and Sure Grip plates. Not compatible with plates using bell stopppers or the ones that required Allen key to tighten stoppers. <strong>Set of 2 nuts and 2 washers(For both plates)</strong></p>
Powerdyne Mounting...
<p>Mounting Hardware set for Roller Skates. Must be use with hard sole shoes such as Roller Derby and Artistic boots. Include bolts 12 bolts(8x3.5m + 4x6.9cm) with washers and nuts.</p>
Price €8.95
Powerdyne Thrust...
<p>Powerdyne Stopper Insert for Powerdyne Thrust plates. Thrust are the nylon plates who usually comes factory mounted on Riedell R3, Dart, She Devil, Vandal rollerskates. Sold individualy</p>
Roll Line Mounting...
<p>Roll Line Mounting Hardware for Roller Skates. Roll Line bolts are diameter 3.5mm, witch is a little bit thinner than the US standard. This hardware is matching with the Roll line plates holes. Set of 12 Bolts(4 long+8 short) with nuts and washers.</p>
Roll Line Ecrous de...
<p>Roll Line Ajustement Kingpin nuts for Variant, Blaster, & Killer plates. Set of two(for one plate)</p>
Price €2.00
Powerdyne Toe Stop...
<p>Powerdyne Toe Stop Screws. Match with Powerdyne Falcon & Revenge plates; Roll Line plates all models exept Mirage. Set of 2 screws</p>
Price €3.50
Roll Line Bearing...
<p>Roll Line Bearing Spacers 7x9mm(4 Pk). Diameter 7mm, width 9mm. Those spacers are not standard and are <strong>specifics to Roll Line Wheels</strong> <strong>and 7mm axles</strong>. Set of 4 spacers(for 4 wheels)</p>
Roll Line 7mm Metric...
<p>7mm Metric self locking Axle Nuts for roller skates. <strong><span style="color:#d0121a;">Only fit European plates using 7mm metric thread axles.</span></strong> <strong>Set of 8</strong></p>
Powerdyne Kingpin for...
<p>Powerdyne Kingpin for Thrust / Triton / DynaPro plates. Sold individualy</p>
Price €2.50
Bont Kingpin nut...
<p>Bont Kingpin nut locking screws for Athena plates. Set of two(for one plate)</p>
Price €4.00
Chaya Kingpins 52mm...
<p>Chaya roller skate spare parts. Aluminium Kingpins 52mm lenght. Made to fit Chaya Shari & Galaxy Plates. Set of 4 kingpins without nuts</p>
Price €11.95
Sure-Grip Zero Nuts...
<p>Suregrip Zero Nuts are the lightest after market axle nuts and are made for standard 8mm(1/2") axels. Zero Nuts are adding a colorful touch to your roller skates. They will also helps the long lasting of your bearings by protecting them from the dust. <strong>Pack of 8 Nuts</strong></p>
Bont Ignite Mounting...
<p>Bont Ignite Roller skate Mounting Hardware. Including 4 long bolts, 4 short bolts, 8 self locking nuts</p>
Price €14.00
Roll Line Click Action...
<p>Set of 4 kingpin nuts for Roll Line plates with Click Action Sytem: Killer(Steel & Titanium), Mistral, Energy(Steel & Titanium), Dance, Matrix(Steet & Titanium), Evo, Raffaello, Ring, Saturno, Giotto, Spin Variant C</p>
Price €14.95
Pilot Toe Stop Locking...
<p>This Pilot toe stop screws will allow you to keep your stoppers in place on Pilot Falcon plates. <strong>Set of two srews</strong></p>
Price €2.50
Roller skates Mounting...
<p>These mounting nuts keep your plates on your skates! It is very important to make sure these are all on your skates. size 10/32" compatible with standard mounting bolts. <strong>Pack of 8 self locking nuts</strong></p>
Price €1.95
Sure-Grip Toe Stop...
<p>This Sure-Grip toe stop screws will allow you to keep your stoppers in place on most Sure Grip plates. Only compatible with the following plates: Avanti, Avenger, Competitor, Cenury, Classic, Cyclone, Magnum, Invader. <strong>Set of two srews</strong></p>
Price €2.50
Discoblox Radius...
<p>Kit for making Discoblox fit onto plates with tapered kingpins such as Powerdyne Reactor, Revenge and Rival. Kit comes with 4 washers and 4 trimmed cushions in either 88a or 93a.</p>
Price €39.95
Roll Line Click Action...
<p>Click Action washer cups. Fits any Roll Line plates using the click action system: Killer(Steel & Titanium), Mistral, Energy(Steel & Titanium), Dance, Matrix(Steet & Titanium), Evo, Raffaello, Ring, Saturno, Giotto, Spin. Set of 4 wahers</p>
Price €12.95
Powerdyne Arius Toe...
<p>Powerdyne Arius Toe stop screws. This screw keep the Toe Stop of the POWERDYNE Arius Plate locked. built in washer. <strong>Sold in pairs</strong></p>
Price €4.00
Chaya Grind Block...
<p><span class="field_value is_big_string">The Chaya aluminum adapter is a tuning tool that helps you to turn your Chaya roller skate into a park skate. The adapter fits Chaya Shiva and Ophira plates and will fit the 2nd generation of Chaya Zena plates as well as SNEEKRSKATE plates. Chaya grind blocks can be easy assembled by a single screw to the adapter and off you go for your park skating session. </span></p>
Price €14.95
5/8" Stopper Washers Set
<p>5/8" Stopper Washers Set. For locking your 5/8" adjustable stopper to your skate plate. Can be use one Powerdyne Thrust/Triton/Dynapro plates, and Sure Grip plates. Not compatible with plates using bell stopppers or the ones that required Allen key to tighten stoppers. <strong>Set of 2 washers(For both plates)</strong></p>
Price €2.50
Roll Line King Pin for...
<p>Roll Line Variant 13mm King Pin for Roll Line Blaster, Variant and Killer plates</p>
Price €4.50
- Out-of-Stock
Bont Ignite Stopper...
<p>Bont Stopper Insert for Bont Ignite plates. Ignite are the composite plates who usually comes factory mounted on Bont Quadstars and Prostars. Sold individualy</p>
Price €3.00
- Out-of-Stock
Bionic Mounting...
<p>Mounting Hardware set for Roller Skates. Must be use with hard sole shoes such as Roller Derby and Artistic boots. Include 12 phillips head bolts(8x3.5m + 4x6.9cm) with washers and nuts.</p>
Price €7.00
New products
- New
Harfang Claw Snowskate...
<p>Harfang Claw Snowskate trucks. Standard height. fiberglass reinforced plastic base plate, single pivot point technology, powder coated steel top part. Fit most snowskate sub-decks such as: Harfang, Hovland, Landyachtz, Boyd Hill... If you are looking for more leverage for freeriding and/or steeper hills, we would recommand to add an additional 1/2" riser pad. Made in Canada. <strong>Set of 2 Trucks with sub-deck mounting hardware(Top deck mounting hardware not included)</strong></p>
Price €59.95
- New
Hovland Buckshot Sword...
<p>Hovland Buckshot 126cm Sub deck. Polar core with Triaxial Fiberglass. It is fully wrap with stainless steel edges and has urethane siewalls. 5 inserts setup options(matching with Bear and Harfang Trucks). The Buckshot handles everything from ice, to groomers, to a couple feet of pow. If you’re not super park focused, and want to be able to skate your whole mountain, this is the snowskate you’re looking for. Ski width: Nose 19.5cm/ waist 12.5cm / Tail 13.4cm</p> <p></p>
Price €319.95
- New
Creature Horde Script...
<p>Creature Horde Script 8.25"x32.04". Graphic by Ken Davis. Standard popsicle shape with Medium concave. 7 Ply Hard rock maple from North America. "Hard Rock Maple" trees grow in the arctic freeze zones of the planet, so with temperatures like that, you know these boards are stiff. Great wood at a great price for any type of skater. Set with Jessup black griptape, Tensor Alloys 5.5" Trucks, Abec 7 Bearings, 52mm Wheels</p>
Price €114.95
