FREE SHIPPING from 70€ France & Benelux / 130€ Germany, Italy, Portugal & Spain / 190€ other EU countries & Swiss
Riptide Tall Barrels KranK Longboard Bushings
Riptide Krank Tall barrel bushings. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! Those cushions are specific taller size, made to fit the following trucks: Ronin, Rogue, Arsenal, Bear Kodiak,.. Set of 2 bushings(for one truck)
€13.95
Tax included
Free shipping from 70€ France & Belgium / 190€ UE & Swiss
Secure Payment
30 Day return policy
Riptide Krank Tall barrel bushings. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! Those cushions are specific taller size, made to fit the following trucks: Ronin, Rogue, Arsenal, Bear Kodiak,.. Set of 2 bushings(for one truck)
RTIDE-TBARREL-KRANK87
- Bushings Heights & Shapes
- Barrel, Longboard Tall Height
Specific References
8 other products in the same category:
<p>RipTide Cones are a classic shape for carving and slalom. It ensure a maximum turnability and rebound. <strong>Set of two (For one truck)</strong></p>
Venom Downhill Barrels HPF Longboard bushings
<p>Venom Downhill Barrels bushings HPF (High Performance Fomula). Those bushings will help you being more stable at speed and are one of the most popular option for DH & Freeriding. Large range of durometers ranging from 73A (extra soft) to 97A (Extra Hard). Venom is a Zak Maytum own compagnie. Made in USA. <strong>Set of Two cushions (For 1 truck)</strong></p>
RipTide FatCones APS Longboard Bushings
<p><span>Riptide Fat Cones have the same initial stability as a Barrel but as you lean, they offer progressively higher resistance the further you go. <span>The Barrel / FatCone setup</span><span> is for those looking for higher stability at higher speeds but still highly maneuverable for slides, high speed carving and downhill applications. This setup is ideal when you need to restrict the ends of the lean to prevent wheelbite or if you just like a more progressive feel to your setup. APS Formula. Set of 2 bushings with washers</span></span><strong></strong></p>
Orangatang Nipples Longboard Bushings
<p>Set of 4 barrels bushings poured out of the same urethane as the Orangatang wheels</p>
Independent Standard Cylinder Skateboard Bushings
<p>Independent Standard Cylinder Bushings.<strong> </strong><span style="font-family:Arial, Helvetica, sans-serif;font-size:12px;line-height:normal;">Made with an Exclusive High-Rebound Formula that improves grind clearance and adjustability when used with the included washers. <span>Properly sized to fit Independent trucks</span>(also fit most skateboard trucks: Venture, Iron, Destructo, Thunder,...) Includ 4 Bushings(For 2 Trucks).</span></p>
Riptide Street Cones APS Skateboard Bushings
<p>Riptide Street Cones APS Bushings. Sized to fit properly in conventional "Indy-style" trucks(Independent, Venture, Thunder, Iron, Tensor,...). Custom APS Urethane Formula for ultra-performance and sweet rebound. 975" Diameter x .5" High (24.77mm Dia x 12.7mm High). We recommend using those Street bushings board side, matching with Street Short Bushings road side. The Cone's shape is turnier and will let you turn deeper. Sold as a pair of 2 bushings with washer cup</p>
Price €9.50
RipTide Tall Barrels APS Longboard Bushings (For one truck)
<p>Tall Barrels bushings specialy made for Ronin trucks (Cast and Billet). The barrel shape ensure maximum stability for speed and downhill use. APS Urethane. Fit Ronin Trucks, Arsenal Trucks, Bear Kodiak, Rogue,... <strong>Set of two bushings (For one single truck)</strong></p>
Riptide Carver CX/C5 APS Bushings
<p>Riptide Bushings for Carver CX & C5 Surfskate Trucks. Designed with perfect shape and dimensions to optimize Carver trucks performance. Riptide APS Bushings are available in 5 hardness levels ranging from 85A (softer) to 95A (harder) to meet everyone's expectations. Cone shape, 0.65" (16.5mm) height on the board side and 0.58" (14.7mm) height on the road side. These bushings are comfortable and does not squeeze noise. <strong>Sold in sets of 2 (for one truck).</strong></p>
Customers who bought this product also bought:
8mm Axles Speed rings (4 Pk)
<p>Speed rings to fit on standard 8mm axles. To be placed between the hanger and the inner bearing, / between the outter bearing and the axle nut. Match with most trucks. <strong>Set of 4<br /></strong></p>
Rocket Dark Matter Longboard Griptape(4 Sheets)
<p>Dark Matter Griptape has a unique backing that won't come off easily since it is heat resistant and the edges won't tear or flake. The grains of the griptape are smaller but sharper and won't wear out over time and will grip even when wet. The grip is developed and teste by the Rocket scientists. <strong>This pack includes: </strong>3 Sheets (32cm x 26cm / 12.6" x 10.2" + 1 Sheet (10cm x 26cm / 4" x 10.2")</p> <p></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/BIAVctQsqjs" title="YouTube video player" frameborder="0"></iframe></p>
Riptide PSD InSide Clear Foot Stop
<p>The PSD foot stops are made out of extra hard urethane by the renown bushings company RipTide.</p> <p style="margin-bottom:0cm;">The foot stop helps you keeping your front foot in locked place while sliding or cornering.</p> <p style="margin-bottom:0cm;">Sold as one foot stop including a long bolt</p>
Riptide Tall Cones Krank Longboard Bushings
<p>Tall Cones bushings would fitspecifics trucks such as Ronin, Rogue, Arsenal, Bear Kodiak,... The cone shape would let you turn deeper and works great for carving. Riptide highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the kingpin nut!. <strong>Set of two bushings (For one single truck)</strong></p>
Bearing spacers 8 X 10mm (Set of 4)
<p>Standard skate bearings spacers. To be used with 8mm axles. Fit on most skateboard and longboard wheels. The spacers will help keeping the bearings in place into the wheels, improving your riding precision. Set of four spacers</p>
Caliber III 44° 158mm Raked Longboard Truck (Single)
<p>Ride like never before with the Caliber III Raked Longboard Truck! This is the 5mm Raked version of the Caliber III which provides increased turn and generally more lively feeling ride. Comes with a narrower hanger of 158mm (9") and 44° baseplate making it more stable at speed for downhill & Freeriding. Caliber III 44° are set with Venom Plug Barrel / Barrel 90A HPF Bushing, and 96A Urethane pivot cups. <strong>Sold singely</strong><strong></strong></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/tnnwIW5UFKw" title="YouTube video player" frameborder="0"></iframe></p>
Price €42.95
RipTide Paris Canon APS Longboard Bushings(For 1 Truck)
<p>The Canon bushings are the equivalent to Riptides standard Barrel Bushing sized specifically for the seat of Paris Trucks.<strong> Set of two bushings</strong></p>
Cult Emperor 71mm Longboard wheels
<p>The concept for this Cult Emperor is a faster freeride wheel...one that gives you a little more grip when you need it but still has a really smooth slide characteristic and is easy to break into a slide when you want to. <strong>Set of four wheels</strong></p>