<p>All in one starter pack for teenager beginner skateboarder. Including an Aloiki Zicatela 7.75"x31.6" skateboard and a complete set of TSG Safety equipements: Helmet, Knee &amp; Elbow pads, Wristguards. The board has a Medium Concave and is set with black griptape, Classic 5" Trucks, Abec 5 Bearings, 52mm 100A hard Wheels. 7 Plies Hard rock maple.</p>

<p>Speed rings to fit on standard 8mm axles. To be placed between the hanger and the inner bearing, / between the outter bearing and the axle nut. Match with most trucks. <strong>Set of 4<br /></strong></p>

<p>Standard replacement nut to fit on skateboard truck kingpin. Sold per piece</p>

<p>Set of eight Zealous built in spacers and speed rings bearings for standard 8mm axles trucks. Good value</p>

<p>Dark blue extra wide skateboard griptape. Standard grit. Width 11". Sold per 10cm</p>

<p>The S1 Lifer is one of the best fitting and safest helmets for skateboarding, BMX, and Roller Derby. It uses a special formulated EPS fusion foam wich allows it to protect the head from multiple low force impacts as well as high impacts. Color: Black Matte</p> <p></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/Hnp4ht0AnUg" title="YouTube video player" frameborder="0"></iframe></p>

<p>Independent skateboard mounting hardware. Phillips flat head. Set of 8 bolts &amp; nuts</p>

<p>Jessup Ultragrip White 11" Griptape. Wide enough to fit any skateboard or longboard. Slightly sharper grits to compare with Jessup Regulare. Easy to instal. Sold per 10cm, order 10 to get an 100cm long sheet</p> <p></p>

<p>Abec 7 Skateboard &amp; Roller skate bearings type 608. Fit on most wheels and trucks. Steel balls and nylon shields on both sides. The highest quality that you can get for this value. Set of 8 Bearings(for 4 wheels)</p>

<p style="margin-bottom:0cm;">Set of eight Longboard skateboard mounting Bolts, nuts, and washers(no washer with 2" bolts sets). Phillips Button Sockets bolts. Can be use on drop through and top mount settings</p>

<p>Set of two skateboard's flat shock pads 1/8" (3mm) depth. Helps reduce vibrations and avoive wheel bites.</p>

<p>Replacement axles nuts for standard 8mm axles.</p> <p>Set of four</p>

<p>Neon Green extra wide skateboard griptape. Standard grit. Width 11". Sold per 10cm</p>

<p>Standard skate bearings spacers. To be used with 8mm axles. Fit on most skateboard and longboard wheels. The spacers will help keeping the bearings in place into the wheels, improving your riding precision. Set of four spacers</p>

<p>Set of two skateboard's flat shock pads 1/4" (6mm) depth. Helps reduce vibrations and avoive wheel bites.</p>

<p>Bushings cup washers. Set of two</p>

<p>The Tensor Alloys is a durable truck to stand up to hard riding and tons of grinding. The aluminium cast<strong></strong> allows you a more consistant board feel when your throwing it round, with the more traditional weight being easier to pull you through your carves in the bowl. The Tensor Alloys are a quality truck at an awesome price point, perfect for your first custom set up. 5.25" is the size you need to set a deck width 7.87" to 8.125". <strong>Truck sold individually, buy 2 to get a full set</strong></p> <p></p> <p></p>

<p>Jessup Black 11" Longboard griptape. Sold per 10cm</p>

<p>Jessup is the number one seller for skateboarding grip tape. Solid and easy to stick. 9" is what you need on your street deck. Product is sold per 10cm. Buy 10 to get one meter.</p>

<p>Tensor skateboard mounting kit. Includ a set of Tensor Alloy 5", 1 set Abec 7 Bearings; 1 set 51mm 101A wheels, &amp; mounting bolts. Best fit decks width 7.4" to 7.75". Value pack for beginners</p>

<p>Beginner skateboard pack including a Globe G0 8" x 31.625" skateboard &amp; a full set of TSG pads: Helmet, Knee &amp; Elboaw pads, Wristguards. Regular Adult size</p>

<p>Santa Cruz Screaming Hand Skateboard. Size 8"x31.6", Wheelbase 14.22". Medium Concave, Standard Popsicle shape. 7 Plies US Hard Maple. Santa Cruz Skate Co. Since 1973. Set with Bullet Trucks, Abec 3 Bearings, OJ Wheels 53mm 97A. Great pack for intermediate to expert riders</p>

<p>Riptide Street Barrels/ Short Street Cone combo in APS Formula. Those bushings are a real upgrade for your skateboard trucks. The high quality urethane range from 60A(extremly soft) to 97.5A(Hard), so no matter if you are a yound kid or a fat old guy, you will get the duro that you need. Barrel/ Cone combo is a good mix between stabily and agility. Fit most " indy style" conventional trucks(Indepedendent, Venture, Tensor, Iron, Thunder,...) <strong>Set of 4 cushions with cup washers.</strong></p>

<p>Skateboard beginner stater pack including a skateboard and a full set of TSG Safety gears: Helmet, Knee &amp; Elbow pads, Wrist guards. The Aloiki Aztec skateboard is 8"x31.85", with a Medium Concave. Board is set with black griptape, Classic 5" Trucks, Abec 7 Bearings, 52mm 100A Hard Wheels. 7 Plies Hard rock maple. This Skateboard size would fit most adult &amp; teenager skateboarders.</p>

<p>Powell Peralta Geegah Skull Sword 9.75" x 30" Silver Reissue Skateboard. In 1986 jump ramps were all the rage. Unfortunately, decks were snapping left and right. Powell-Peralta deck returns were so high the company sought ways to make decks stronger and more resistant to jump breaks. One solution was Bonite construction. Another was the "Gee-Gaw" shape which had bumps to reinforce the break zone area. This shape was originally produced between 1987 and 1988. Single pressed with 7 ply US maple and premium glue. Premium set with Jessup Griptape, Independent Trucks, Bones Redz Bearings, Powell Rat Bones 60mm Wheels</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/99QdKTRd8w8" title="YouTube video player" frameborder="0"></iframe></p> <p></p>

<p>Skateboard mounting kit. Includ a set of Tensor Alloy 5.25", 1 set Abec 7 Bearings; 1 set 52mm 99A wheels, &amp; mounting bolts. Best fit decks width 7.87" to 8.125". Value pack for beginners</p>

<p style="margin-bottom:0cm;">Set of eight skateboard mounting Bolts and nuts. Phillips Flathead. Sizes: 1"= 2,54cm; 1 1/8"= 2,85cm ; 1.1/4"=3,17cm ; 1.1/2"=3,81cm ; 2"=5,08cm</p>

<p>Santa Cruz Screamling Hand Premium Skateboard. Size 8.25"x31.8". Medium Concave, Standard Popsicle shape. 7 Plies US Hard Maple. Santa Cruz Skate Co. Since 1973. Set with Bullet 140mm Trucks, Abec 3 Bearings, OJ Wheels 53mm 97A. Great board for any adult looking to ride in bowl, Street, Skatepark, and mini ramp</p>

<p style="margin-bottom:0cm;">Set of eight skateboard mounting Bolts and nuts. Allen Flathead. Sizes: 1"= 2,54cm; 1 1/8"= 2,85cm ; 1.1/4"=3,17cm</p>

<p>Jessup ULTRAGRIP utilizes a manufacturing process which makes the grit more aggressive for extra traction. Silicon carbide particles bite your shoes for a grippier feel. Super easy application to your deck, trims without tearing, extreme durability. When you know the ride you’re looking for, we got you gripped. 9"x33" is what you need to grip one street deck.</p>

<p>Beginner skateboard starter pack. Including Globe G0 street complete and a full set of PSG pads and helmet. The Globe G0 is a classic resin-7 skateboard set with ABEC-7 Bearings, Slant Alloy 5" Trucks, and 52mm 99A Wheels. Size of 7.75" x 31" x 13.8"WB. Full concave. Would fit most teenagers for a park &amp; street use.</p>

<p>Riptide Short Street Barrels bushings. Fit most TKP  street &amp; cruisers Trucks. Use the short Street barrel road side, in addition with a <a href="https://fulkit-skateboards.com/en/bushings/4330-55726-riptide-street-barrels-aps-skateboard-bushings.html">street barrel</a> or <a href="https://fulkit-skateboards.com/en/bushings/377-558-riptide-street-chubby-aps.html">street chubby</a> board side. Barrels maximize the stabily and reduce the truck's lean. APS Formula with a large choice of durometers ranging from 60A(Very soft) to 97.5A(Very Hard). <strong>Set of 2 bushings with flat washers</strong></p>

<p>Make someone happy by offering a gift certificate valid on all our catalogue! Gift certificate is send by post mail (can be sent by e-mail on demand) and have 6 months validity from the purchase day. Value 30€TTC(25€ off taxes)</p>

<p>Riptide Street Cones/ Short Street Cones combo in APS Formula. Those bushings are a real upgrade for your skateboard trucks. The high quality urethane range from 60A(extremly soft) to 97.5A(Hard), so no matter if you are a yound kid or a fat old guy, you will get the duro that you need. Cone/ Cone combo works great if your are looking for more agility and deeper lean. Fit most " indy style" conventional trucks(Indepedendent, Venture, Tensor, Iron, Thunder,...) <strong>Set of 4 cushions with cup washers.</strong></p>

<p>Riptide Street Cones APS Bushings. Sized to fit properly in conventional "Indy-style" trucks(Independent, Venture, Thunder, Iron, Tensor,...). Custom APS Urethane Formula for ultra-performance and sweet rebound. 975" Diameter x .5" High (24.77mm Dia x 12.7mm High). We recommend using those Street bushings board side, matching with Street Short Bushings road side. The Cone's shape is turnier and will let you turn deeper. Sold as a pair of 2 bushings with washer cup</p>

<p>Set of two Angled riser Pads. 5° Wedge. 9,5mm to 14mm depth. 8 Holes. Soft duro</p>

<p><span>Longboarders well loved Zealous bearings are now available with Ceramic balls to feed speed and racing needs. </span><span>Ceramic balls are lighter, stiffer, smoother and naturally corrosion resistant. This means it can use a lower viscosity lubricant which makes them fast right out of the tube. </span><span>Precision 8mm axle holes. 0</span><span>.4045" built in spacers. 0</span><span>.5mm built in speedrings. <strong>Set of height Bearings </strong></span></p>

<p>Orange extra wide skateboard griptape. Standard grit. Width 11". Sold per 10cm</p>

<p>Powell Peralta Geegah Ripper 9.75" x 30" Maroon Reissue Skateboard. In 1986 jump ramps were all the rage. Unfortunately, decks were snapping left and right. Powell-Peralta deck returns were so high the company sought ways to make decks stronger and more resistant to jump breaks. One solution was Bonite construction. Another was the "Gee-Gaw" shape which had bumps to reinforce the break zone area. This shape was originally produced between 1987 and 1988. Single pressed with 7 ply US maple and premium glue. Premium set with Jessup Griptape, Independent Trucks, Bones Redz Bearings, Powell Rat Bones 60mm Wheels</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/99QdKTRd8w8" title="YouTube video player" frameborder="0"></iframe></p>

<p>Independent Standard Cylinder Bushings.<strong> </strong><span style="font-family:Arial, Helvetica, sans-serif;font-size:12px;line-height:normal;">Made with an Exclusive High-Rebound Formula that improves grind clearance and adjustability when used with the included washers. Double cones will helps you turn deeper. <span>Properly sized to fit Independent trucks</span>(also fit most skateboard trucks: Venture, Iron, Destructo, Thunder,...) Includ 4 Bushings(For 2 Trucks).</span></p>

<p>Flat bushings washers. Small(0.4")=&gt; Best fit with cones bushings; Large(1"): best fit with Barrel bushings. Flat washers would let you trucks lean deeper to compare with a truck using cup washers. Set of four</p>

<p>Powell Peralta complete skateboard Pro model Andy Anderson 8.45" x 31.8". Ultra innovative shape mixing old school and new school. Flat kicktail tip to facilitate pogo tricks, nose and tail of identical length, balance point in the center of the board, curvatures of the nose and tail identically dosed to facilitate flips both in natural and switch. V shape which saves weight while keeping a width equal to the level of each truck. Wheelbase 14.25"; Nose 6.68" with 18° angle; 6.68" tail with 18° angle. Premium 7-ply maple constructionThe Anderson is a killer board for those riders who like mixing old school and new school tricks</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/gg1ZMwAAcEg" title="YouTube video player" frameborder="0"></iframe></p> <p></p>

<p>Powell Peralta Caballero Chinese Dragon Brown Stain 10" x 30", is a re-issue from the 80's. Vintage shape and highest quality construction. 7-ply premium US maple. This board is a blast for old school skateboarding, bowl riding, or just cruising. Premium mpounting with Jessup Griptape, Independent Trucks, Bones Reds Bearings, Powell rat Bones 60mm Wheels</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/s8O2Fyv0-ZU" title="YouTube video player" frameborder="0"></iframe></p> <p></p>

<p>Independent skateboard mounting hardware. Phillips flat head. Set of 2 Gold + 6 Black bolts + 8 gold nuts</p>

<p>The Tensor Alloys is a durable truck to stand up to hard riding and tons of grinding. The aluminium cast<strong></strong> allows you a more consistant board feel when your throwing it round, with the more traditional weight being easier to pull you through your carves in the bowl. The Tensor Alloys are a quality truck at an awesome price point, perfect for your first custom set up. 5.5" is the size you need to set a deck width 8" to 8.25". <strong>Truck sold individually, buy 2 to get a full set</strong></p> <p></p> <p></p>

<p>Powell Peralta Buky Lasek skateboard deck reissue. Originaly released in 1990.  Wide 10" x 31.5" transition double kick shape. Double kicks, Medium concave, 7-ply premium US maple. Artwork by Sean Cliver. WB 14.5"-13.75". Premium setting with Black Jessup Griptape, Independent 169mm Trucks, Bones Redz Bearings, Powell G Bones 64mm 97A(Hard) Wheels</p> <p></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/XsAFIXp6_nQ" title="YouTube video player" frameborder="0"></iframe></p>

<p>Mini Logo™ precision bearings are Skate Rated to Skate One specifications. They feature removable shields on both sides, high-speed molded ball retainers, and precision-ground, super-finished hardened chromium steel races and balls. For high performance out of the box, they're pre-lubricated with Bones Speed Cream. Pack of 8 bearings(for 4 wheels) Made for standard 8mm axles trucks</p>

<p>Limited reissue skateboard from 1988 Mike Vallely's Powell Peralta Pro model. This is an exact replica from the original Vallely Elephant board, pressed in the same factory in Santa Barbara USA. The Vallely is by itself part of the skateboard culture and history. Size 9.85"x30"; Wheelbase 15"; Nose Lenght 4"; Tail Lenght 6"; 7 Plies Premium Maple. Premium setting with Independent Trucks, Bones Bearings, and Powell Rat Bones 656mm 85A Wheels</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/4zL_bVEagC4" frameborder="0"></iframe></p>

<p>Powell Peralta Welinder Nordic Skull Dark Blue  9.625 "is a re-issue from the 80's. Vintage shape and highest quality construction. Single pressed using grade 1 glue and 7 plies premium US maple. This board is a blast for old school skateboarding, bowl riding, or just cruising. Premium set with Independent Trucks, Bones Redz Bearings, Powell Rat Bones 60mm Wheels</p>

<p>Make someone happy by offering a gift certificate valid on all our catalogue! Gift certificate is send by post mail (can be sent by e-mail on demand) and have 6 months validity from the purchase day. Value 100€TTC(83,33€ Off taxes)</p>