<p>Riptide Street Barrels APS Bushings. Sized to fit properly in conventional "Indy-style" trucks(Independent, Venture, Thunder, Iron, Tensor,...). Custom APS Urethane Formula for ultra-performance and sweet rebound. 975" Diameter x .5" High (24.77mm Dia x 12.7mm High). We recommend using those Street bushings board side, matching with Street Short Bushings road side. Sold as a pair of 2 bushings with washer cup</p>

<p>Venom Tall Barrel HPF bushings are made to fit on Ronin, Rogue, Kodiak, and any other trucks needed "Tall" type bushings. HPF(High Performence Formula) is especialy good for downhill riding, as it as less rebound than the HPF formula.  <strong>Set of two bushings (For one truck)</strong></p>

<p>Riptide Krank Tall barrel bushings. Riptides highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut! Those cushions are specific taller size, made to fit the following trucks: Ronin, Rogue, Arsenal, Bear Kodiak,.. <strong>Set of 2 bushings(for one truck)</strong></p>

<p>The Canon bushings are the equivalent to Riptides standard Barrel Bushing sized specifically for the seat of Paris Trucks.<strong> Set of two bushings</strong></p>

<p>Venom Plug Barrel/cone combo Bushings for Caliber Trucks(Also Fit Bear Grizzly Gen- &amp; Randal III) are designed to remove lateral play from the truck by filling the gaps between the hanger and the kingpin. Resulting in a quicker return to center, increased responsiveness, and a more direct turning feel over a traditional barrel bushing. Now available in 5 different durometers in Venom's classic HPF formula! 1 set= 2 bushings</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/HcQY55vIVbE" title="YouTube video player" frameborder="0"></iframe></p>

<p>Riptide Street Barrels/ Short Street Cone combo in APS Formula. Those bushings are a real upgrade for your skateboard trucks. The high quality urethane range from 60A(extremly soft) to 97.5A(Hard), so no matter if you are a yound kid or a fat old guy, you will get the duro that you need. Barrel/ Cone combo is a good mix between stabily and agility. Fit most " indy style" conventional trucks(Indepedendent, Venture, Tensor, Iron, Thunder,...) <strong>Set of 4 cushions with cup washers.</strong></p>

<p>Set of two RipTide Street Chubby APS Bushings specialy made to fit on Independent trucks</p> <p>Include 2 bushings and 2 flat washer rings</p>

<p>Standard replacement nut to fit on kingpins</p> <p>Sold per piece</p>

<p>Tall Barrels bushings specialy made for Ronin trucks (Cast and Billet). The barrel shape ensure maximum stability for speed and downhill use. APS Urethane. Fit Ronin Trucks, Arsenal Trucks, Bear Kodiak, Rogue,... <strong>Set of two bushings (For one single truck)</strong></p>

<p>The PSD foot stops are made out of extra hard urethane by the renown bushings company RipTide. The foot stop helps you keeping your front foot in locked place while sliding or cornering. In and out shape gives you various placement options to dial with your riding style. Sold as one foot stop including a long bolt</p>

<p style="margin-bottom:0cm;">Set of eight Longboard skateboard mounting Bolts, nuts, and washers(no washer with 2" bolts sets). Phillips Button Sockets Phillips bolts. Can be use on drop through and top mount settings</p>

<p>Set of two Angled riser Pads. 5° Wedge. 9,5mm to 14mm depth. 8 Holes. Soft duro</p>

<p>Replacement axles nuts for standard 8mm axles.</p> <p>Set of four</p>

<p><span>Orangatang Caguamaa wheels are designed for speed, grip, and an ultra-smooth ride.  Additionally, it's actually designed for the rigors of e-boarding (It's the same core as the Kegel so it'll fit many of the belt drive e-board systems out there). <strong>Set of four wheels</strong></span></p> <p></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/unlm-Mo1las" frameborder="0"></iframe></p>

<p>Riptide Street Barrels/ Short Street Cone combo in APS Formula. Those bushings are a real upgrade for your skateboard trucks. The high quality urethane range from 60A(extremly soft) to 97.5A(Hard), so no matter if you are a yound kid or a fat old guy, you will get the duro that you need. Barrel/ Cone combo is a good mix between stabily and agility. Fit most " indy style" conventional trucks(Indepedendent, Venture, Tensor, Iron, Thunder,...) <strong>Set of 4 cushions with cup washers.</strong></p>