<p>Specific 8X8mm aluminium bearings spacers. <span style="color:#d0121a;">Only match with Roller quad wheels and Kryptonic</span>, Cadillac, and Gravity (models 2005 and before) wheels. To be used with 8mm axles. The spacers will help keeping the bearings in place into the wheels, improving your riding precision. Set of four spacers</p>

<p>Bolzen Flat bushings washers. Small(0.4")=&gt; Best fit with cones bushings; Large(1"): best fit with Barrel bushings. Set of four washers</p>

<p>Set of 8 Enuff 1" Coloured Allen Key bolts and Allen Key for Skateboard Trucks</p>

<p>YOW Bearings &amp; Washers pack for skatesurf system. Spare parts for Your Yow Streetsurf <span style="color:#d0121a;"><strong>V3</strong></span>. Include 2 specifics bearings, washers, 1 bronze sleeve bearing self lub. Those parts should last forever if correctly use. Make sure to never over krank your bearings, and never let any slop in the system.</p>

<p style="margin-bottom:0cm;">Set of eight skateboard mounting Bolts and nuts. Phillips Flathead. Sizes: 1"= 2,54cm; 1 1/8"= 2,85cm ; 1.1/4"=3,17cm ; 1.1/2"=3,81cm ; 2"=5,08cm</p>

<p>Bolzen skateboard mounting hardware. Phillips flat head. 1"=&gt;Board without pads; 1.25"=&gt; Board with pads up to 1/4"; 1.75"=&gt; Board with pads up to 1/2"; 2" Board with wedged pads up to 8°; 2.5"=&gt; Board with wedged pads up to 15°; 3"=&gt; Board set with double wedged pads. <strong>Set of 8 bolts &amp; nuts</strong></p>

<p>Enuff Allen bolt set. Include 8 bolts size 1", with matching nuts and allen key. 1" is the standard size commonly used to set skateboards when not using riser pads.</p>

<p>Set of 2 Khiro Kingpins grade 8 with lock nuts</p>

<p>Independent skateboard mounting hardware. Allen flat head. Set of 8 bolts &amp; nuts+ Allen Wrench</p>

<p>Speed rings to fit on 10mm axles</p> <p>Match with Surf Rodz, Magun, Bear Smokey,..</p> <p>Set of 4 speed rings (for one truck)</p>

<p>10mm X 10mm bearing spacers <span style="color:#ff0000;">Only fits to 10mm axles trucks such as Surf Rodz 10mm, Bear Smokey, Magun </span>Match with most longboard wheels. Set of four</p>

<p>Atlas Precision small cup washers  are compatible with most standard cone bushings and are extremely rigid and durable for a great way to restrict the motion of conical bushings. Run this washer on the top of your roadside cone and tighten your kingpin nut against it. <strong>Set of two cups</strong></p>

<p>Set of 8 bolts, nuts, and nut washers specialy made for drop through type longboards. Lenght 1.125"</p>

<p>Standard aluminium bearings spacers. To be used with 8mm axles. Fit on most skateboard and longboard wheels. The spacers will help keeping the bearings in place into the wheels, improving your riding precision. Set of four spacers</p>

<div class="tab-pane fade in active" id="description"> <div class="product-description"> <p><strong>Tekton™ Precision-Profiled XT™ Steel Spacers 8x10mm.</strong> Machined from premium bearing steel and given advanced heat treatment, Tekton Precision-Profiled XT (Extra-Tough) Steel Spacers have extra-wide contact surfaces that square up against classic (non-built-in) bearings and align them far more stably than traditional thin-tube spacers formed of much softer iron or aluminum. <strong>The resulting optimized alignment means: </strong>Improved speed &amp; acceleration; More consistent wheel contact &amp; grip while cornering; More predictable slide release &amp; hookup; Longer wheel &amp; bearing life</p> </div> </div>

<p>Bushings cup washers. Set of two</p>

<p>IRON TRUCKS are the first trucks ever to be manufactured in Europe. With a high quality steel and aluminum mix, a unique shape design and the best price and quality. Size 5.25"(139mm) fit best decks ranging from 7.75" to 8.25". Truck type high. <strong>Sold as a single truck</strong></p>

<p>Powell Peralta Old School skateboard rails, color lime green. Rails help grabbin the board and protecting the deck when grinding. <strong>Set of two rails</strong></p>

<p>Speed rings to fit on standar 8mm axles.</p> <p>Match with most trucks: Paris, randal, Caliber, Tracker, Independant, Seismic, Gullwing, gunmetal,...</p> <p>Set of 4 speed rings (For one truck)</p>

<p>Standard replacement nut to fit on kingpins</p> <p>Sold per piece</p>

<p>Bushings cup washers. Set of two</p>

<p>Sk8ology skateboard deck display. All you have to do is to dril one hole to your wall.</p>

<p>The PSD foot stops are made out of extra hard urethane by the renown bushings company RipTide.</p> <p style="margin-bottom:0cm;">The foot stop helps you keeping your front foot in locked place while sliding or cornering.</p> <p style="margin-bottom:0cm;">Sold as one foot stop including a long bolt</p>

<p>Skateboard T- Tool. All in one tool to tune your skateboard. 9/16 inch kingpin socket; 1/2 inch axle nut socket; 3/8 inch hardware socket; Phillips screwdriver; Allen wrench</p>