Riptide Cones KranK Longboard Bushings

<p><span>Riptide Fat Cones have the same initial stability as a Barrel but as you lean, they offer progressively higher resistance the further you go.  <span>The Barrel / FatCone setup</span><span> is for those looking for higher stability at higher speeds but still highly maneuverable for slides, high speed carving and downhill applications.  This setup is ideal when you need to restrict the ends of the lean to prevent wheelbite or if you just like a more progressive feel to your setup. Krank Formula. Set of 2 bushings with washers</span></span></p>

<p>Hamboards springsets are available in two different hardnesses, Silver and Gold. The Silver version has a rebound force of 20 pounds where the gold version has a rebound force of 25 pounds. Both versions are pre-set so you don't have to break them in and with proper maintenance they won't wear out.</p>

<p>Longboard bushings Blood Orange Cone shape with Ultra High Rebound Formula. Fit most longboard trucks. The cone shape is nice far carving and dancing. You can mix a barrel board side and a cone road side for a good balence stability / Agility. <strong>Set o 2 cones bushings</strong></p>

<p>Spare spring for slide surfskate wave truck Gen 2.0</p>

<p>Venom Downhill Barrels SHR longboard skate bushings. Standard height compatible with most longboard trucks (Paris, Caliber, Bear Grizzly Gen 6, Atlas,...). The cylindrical shape offers maximum stability and is the most popular in DH and Freeride. The SHR (Super High Rebound) formula allows the bushing to return to its original shape even more quickly. Thanks to this formula, the truck still turns as much, but gains in stability. Sold in pairs (2 Cushions)</p>

<p>RipTide Cones are a classic shape for carving and slalom. It ensure a maximum turnability and rebound. <strong>Set of two (For one truck)</strong></p>

<p>Tall Cones bushings would fitspecifics trucks such as Ronin, Rogue, Arsenal, Bear Kodiak,... The cone shape would let you turn deeper and works great for carving. APS is a lively and responsive, high-performance urethane with just the right amount of rebound. Very linear in response so you can control the bushing instead of the other way around. <strong>Set of two bushings (For one single truck)</strong></p>

<p>Carver CX/C2 bushing set standard. This set is made of 2 pivot cups, 2 C5, 92A Top Cones, 2 92A Bottoms Barrels, 1 Flat Washer. This setting is equivalent to the original's.</p>

<p>Set of 8 bolts, nuts, and nut washers specialy made for drop through type longboards. Lenght 1.125"</p>

<p>The 50° 180mm Paris V3 is everything a longboard truck should be: playful, lively, smooth, and strong. This is a perfect all-around truck for carving, cruising, dancing, freeride, slides... <strong>S<span xml:lang="en" lang="en">old individually</span></strong></p>

<p>Independent skateboard mounting hardware. Phillips flat head. Set of 8 bolts &amp; nuts</p>

<p>Set of two skateboard's flat shock pads 1/8" (3mm) depth. Helps reduce vibrations and avoive wheel bites.</p>

<p>The magnum bushings are an adaptation to Riptides Chubby Bushing sized specifically for the seat of Paris Trucks.</p> <p>Set of two bushings (For one truck)</p>

<p>Seismic Lokton is noticeably sharper, tougher, and grippier. Grit stays ultra-sharp, doesn’t flake off. No smearing or peeling, even in heat or rain. The bestdownhill longboarding grip in the history of grip. Lock in with Lokton™! Midnigh blue color. Honeycomb laser cuts offer 40% weight saving and increase grip. <strong>Three 11" x 11" sheets pack</strong></p>

<p>Riptide Pivot Cups for Carver C7.3/C2.4 trucks. Made of urethane, cups helps trucks being more accurate and minimise vibrations. <strong>Set of two cups.</strong></p>

<p>To keep the best feeling with your YOW Surfskate, we recommend to regulary change your Yow Spring. <strong>Pack of 3 springs+Nuts, <span style="color:#d0121a;">ONLY FITS YOW V4 &amp; MERAKI SYSTEM. Spring size must be the same as the one from the purchased system. 4mm=Soft; 5mm=Hard</span></strong></p>