<p><span>Triple Eight Roller Derby specific Helmet with visor. Lightweight, Anti-Fog, Impact Resistant. This Visor helmet has been developed with the top skaters across the league from Gotham Girls, Rose City, and Team USA. It’s the most comfortable, best fitting, lowest-profile visor helmet available.</span></p>

<p>This Sure-Grip toe stop screws will allow you to keep your stoppers in place on most Sure Grip plates. Only compatible with the following plates: Avanti, Avenger, Competitor, Cenury, Classic, Cyclone, Magnum, Invader. <strong>Set of two srews</strong></p>

<p>Jam skating or training without toe stops, these Sure-Grip Super-X Dance Plugs will protect your floors and your plates. Metal stem diameter 5/16" with a rubber micro stopper. Fit plates using bell stoppers such as Impala, Rookie, some Rio skates,.... <strong>Do not fits</strong> Powerdyne Thrust/Triton/Dynapro plates, and Sure-Grip Plates.  <strong>Sold in Pairs</strong></p> <p></p>

<p>Sure-Grip barrel cushions made to fit on the following Suregrip plates: Super X, Rock, Jogger, Century, XK4, Competitor. Use Barrels on both side for more stability, or mix barrel/Roller skate side/Cone floor side for more manoeuvrability. <strong>Set of 2 cushions</strong>. Made in USA</p>

<p><span><span><span style="font-size:14px;"><span style="font-family:verdana, geneva, sans-serif;">These Suregrip Super 535 cone cushions are made of an advanced high rebound clear urethane that provides greater turning while increasing the return energy upon compression. These cushions are state of the art and incorporate an entirely new type of high rebound urethane, unlike anything ever made. These super cushions provide more durability over standard cushions. <strong>Set of two bushings</strong></span></span></span></span></p>

<p><span><span><span style="font-size:14px;"><span style="font-family:verdana, geneva, sans-serif;">These Suregrip Super 535 cone cushions are made of an advanced high rebound clear urethane that provides greater turning while increasing the return energy upon compression. These cushions are state of the art and incorporate an entirely new type of high rebound urethane, unlike anything ever made. These super cushions provide more durability over standard cushions. <strong>Set of two bushings</strong></span></span></span></span></p>

<p>Sure-Grip Rebel is an all-time favorite boot, the Rebel is made with leather and features a Velcro strap for a secure fit. An ultra-comfort collar and interior padding give the Rebel an immediate comfortable fit with no break in time</p>

<p>Classic style rear brake bracket set with Suregrip Bullseye Bell stopper. It is of industry standard and should fit 99% of all quad roller skates using aluminium trucks. <strong>Sold singly</strong></p> <p><strong></strong></p>

<p><b>Probe Plate</b> for Roller Skate from Sure Grip. The Probe Plate is made of <span>Super tough nylon</span>, A 10 degree double action aluminium cast trucks, 88A <span>Urethane cushions, 5/8" </span><span>Replaceable toe-stop insert</span><span>(toe stop not included), </span><span>8mm axles. </span><b>Made in the USA</b></p>

<p>Replacement standard PVC pivot cups for Suregrip Robe &amp; Probe plates(the one who comes has standard on most Sure-Grip rollerskates). Size: Ouside diameter 14mm; Inside diameter 8mm; heights 17.5mm. <strong>Set of 2 cups(for one plate)</strong></p>

<p><span><span style="text-align:left;text-indent:0px;float:none;background-color:#ffffff;"><span style="text-align:left;text-indent:0px;float:none;background-color:#ffffff;">The Suregrip Park Series truck is designed specifically for park skating. Made to accommodate all 10-degree standard plates(Avanti, Rock,...). Unique 3” truck design is the perfect size for grinding while not setting your wheels too far apart. The truck sits slightly higher than a standard truck which allows for more kingpin clearance than anything on the market. <strong>Sold as a single truck</strong><br /></span></span></span></p>

<p><span>Washers used on the pivot pin to help secure the pin from moving in and out. This is a necessary part when using a truck with an adjustable pivot pin such as Sure-Grip Avenger, Avanti Magnesium,... 4Pk</span></p>

<p>Sure-Grip replacement insoles. These are the same contour insoles that come standard with your new skates. Ideal for those who want a little more padding or just looking to replace their warn out insoles.. <strong>Set of 2</strong></p>

<p><span><span style="text-align:left;text-indent:0px;float:none;background-color:#ffffff;"><span style="text-align:left;text-indent:0px;float:none;background-color:#ffffff;">The Suregrip Huck 3" trucks are designed specifically for park skating. Made to accommodate all 10-degree standard plates (Avanti, Rock,...). Unique 3” truck design is the perfect size for grinding while not setting your wheels too far apart. The truck sits slightly higher than a standard truck which allows for more kingpin clearance than anything on the market. <strong>Sold as a set of 4 trucks with 4 rubber pivot cups.</strong><br /></span></span></span></p>

<p>Jam skater extraordinaire or training without toe stops, these Sure-Grip Fomac Dance Plugs will protect your floors and your plates. Diameter 5/8". Fits Powerdyne Thrust/Triton/Dynapro plates, and Sure-Grip Plates. Do not fit plates using bell stoppers or stoppes requiring allen wrench to tighten. <strong>Sold in Pairs</strong></p>

<p>Jam skating or training without toe stops, these Sure-Grip Fomac Dance Plugs will protect your floors and your plates. Stem diameter 5/16". Fit plates using bell stoppers such as Impala, Rookie, some Rio skates,.... <strong>Do not fits</strong> Powerdyne Thrust/Triton/Dynapro plates, and Sure-Grip Plates.  <strong>Sold in Pairs</strong></p> <p></p>

<p>Sure-Grip Delrin Press fit pivot cups. Fit all DA-45 plates, Avenger series, Avanti Magnesium, Invader, XK-4. Delrin cup are more precise and more durable than standard PVC cups. <strong>Set of 2 cups(for one plate)</strong></p>

<p>Sure-Grip DA45 Hanger. Standard 8mm axle. Adjustable pivot. Can fit the following Suregrip plates: Avender, Invader, XK-4 DA45. <strong>Sold individualy and without axle nut<br /></strong></p>

<p><span>Sure-Grip Bullseye Toe stop for use on Super-X or Probe 5/16 specific plates or other bolt on toe-stop plates. <strong>Sold singly and without bolt</strong>. Made in the USA.</span></p>

<p><span>One pair of Non-slip rubber on these laces to keep your laces tight.</span> Botanical Leaves Graphic. Lenght 72"</p>

<p>The Sure-Grip Avenger Magnesium Plate is an extra light weight skate plate that utilizes the 45-degree kingpin design. The Avenger was created for speed skating and roller derby. Every inch of the Avenger have a purpose - thickness, heights, lengths, angles, and material were all chosen for their unique properties. The result is a super agile, super light, track-hugging super plate.</p>

<p>The Sure-Grip Avenger Aluminum Plate is a light weight skate plate that utilizes the 45-degree kingpin design. The Avenger was created for speed skating and roller derby. Suregrip designed every inch of the Avenger to have a purpose - thickness, heights, lengths, angles, and material were all chosen for their unique properties. The result is a super agile, super light, track-hugging super plate.</p>

<p>The Sure-Grip Avanti Aluminum Plate is a 10° double-action plate built to last. This model offers a sleek polished finish and includes fixed pivot aluminum trucks (8mm), black anodized axle nuts, 85A Super Cushions, a Carrera toe stop, basic tools, and even mounting hardware! This is choice plates for park &amp; cruising. <strong>Set of two plates</strong></p>

<p>Set of height Spitfire Classics bearings Abec5. Good strenght and fast rolling. All you need for skateboarding</p>

<p>Spitfire Burners Abec7, precision bearings, super fast, high resistance to impacts, removable nylon cage for easy cleanning. <strong>Set of height bearings</strong></p>

<p>See a shooting star, close your eyes and make a wish. Did it come true yet?! OK, our shipping isn't THAT fast, but we know you wished for these knee high socks! All your dreams can come true. The majesty of the night sky can now hug your calves like a starry blanket. 56% Cotton, 42% Polyester, 2% Spandex. Approximately fits women's shoe size 5-10.</p>

<p>Protect your caps with these Recaps. Fits snugly over our Elite Knee caps.  These are made to fit the Original Elite knee pads.  Its recommended to apply the recap to a new set of Elite knee pads to help extend the life of the caps.  Apply with a double sided tape already adhered to the cap.  Just peel and stick the cap right on the riveted cap.  <span>Sold In Sets of 2.</span></p>

<p>Skateboard T- Tool. All in one tool to tune your skateboard. 9/16 inch kingpin socket; 1/2 inch axle nut socket; 3/8 inch hardware socket; Phillips screwdriver; Allen wrench</p>

<p>Skanunu Protect, clean, and lube your bearings. Very easy to use.</p>

<p>Skanunu Protect, clean, and lube your bearings. Very easy to use. 5.9ml mini bottle</p>

<p>Cute women's socks with embroidered hearts. Soft to the touch. Composition: 66% Cotton, 32% Polyester, 2% Elastane. Reinforced toe and heel. Comfortable. Stays in place on the calf. Oeko-Tex 100 certified. One size fits all (35 to 40). Sock It To Me is an American brand with a quirky and fun style, advocating for the values of racial and gender tolerance and inclusion.</p>

<p>The Sock It To Me Space Cats women's socks are completely crazy and psychedelic! Featuring a pattern of cats conquering space in a retro gaming style, these socks boast vibrant colors and a shiny effect. Made of 53% cotton, 6% metallic thread, 39% polyester, and 2% elastane, they have reinforced toe and heel for durability. Comfortable and securely fitting on the calf, these socks are certified Oeko-Tex 100. They come in a one-size-fits-all (sizes 35 to 40). Sock It To Me is an American brand with a quirky and fun style, advocating for values of racial and gender tolerance and inclusion.</p>

<p>Sock It To "Red panda pose" graphics Women Knee high socks. 54% Cotton, 43% Polyester, 3% Spandex. Certified by OEKO-TEX Standard 100, which means it leaves out harmful chemicals to keep your skin safe and happy. Reinforced 2-ply heel and toe for durability. Approximately fits up to women's shoe size 10</p> <p></p> <p></p> <p></p> <p></p>

<p>Cute and whimsical women's novelty socks featuring llama disguised as a unicorn patterns. Metallic threads provide a beautifully shiny effect. Composition: 49% Cotton, 38% Polyester, 10% Metal Thread, 3% Elastane. Reinforced toe and heel. Comfortable fit. Stays securely in place on the calf. Certified Oeko-Tex 100. One size fits shoe sizes 35 to 40. Sock It To Me is an American brand with a quirky and fun style, advocating for the values of racial and gender tolerance and inclusion.</p>

<p>High socks for women, mid-calf style. Fancy pattern with a shimmer effect. Illustration of a majestic bird, the Crowned Crane. Composition: 55% cotton, 37% polyester, 5% metallic thread, 3% elastane. One size fits most women (EU 35 to 40). Certified OEKO-TEX Standard 100. Does not leave traces of toxic substances on the skin. Heel and toe reinforced. Sock It To Me is an American brand with a creative and quirky style, advocating for values of interracial and intergender equality.</p>

<p>Sock It To Me 'Area 51' High Socks - Unisex Mid-Calf Style for Women / Men. Ultra-stretch calf circumference that adapts to all leg widths without distorting the design. Colorful illustration on the theme of aliens and the paranormal. Composition: 60% Cotton, 37% Polyester, 3% Elastane. One size fits 37 to 46. Sock It To Me is an American brand with a creative and quirky style, advocating for interracial and intergender equality.</p>

<p>"Naughty or Nice?" Women Knee high socks. 59% Cotton, 38% Polyester, 3% Spandex. Certified by OEKO-TEX Standard 100, which means it leaves out harmful chemicals to keep your skin safe and happy. Approximately fits up to women's shoe size 10</p>

<p>"Kitty Cone" Women Knee high socks. 57% Cotton, 40% Polyester, 3% Spandex. Certified by OEKO-TEX Standard 100, which means it leaves out harmful chemicals to keep your skin safe and happy. Approximately fits up to women's shoe size 10</p>

<p>Shoe Goo shoe repair glue, color clear. Skateboarders use Shoe Goo on their skate shoes to both protect and repair damage done by the sandpaper-like  Griptape of the skateboard. Very easy to use. Tube contain 29.5ml<span style="color:#808080;"><br /></span></p>

<p>Shoe Goo shoe repair glue, color clear. Skateboarders use Shoe Goo on their skate shoes to both protect and repair damage done by the sandpaper-like  Griptape of the skateboard. Very easy to use. Tube contain 109.4ml<span style="color:#808080;"><br /></span></p>

<p>Shoe Goo II shoe repair glue. Skateboarders use Shoe Goo on their skate shoes to both protect and repair damage done by the sandpaper-like  Griptape of the skateboard. Very easy to use. Tube contain 59ml<span style="color:#808080;"><br /></span></p>

<p>Shoe Goo II shoe repair glue. Skateboarders use Shoe Goo on their skate shoes to both protect and repair damage done by the sandpaper-like  Griptape of the skateboard. Very easy to use. Tube contain 26.6ml<span style="color:#808080;"><br /></span></p>

<p>The SFR Stomper is the perfect skate for small feet! It has a wider rear axle so that the rear wheels act as stabilisers, making them the perfect first skate! They are fitted with an easy to use size-adjuster system; simply press in the locking button and slide the skate to increase or decrease the size, meaning that the skates can grow with your feet. They also feature easy to use buckles, making these skates a breeze to put on.</p>

<p><span>This is S1 Lifer Helmet W/ Visor Gen 2. This is the second edition of this Roller Derby oriented helmet and has been completely redesigned from the original version. Each helmet will come with a carrying bag, mounting hardware, a micro fiber cloth and three top pads in varying thickness's to affect how deep or shallow you want the helmet to sit on your head.</span></p>

<p>Special Roller Derby Helmet S1 Lifer with Eye Protection Visor. Like all S-One helmets, the Lifer with Visor is certified for both small repeated impacts and a single large impact. Screen treated for anti-fog and anti-scratch. Transport bag, microfiber cloth, and 3 visor adjustment foams are included. Finished with glitter. Aesthetic and effective, the Lifer with Visor is the ultimate protection for roller derby enthusiasts.</p>

<p><span>This is S1 Lifer Helmet W/ Visor Gen 2. This is the second edition of this Roller Derby oriented helmet and has been completely redesigned from the original version. Each helmet will come with a carrying bag, mounting hardware, a micro fiber cloth and three top pads in varying thickness's to affect how deep or shallow you want the helmet to sit on your head.</span></p>

<p>The S1 Lifer is one of the best fitting and safest helmets for skateboarding, BMX, and Roller Derby. It uses a special formulated EPS fusion foam wich allows it to protect the head from multiple low force impacts as well as high impacts. Color: Black Matte</p> <p></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/Hnp4ht0AnUg" title="YouTube video player" frameborder="0"></iframe></p>

<p>Rookie Adjustable toe stoppers for roller skates. 25mm long stem with 5/8" diameter and imperial(US) thread. Made of rubber. Round shape for easy pivoting. The stoppers pads are 42mm wide and 25mm high. Set of 2 stoppers with nuts and washers.</p>

<p>Rookie Rollerskates Passion Size Adjustable Rollerskates. Now you can have the look and feel of an Artistic styled boot with the convieance of size adjustability. Feature a unique adjustment system within the boot that is easily used to fine tune the size of the skate through its size range. Synthetic padded soft boot with fleece lining, PU cast Wheels 58 x 32mm 82A , Nylon plates &amp; Trucks, Abec 5 Bearings, PU Bell stopper. Vegan Friendly</p>

<p>The Rookie Legacy skate has an eye-catching printed tie-dye material upper with extra padding providing incredible comfort. Iconic PVC stripes and a trainer-style midsole give these skates a cool retro aesthetic. Ideal first skate for recreational use, aimed at beginners to intermediate skaters. Synthetic padded soft boot with extra ankle and achilles protection. PU cast Wheels 58x32mm 80a; High Impact Nylon plates with aluminium Trucks, PU Bell Stoppers; Abec 7 Bearings. 100% Vegan</p>