Sure-Grip Lock Washers 5/16"(4Pk)

<p>Roll Line Mounting Hardware for Roller Skates. Roll Line bolts are diameter 3.5mm, witch is a little bit thinner than the US standard. This hardware is matching with the Roll line plates holes. Set of 12 Bolts(4 long+8 short) with nuts and washers.</p>

<p>Mounting Hardware set for Roller Skates. Must be use with hard sole shoes such as Roller Derby and Artistic boots. Include 12 phillips head bolts(8x3.5m + 4x6.9cm) with washers and nuts.</p>

<p>This Roll Line toe stop screws will allow you to keep your stoppers in place on most Roll Line plates. <strong>Set of two srews</strong></p>

<p>Bushings cup washers. Set of two</p>

<p>Click Action washer cups. Fits any Roll Line plates using the click action system: Killer(Steel &amp; Titanium), Mistral, Energy(Steel &amp; Titanium), Dance, Matrix(Steet &amp; Titanium), Evo, Raffaello, Ring, Saturno, Giotto, Spin. Set of 4 wahers</p>

<p>Roll Line Kingpin nut locking screws for Blaster/Killer/Variant plates. Set of two(for one plate)</p>

<p>This Pilot toe stop screws will allow you to keep your stoppers in place on Pilot Falcon plates. <strong>Set of two srews</strong></p>

<p>Bont Ignite Roller skate Mounting Hardware. Including 4 long bolts, 4 short bolts, 8 self locking nuts</p>

<p>This Sure-Grip toe stop screws will allow you to keep your stoppers in place on most Sure Grip plates. Only compatible with the following plates: Avanti, Avenger, Competitor, Cenury, Classic, Cyclone, Magnum, Invader. <strong>Set of two srews</strong></p>

<p>Replacement axles nuts for standard 8mm axles.</p> <p>Set of four</p>

<p>Radar Mini Wheel Bag. Fit 8 roller skate wheels + tool or bearings set. Easy access to the wheels.</p>