Pantheon Pranayama 31.37" Patanjali Complete Longboard

The Prayanama is a LDP board made for the ones who want to go further with their skateboard. Ultra low plateform made to be used with 149mm TKP trucks(Paris Street 149) and large wheels(80 to 85mm).

€388.90
€374.95
Save €13.95
Tax included
In stock online & in shop

Pack description

The Prayanama is a LDP board made for the ones who want to go further with their skateboard. Ultra low plateform made to be used with 149mm TKP trucks(Paris Street 149) and large wheels(80 to 85mm).

Pack content

Setup Advice

The Pranayama is truly optimized on Paris 149mm trucks and your choice of any color and durometer (softness) of either the 85mm Seismic Speed Vents OR the 85mm Orangatang Caguama wheels. Paris are notoriously high TKP trucks, so if you want a lower setup, you can try a classic Independent 149mm as well, but really, we love the turn on Paris so much that if wanted it to be lower, we would just pick a slightly smaller wheels like the Orangatang 80mm Kegel or the new 80.5mm Seismic Alpha, or put a little drop through riser on the board. We do feel, though, that most will appreciate the stock height and feel of the suggested setups. It is unlikely that it can get any better, but we will pay attention to reviews and our own experiences and modify this section if necessary.

DESIGNED AROUND TRADITIONAL STREET TRUCKS ONLY! Don’t MAKE THE PANTHEON GUYS come after you for setting this up wrong!

Specs

Length: 79.7 cm / 31.375"
Width: 23.5 cm / 9.25"
Wheelbase: 66 cm / 23.5"
Construction: 9-ply Maple
Gripped: Yes

Drop: 1.3 inch crescent
Profile: Slight Mustache Camber/Rocker

Data sheet

Lenght
31.375
Width
9.25"(23,49cm)
Wheelbase
26"
Griptape
Included
Disciplines
LDP
Kicks
No Kick
Mounting of Trucks
Drop Through

The Paris Street Truck Family will allow you to take your Combine, Hybrid, Street or Mini to new levels. With a taller profile than standard conventional trucks, risers may not be needed.

Bigger Wheels? NO PROBLEM! Now roll easy to those hard to get places with better maneuverability and better turnability. You’ll get a better ride every time. It’s time to make the switch!

  • 356.2 virgin aluminum gravity molded baseplate and hanger.

  • Secondary heat treatment process for added strength and durability.

  • Heat–treated to Rockwell rating T6 for hangers, and T5 for baseplates.

  • Grade 8 axles and branded kingpins.

  • 6 hole pattern – new school and old school

  • 93A Divine urethane bushings.

  • Tall – 57.15 mm axle height for added wheel size capability.

This 149mm version gives best results on street boards and decks width ranging from 8.25'' to 9''

Sold as a single truck

Data sheet

Width
149mm(5.87")
Construction
Cast Aluminium
Disciplines
Bowl, LDP, Cruiser, Pumptrack
Geometry
Traditional
Bushings Heights & Shapes
Street Height, Cone, Barrel
Trucks Axles Diameter
8mm(Standard)

Abec 7 Skateboard & Roller skate bearings type 608. Fit on most wheels and trucks. Steel balls and nylon shields on both sides. The highest quality that you can get for this value. Set of 8 Bearings(for 4 wheels)

Data sheet

Trucks Axles Diameter
8mm(Standard)
Balls material
Steel
Built-In Spacers?
Without Built-In Spacers

85mm tall x 52mm wide Seismic Speed Vent Wheels.

Offset bearing seat, dual lip design.
7.1 oz. each. Sold in sets of FOUR wheels.

The 85mm by 52mm Seismic Speed Vent is molded around the proprietary weight-saving Energy Conversion (EC) hub – possibly the raciest, sexiest hub on the market. The 85mm diameter gives it the roll speed of a downhill wheel, while the weight-saving hub adds the quickness and agility of a smaller wheel, as well as enhanced rebound. Combined with lips designed for pure grip, the Speed Vent is utterly unique among high-end wheels. Breakthrough performance for longboarding, downhill, GS, LDP, and even Hybrid slalom.

Data sheet

Width
52mm
Contact Patch
50mm
Core Placement
Off-set
Lip profile
Square Lip
Wheel surface
Smooth
Diameter
85mm
Durometer(s)
Blue 75A BlackOps; Pink 77A Defcon; Mango 78.5A Defcon
Disciplines
Downhill, E-Skateboard, LDP
Gap width between bearing seats
10mm(Skateboard/Longboard standard)
Grip level
5/5