Hovland The Club 9.5" x 37" Snowskate

<p>Harfang snowskate 1/2" riser pads to place between the trucks and the top deck. Using riser pads enhance the leverage for more agility, and let you ride on steeper hills. size 1.375″ x 2.625″ x 1/2″ thickness. Hole pattern : 1.625″(matching with M6 hardware). Made in Canada. <strong>Set of 2 pads</strong></p>

<p>The Ram Hawk is wide and stable, but also soft and poppy. It is Hovland's most versatile snowskate made to rally the whole mountain from the park to shallow pow. 105cm sub deck. Polar core with Triaxial Fiberglass. It is fully wrap with stainless steel edges and has urethane siewalls. 3 inserts setup options. Compatible with Harfang trucks. Insert placements are matching with any Hovland top decks</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/bmKspscSR4o?si=-hhH5zEGLV2LZcK2" title="YouTube video player" frameborder="0"></iframe></p>

<p>Harfang hardware to assemble snowskate trucks with the top deck. M6(metric 6mm) stainless steel bolts with philips flat heads. This is the standard size used for snowskate mountings. If you are using a skateboard deck as the top deck, you will need the widen the mouting holes to 6mm. use lenght size 25mm if you do not use riser pads, or 35mm if you are using 1/2" riser pad. <strong>Set of 4 bolts with nuts</strong></p>

<p>Injection molded polyurethane studded ‘Prism’ stomp pad. Color: Clear.Designed and made in Canada by Harfang Solutions for the harshest environments and weather conditions. The studs will enhance your snowskating with added grip and traction under your feet for maximum control and trick consistency. Easy to cut and stick directly onto your snowskate’s foam grip. Follow our recommeded setup or get creative and customize to your own riding style. Includes two 5in x 9in sheets with adhesive backing for a total of 90 studs.</p>

<p>Harfang sub-ski assembly hardware. Used to fasten the snowskate trucks to the sub-deck. Full Thread, Stainless steel A2. Teflon thread lock. Use M6 x 16mm (with included washers) for actual Harfang Trucks, or M6 x 25mm (without washers) for older versions. Set of 4 bolts(for to trucks). Use wrench tool N°10</p>

<p>Harfang Dual-decks type allround snowskate with Native graphic. 7 Plys maple 35" x 9.375" top deck mounted on a 43"(109.5cm) twin tip sub deck width 15.3cm x 12.3cm x 15.3cm. This Harfang snowskate is easy to ride, no matter if you are a beginner or a pro. You will enjoy carving on the slopes, doing tricks at the park. The board is set with Harfang Claw trucks and come with a leash for your(and other surounndings users) safety. The top deck is covered with EVA foam. For Logistical reasons, the snowskate is delivred as a kit with mounting screws. Assembly is very simple and only requires a screwdrider and a N°10 Wrench</p> <p></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/aolafAypEW0" title="YouTube video player" frameborder="0"></iframe></p>

<p>The Hovland Five-Oh Snowskate is made for flip tricks, jumps, rails, ramps and boxes in the park, but will get you around the mountain as well. This sub-deck is 92cm long with a sintered base. It has a Polar core, biaxle &amp; triaxle fiberglass, urethane sidewalls, fully wrapped stainless steel edges, 3 insert options. <strong>Sub deck only</strong>. To build a complete snowskate from this sub deck, you will need to had trucks(compatible with Harfang), Top deck, and a leash.</p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/TSXf3vsDysg" title="YouTube video player" frameborder="0"></iframe></p>

<p>The Hovland Five-Oh Snowskate is made for flip tricks, jumps, rails, ramps and boxes in the park, but will get you around the mountain as well. Top deck is made of 7-ply maple + EVA Foam grip, size 9.5" x 35.5", deep concave, steep kicks, 3 mounting options. The sib-deck is 92cm long with a sintered base. Sub-deck has a Polar core, biaxle &amp; triaxle fiberglass, urethane sidewalls, fully wrapped stainless steel edges, 3 insert options. Harfang 2" tall trucks. Leash included. For Logistical reasons, the snowskate is delivred as a kit with mounting screws. Assembly is very simple and only requires a screwdrider and a N°10 Wrench</p> <p></p> <p><iframe width="560" height="315" src="https://www.youtube.com/embed/TSXf3vsDysg" title="YouTube video player" frameborder="0"></iframe></p>

<p>The Landyachtz Hammer Foam Grip Tape makes your board even more comfortable! A layer of soft foam is underneath the gritty top layer adds comfy to your longboard ride. This grip pack can also be used to make awesome 3D concaves! Add the grip first, then apply a Vicious or other super sticky grip to it to create a raised effect that'll help lock in feet. <strong>2 sheets 11"x11"</strong></p>

<p>Injection molded polyurethane studded ‘Prism’ stomp pad. Designed and made in Canada by Harfang Solutions for the harshest environments and weather conditions. The studs will enhance your snowskating with added grip and traction under your feet for maximum control and trick consistency. Easy to cut and stick directly onto your snowskate’s foam grip. Follow our recommeded setup or get creative and customize to your own riding style. Includes two 5in x 9in sheets with adhesive backing for a total of 90 studs.</p>